How to reinstall Windows from a flash drive

Reinstalling Windows via USBFailures in the computer are not uncommon. That antivirus will give mist, and the viruses will settle in the system, the program will be installed incorrectly and starts to spam in the form of error messages, then after the next Windows update will resign. Anyway, one of the solutions of the problems still remains reinstalling Windows. It seems to be simply: they swam, we knew the installation disk more than once. Only this tricky focus is not always triggered. Nubbooks After all without DVD drives. So comes to mind question, but how to reinstall on PC Windows from the flash drive? In fact, very simple.

Step number 1: Prepare the computer

Let's start with a banal action - from copying data from a local disk C. For someone, it can also be news that after reinstalling Windows all information on the hard disk will be deleted. But we know well with you well and therefore do not forget to take care of the backup storage of important documents and files from the work disk C.

Step number 2: Create a bootable flash drive

It is no secret that it is possible to make an ordinary flash drive with a variety of methods. Anyway, all source data on it is deleted regardless of the method used. At the same time, to record the Windows boot image on a USB media, such methods are most often used as:

  • Configure via the command line;
  • Treatment in utility Rufus. ;
  • Record ISO-image on a flash drive through Daemon Tools. ;
  • Record in the program Ultraiso. ;
  • Preparation using the program Windows 7 USB / DVD DOWNLOAD TOOL ;

Each of these methods, of course, has its advantages. However, the easiest way, perhaps, use to record the bootable flash drives such utilities as RUFUS and Daemon Tools. If you want to experience other methods, read here.

Option number 1: Daemon Tools Ultra

You can download the program directly from the official site. In fact, it is paid, but developers provide users with the opportunity to test it for free for 20 days. Agree, during this time, it is not that one, but a whole ton of flash drives can be prepared.

How to work with Daemon Tools Ultra? Quite simple. We open the program, go to the "Tools" menu and select the item "Write a boot image ...":

Daemon Tools Ultra.

After that, insert a flash drive with a memory capacity from 8 GB to the computer and alternately perform such actions in the program:

  1. Choose a USB drive;
  2. We prescribe the way to access the loading image of Windows;
  3. set the MBR parameter to record;
  4. We put a tick opposite the "Format" item;
  5. Select the file system. For those who do not know what the difference between FAT32 from NTFS and some of them give preference, explain. The first type of file system is suitable for computers with standard BIOS. In UEFI devices with NTFS are often not read. But FAT32 can also be used in that, in another version of the bios;
  6. If necessary, we prescribe a volume label (rename flash drive);
  7. We check the presence of free space on a USB media and press the "Start" button.

It looks like this process as follows:

Record of the USB boot image in Daemon Tools

In principle, this is all that will need, after clicking on the "Start", the image of Windows will begin to record on the USB flash drive in automatic mode:

Progress recording

It remains only to wait for Windows Recording on the USB flash drive, and then click the "Finish" button:

Successful completion of the operation

Easier simple, right?

Option 2: RUFUS

No less convenient to create a USB media with ISO-way Windows through the RUFUS 1.4.12 program. You can download it and you can absolutely free from the official site of the developer. The instruction on it looks like this:

  1. We open the program and simultaneously connect a flash drive to a computer;
  2. In the appeared window we prescribe the path to it, select the desired file system and set other settings: Interface RUFUS.
  3. Select the Windows image file and click "Start": Select image file
  4. We wait for the end of the recording process and close the program.

Step number 3: Customize the launch of the computer

After the installation USB carrier with the Windows image is ready, you can safely be taken to edit the computer boot process. Note that you can set the launch from the flash drive in different ways:

  1. with hot keys;
  2. through bios.

In the first case, when the PC is loaded, it is enough to press a special button, and then from the proposed options to select Start from the USB drive. As a hint:

BIOS launch keys

In the second case, in order to enter the BIOS, at the time of loading the computer, you will need to press the F1 / Del / F2 / F3 / TAB + F2 / ESC on the keyboard. The key combinations may differ depending on the PC manufacturer, as, however, and options for action after opening the program itself. True, the reason for the discrepancies will be different - a different interface in Bios versions (Award, Ami, Phoenix-Award, UEFI).

In UEFI, for example, setting up a PC load from flash media will be like this:

  1. go to the boot section;
  2. Open the Boot Option 1 tab and call the PC boot menu by pressing ENTER;
  3. With the help of arrows  и We choose the USB drive prepared by us with the Windows image and press ENTER: ASRock UEFI SETUP UTILITY
  4. Click F10 to save the settings and exit from the BIOS.

That's all that we need to reinstall Windows on our computer. After setting the launch from the PC installation flax, the PC is fully ready for reinstalling Windows.

Step number 4: Re-install the operating system

For those who at least once installed Windows independently, reinstall it on the computer will not be any difficulty, because there will be exactly the same way:

  1. Loading from the flash drive, and then select the Windows installation language;
  2. In the window that appears, click "Set";
  3. We accept license terms;
  4. Click "Full Installation": Installation process
  5. format hard drive: Formatting a disc partition
  6. Enter additional data (name, password, activation key, date, time), and then configure the network.

In principle, nothing supernatural. All actions arise from the installer itself. However, if something suddenly does not work, the little thing is forgotten where, what, how, read this article. It describes and illustrate all the subtleties of the installation process.

Installing Windows 7 from a flash drive

Installing Windows 7 from a flash drive Installation Windows 7 from a flash drive is a very simple process that requires only attentiveness when reading this article and a clear fulfillment of simple step-by-step instructions.

Conditionally, the whole process can be divided into several steps.

  1. Saving all important data.
  2. Creating a bootable media.
  3. Installing Windows 7.
  4. Custom settings.
  5. Installing drivers.

Preparatory stages

We will disassemble all the stages in detail and do not suit the most interesting immediately.

If you reinstall Windows, we need to save all important files and documents, photos and videos.

You can do this in several ways.

1Transfer everything to the cloud.

This is a cloudy repository in which all data will be saved.

Lots of similar services: it is Yandex.Disk, OneDrive, Dropbox, Mail.Ru cloud, Google Disc, ICloud and many others.

Here we will not describe how to do it, otherwise the article will be disproportionately large.

2Record all for removable media: CD or USB flash drive, or on a removable USB hard disk.

3To transfer all the data to other logical media if you format the system disk (usually it is a C :) drive. To the contents ↑

Creating a bootable flash drive in Ultraiso

Further, we will need the image of Windows 7, which can be downloaded on the official website of Microsoft, and the flash drive itself with a volume of at least 4 GB. Windows 7 is popular until now. She almost immediately won the minds and the hearts of most users who called it the best operating system.

At one time, Windows 7 was installed on more than 70% of computers in the world. Almost every second user, for sure, the disk has been preserved, it can be recorded on the USB flash drive and then install it on the computer. Firstly, modern computers and laptops are sold for a long time without optical drives.

Secondly - on those devices where the drives are still preserved, due to long downtime (disks are not used almost anywhere), they can sum up: the installation process can pass with errors due to dust in the drive or invisible scratch on the disk - better Install from flash drive.

For recording, we will need Ultraiso. This is not the only program to create loading media, there are a lot of them, but in most cases it is either paid products or complex in control, or English-speaking. Optimal option - Ultraiso

. It is conditionally free, in " Trial You can use infinitely.

At the very least, there were no restrictions in the trial period mode for an ordinary user.

1Downloaded the program. Installed. Double-click launch the label on the desktop.

2In the program window click on the button "File" . In the drop-down context menu, select the item "Open" .

Open "Open"

Open "Open"

3The Explorer window will open, go here to the section with in our way, click on it and click again "Open" . The image will boot into the program.

Select image

Choose the presentation of the table.

Record hard disk

1Next, we need to switch to the tab "Self-loading" and in the list of the context menu to select item "Write an image of a hard disk" .

Select the item "Write an image of a hard disk".

Select the item "Write an image of a hard disk".

2Choose our USB flash drive in the list Disk Drive. .

Choose a USB flash drive in the Disk Drive list

Choose a USB flash drive in the Disk Drive list

3Record Method USB HDD +. . We celebrate the checkbox "Check" . More Other settings do not touch - click "Write" .

Click "Write"

Click "Write"

The process, on average, lasts about 10 minutes. The flash drive must be formatted, so it is also necessary to transfer files somewhere in the reliable storage.

At the end of the record, we see the corresponding message in the program window. The program can be closed.

Completion of recording

Completion of recording

Before installation, you can check if everything was done correctly.

Open the conductor. Next flash drive. And double click start the file setup.exe. .

Run the setup.exe file

Run the setup.exe file. Nothing terrible will not happen! If the Windows installation window is started - perfectly, reboot the computer and proceed to the installation. Clamping ↑

Preparation for installation windows 7

Now proceed to the most interesting.

The flash drive with the image must already be installed in the USB connector.

Reboot your computer or turn it on.

We need to boot from the flash drive: there are two ways - in the BIOS put the priority of loading and through Boot Menu. .

We will analyze each of them. For the table of contents.

Loading priority in bios

When rebooting, you need to press the key or key combination:

  • Delete.
  • F1 , F2. , F3. , F10 , F11 , F12.
  • Ctrl +Schift. +S
  • Ctrl +Alt. +S
  • Ctrl +Alt. +ESC
  • Ctrl +Alt. +Del.
  • ESC

Depending on the manufacturer of the motherboard, the key may differ.

You can find out in more detail on the website of the manufacturer's board of a specific model, or at the time of checking POST, when a message appears on the screen with the motherboard logo for a few seconds. "PRESS DEL TO RUN SETUP" .

This window will be loaded. The BIOS interface can also differ significantly from the example.

In more modern BIOS computers models (only now it is already a UEFI,) is characterized by a graphical interface and the ability to switch the menu to Russian.

Here we switch to the section Boot. or Advancet Bios Features. .

You can move here only by arrows on the keyboard (with the exception of modern bios firmware, where you can use the mouse).

We need a section Hard Disk Boot Priority - Switch it to position Press Enter. . The next step will be a flash drive in the section First Boot Device. .

Hard Disk Boot Priority - Switch it to Press Enter

Hard Disk Boot Priority - Switch it to Press Enter

We save the changes in the key F10 and leave the menu - ESC . on the table of contents ↑

You can boot from the flash drive and without changing the BIOS settings. And setting the priority of downloads.

You can do it through Boot Menu. .

When rebooting you need to use keys F9. , F12. , ESC , F8. , F11 (Depends on the BIOS version).

If this window appears (it may differ slightly), choose the arrows on the keyboard our USB flash drive from the list of loading media and click ENTER .

Boot Menu.

Boot Menu Category Office ↑

Installation WINDOVS 7.

If everything is done correctly, as described in the previous paragraphs, then when the inscription appears "Press Any Key to Boot From USB" Click on any key and waiting for the installation of Windows 7 will begin.

Press Any Key To Boot From USB

Press Any Key To Boot From USB

Installation WINDOVS 7.

Installation WINDOVS 7.

1In the first window, select the language and keyboard layout (the default is Russian). Click "Further" .

2Click the button "Install" .

Click "Install"

Click "Install"

Below there is a button "Restoration" With it, you can restore the damaged boot sector (for more experienced users).

And help - clicking on the button "What should be known before installing" , you can read detailed tips and instructions when installing .

3Agree with the terms of the license agreement and click "Further" . We will not be able to read the agreement itself.

• We agree with the terms of the license agreement and click "Next"

• We agree with the terms of the license agreement and click "Next"

4Now the most important thing in the next window switches to the item "Selective installation for experienced users" .

Switch to the "Sample Installation for Experienced Users" item.

Switch to the "Sample Installation for Experienced Users" item.

You should not be afraid of the inscription about experienced users, this is just a clean installation option with full formatting of the system partition or all the hard disk before installation. But we have already saved all the documents and safely can format the system disk.

First option "Update" represents the installation of the system on top of the old when the old system will be packed in the folder Windows.old. This will take a lot of space and the inexperienced user delete it will be problematic without re-installation.

You can read more detailed information here in this window by clicking on the button. "Help in decision making" .

1When the system is installed on a new computer, you need to create a logical partition, one or more (if necessary). Click on the button "Disc Setup" .

Click on the "Disk Settings" button.

Click on the "Disk Settings" button.

2Next click "Create" .

How to install Windows 7 from a flash drive: Tips, step-by-step instructions

Click "Create"

3Write the size of the future system disk and choose "Apply" .

Write the size of the future system disk and choose "Apply"

Write the size of the future system disk and choose "Apply"

How to install Windows 7 from a flash drive: Tips, step-by-step instructions

Additional sections will be automatically created, except for the main one, are reserved sections for recovery.

Click "Further" .

When reinstalling the system, you only need to highlight the section with the system and format it.

Other sections, logical disks and reserved sections can not be touched. Otherwise, save information on logical disks will not work.

To fully format the entire hard disk, delete all partitions, format the disc fully and create the sections again.

Then we will see a familiar, for many experienced users, the installation interface of Windows 7, which first appeared in Vista and up to the "dozens" did not change.

Continuation of installation

Continuation of installation

Now we need to be patient, the process can last from 20 minutes or more.

True, on modern SSD discs, the installation is at times faster - about 5 minutes.

At the end of the installation, the computer will reboot several times. It is advisable to remove the flash drive when you first restart, so that the installation does not start again if the loading priority in the bios was initially changed.

How to install Windows 7 from a flash drive: Tips, step-by-step instructionsTo the contents ↑

Custom settings

The windows window will appear 7.

1In this window, we need to ask the name to our PC.

Specify the name for PC

Specify the name for PC

2If necessary, you can immediately set a password to log in, as well as a password tip. This is an optional step, you can skip it, just leave the fields empty and click "Further" .

Click "Next"

Click "Next"

3The following window of the product key input will appear (it can be found on a licensed disk box).

How to install Windows 7 from a flash drive: Tips, step-by-step instructions

Remove the label from the item "Automatically activate Windows when connecting to the Internet". Important: If this label does not remove, log in to the system will not work without a key.

Select security settings.

When using the recommended parameters, all necessary security updates and updates that are not related to security will be downloaded and installed (only if there is internet).

How to install Windows 7 from a flash drive: Tips, step-by-step instructions

The second item is the installation of only important updates.

Third point "Delay the decision" - No updates will be downloaded, but they can then be installed on their own.

The next step, set the time zone, time and date.

How to install Windows 7 from a flash drive: Tips, step-by-step instructions

Select the type of network. If you have the Internet, the corresponding parameters of the selected network type will be applied.

How to install Windows 7 from a flash drive: Tips, step-by-step instructions

The desktop will be loaded further. And you can install programs, drivers and utilities. Clamping ↑

Possible problems

Sometimes users encounter drives of drivers. After installation, it is possible, for example, to detect that there is no sound.

Or not network access - this means that the network driver is not installed. To protect yourself from such unexpected troubles, you can prepare a collection of all the necessary drivers and utilities in advance, after installing which the computer will work without problems.

Such a tool is the program DriverPack Offline Full .

It needs to be downloaded to a separate USB flash drive and run in the system where the necessary drivers are missing.

The program itself will determine missing drivers and utilities and install them.

There is only one drawback - the program is quite voluminous. At the time of writing this article, the driver Pak weighed more than 16 GB.

But you should be careful - it sets different additional programs and applications.

The inexperienced user is easy to skip this moment, then you will have to clean the system from unnecessary antivirus programs and other unnecessary software. Clamping ↑

conclusions

Windows 7 can already be called an outdated system. Without a doubt, she, and after 9 years, is still considered the best, although the "dozen" catch up with its seven-mile steps.

Extended support, according to Microsoft developers, for the "seven" will be completely discontinued in 2020.

After complete cessation of support for security updates, you can no longer wait.

Therefore, think about purchasing a new version of Windows.

Buyer assessments: 5 (8Votes)

Do you have a laptop, personal computer or tablet - in one word the device you want to install Windows via a USB flash drive? You often have to reinstall OS and you do not want to use fragile and bulky discs?

If so, then this guide for you. Carefully read the instructions outlined below, and you will definitely work out!

How to reinstall Windows from a flash drive through bios

How to reinstall Windows from a flash drive through bios

Part 1. Preparing ISO File

It is also possible to say that the disk image is the same CD / DVD, which does not have its own material shell.

Step 1. If you are the owner of the official copy of Windows, you can create a boot USB drive from the Windows installation program that is supplied to the DVD disk or use the official ISO file that can be downloaded from the company's website. You can also purchase an ISO distribution and from other sources (download from any torrent tracker). In the last two cases, skip the subsequent items of this section.

If you are the owner of the official copy of Windows, you can create a boot USB drive from the Windows installation program

If you are the owner of the official copy of Windows, you can create a boot USB drive from the Windows installation program

Step 2. Installing a disk image recording program. Many free solutions are available on the Internet, one of which is the ImgBurn program - one of the most popular utilities.

Install the disk image recording program

Install the disk image recording program

Step 3. Insert the disc with the operating system into the DVD drive. Open the program and click on the "Copy to Image" or "Create Image" tab (in different versions of the program, the inscription may differ). When the query appears, select DVD drive as a source.

Insert a disk with the operating system into the DVD drive

Insert a disk with the operating system into the DVD drive

Step 4. Save the ISO file. Choose easily memorable name and location of the file. Make sure you have enough free space to save the file. The ISO file is, in fact, an exact copy of the loading DVD.

Save the ISO file

Save the ISO file

Part 2. Creating a boot USB flash drive

Step 1. Insert your USB flash drive into the appropriate computer connector. To successfully copy the disk image file (ISO), the carrier size must be at least 4 GB.

Note! When creating an installation flash drive, all source data will be erased - back up if you have important information.

Insert a USB flash drive to the appropriate connector of the computer

Insert a USB flash drive to the appropriate connector of the computer

Step 2. Download Windows 7 USB / DVD Download Tool from the official website of Windows. Despite the name, the utility works with other versions of the OS.

Upload Windows 7 USB / DVD Download Tool

Upload Windows 7 USB / DVD Download Tool

Step 3. Specify the path to the ISO file - the location in which you saved it at the last stage of creation.

Specify the path to the ISO file

Specify the path to the ISO file

Step 4. Click on the "USB Device" button. The program can also create a boot disk, for this press the "DISC" button.

Click on the "USB Device" button

Click on the "USB Device" button

Step 5. Wait for the download to complete. The program will prepare a drive, then downloads an ISO file on it. Depending on the speed of your device, the copy process takes up to 15 minutes.

Loading the download

Loading the download

Part 3. System preparation

  1. Insert the USB drive into the computer. Click on the power button or restart the computer. During the reboot, press on the so-called, "setup key" - a key combination that is shown on the first system loading screens. Usually, this combination is on the same screen on which the logo manufacturer is displayed. The key varies from the computer to the computer, but in any case it will be on the screen. After clicking, you will go to the BIOS menu. Go to the BIOS menu

    Go to the BIOS menu

    Table of dependence of hot keys from the PC model at the start of the download

    Combinations of hot keys

    Combinations of hot keys

  2. Click on the Boot Menu tab. Each BIOS is different, but they all have this tab. You will see an order in which the computer is looking for a boot operating system. As a rule, computers first do it from a hard disk, so the OS is loaded automatically. Click on the Boot Menu tab

    Click on the Boot Menu tab

  3. As soon as you go to "Boot Menu", you will need to switch order so that your USB drive is at the very top of the list. Again, how specifically this list looks like, will vary depending on the brand and model of the device. You may see the name of your drive, and perhaps it is about the inscription "Removable Device" or "USB". To change the order, use the "+" and "-" keys - up and bottom accordingly. Put a USB drive to the very top of the list

    Put a USB drive to the very top of the list

  4. After, save the changes and exit BIOS. The key to this action is usually the F10 key. The computer will overload from the USB drive. We save changes and leave BIOS

    We save changes and leave BIOS

Part 4. Installing Windows

Step 1. To start initializing the installer, press any key. In the event that you do not do anything, the computer will automatically start downloading the already installed operating system and you will have to reboot the system again.

Click on any key

Click on any key

Step 2. After pressing the key, the system will start loading data to install the operating system. On slow devices, this process can take up to several minutes.

Download data to install the operating system

Download data to install the operating system

Step 3. Follow the installer's instructions. As soon as the installation is over, the system will reboot.

Follow the instructions of the installer

Follow the instructions of the installer

Congratulations! You installed Windows! Now you have a flash drive from which you can install the OS. Most new computers support installation with flash drives, use a special BIOS boot point, as shown above.

Video - How to reinstall Windows from a flash drive through bios

Did you like the article? Save not to lose!

I will tell step by step how to install Windows 10 using a flash drive to a landline computer or laptop.

Installing Windows 10 can be conducted as a new computer, on which there is no longer any system and on computers on which another operating system or the same Windows 10 stands, but it is required to reinstall it.

Save important files before installing. In my practice, they called me and reported me and reported that they were reinstalled, but wedding photos or working files remained on the computer and now they need to restore them (and this is a long enough and expensive procedure) Do not forget to keep the licensed keys from antiviruses, office programs, and Ave. If you use the license software.

Preparation of flash drive

Before installing Windows 10, you must prepare a USB flash drive:

  • The minimum amount of memory is 8 GB.
  • Save important data from the flash drive to another place. For example, in a cloud, as I wrote above. While recording the image to your flash drive, all the data on it is deleted.
  • The flash drive itself is better formatted before recording.

Download a disk file to write on a flash drive

Microsoft.com/ru-Ru/Software-Download/Windows10 - Follow the link and download the installation tool, as I showed on the screenshot below:

Download Utility Media Creation Tool to install Windows 10
This is the official site of Microsoft, no viruses do not pick up

Record disk image with Windows 10 per USB flash drive

We run the downloaded program, after inserting a flash drive into a computer. We accept the License Agreement of the Program:

Record disk image with Windows 10 per USB flash drive. We accept a license agreement
The text of the license states that you should not violate Microsoft rights: use the software in any illegal manner that they are not required to provide technical support, periodically update Windows. Still tell about your rights and methods of interaction with you.

Next, select: "Create an installation media".

Write the disk image from Windows 10 to the USB flash drive - click "Create an installation media"

We put a tick: "Use recommended parameters". The system itself will choose the meanings that fit your computer. Do not change these parameters

Record the disk image from Windows 10 to the USB flash drive - select the basic parameters for installation. We put a tick: "Use recommended parameters"

Choose a flash drive. If we want to record Windows 10 to install.

Record the disk image from Windows 10 on the USB flash drive - select the media: "USB flash memory device"

Previously, the installation was carried out from the rewritable disk, but gradually everyone began to go to flash drives, it became more convenient: now there are fewer devices on which there are drives in general, especially if we talk about modern laptops, and even if the disk is scratched, then they can There are problems when installing.

But the recording on the disk has its advantages, the flash drive is often needed for everyday needs, and reinstall Windows is still possible, it will be necessary not once if it is suitable for it, insert a clean drive into the drive and select another item.

Setting up the parameters in the BIOS before installing Windows 10

Entrance to BIOS.

As soon as the computer is turned on, you have a couple of seconds to have time to consider which buttons on your computer are designed to call BIOS. This window does not have to look like me in the screenshot, on different computers differently, but usually it is indicated by which buttons for calling what functions answer. We need: "BIOS SETUP"

BIOS call when you turn on the computer
You need to see which button is responsible for the BIOS call. In the screenshot, for example, this is the "Del" button, which is located at the bottom of the numeric keypad, on the right.

If you still did not have time, then it should be one of the buttons: "Del", F2, F12. Try to press one of them, one of the window options should be opened:

1. Self common BIOS on modern devices

BIOS, which is commonly used on some modern types of motherboards

Multiple options are not a fact that it will look like that, we most importantly find the word "boot", and either the arrows on the keyboard, and if it will be written (F8) about this word (F8), the "F8" button select "BOOT".

The example shows the BIOS for the motherboard from ASUS

Old bios.

If you have something like that, then first go to the item: "Advanced Bios Features", then in "First Boot Device"

Such a BIOS is usually used on older computers.

UEFI Setup (Boot Menu)

Further, regardless of what you have a BIOS, the principle is the same: if we install Windows C flash drives, then on the first place in the list we need to choose our USB device. You need to click on the first place using ENTER and choose our media. If the disk, then the same, only put the CD / DVD device.

Remember, before starting the settings, as it was, and it is better to make a picture to the phone, after the installation procedure is completed, you will need to return everything as it was, we will return to this in the instructions.

Saving settings and restarting the computer. Preparation for installation

After all the settings, we definitely store all changes with the F10 button, click OK. After that, your device will restart and the window should appear on the screen that it is prepared for installation of Windows 10:

On my screenshot it is shown in English, but you most likely will be in Russian and will spin the loading wheel

A setup window must open: click "Set".

Installing Windows 10 - Installation Window.

By default, everything is already shown with Russian settings, if not, choose the desired language and the country, click on the "Next" button.

Installing Windows 10 Country and Language Selection Window

Activation of Windows 10 when installing

Outputs window with Windows 10 license activation:

Activation of Windows 10 when installing the operating system
  • If you already have a purchased key, then we simply enter it and click on the Next button.
  • If you bought a device already with a license and reinstall the system again, you can simply click "I do not have a product key" - later, after connecting the computer to the Internet, it must automatically be activated.

I will not write about the illegal activation methods of Windows 10, because a large number of activators contain viruses when downloading and the goal of most of them: simply infect your computer in order for the attackers to work on it. Methods Many: hidden mining cryptocurrency, showing his advertising, which is masked under the official in the browser, but the leading often on fraudulent sites. I could find a suitable activator, but would not be sure that he was not one of those infected.

Instead, I will describe all legal ways to activate it, so that you have a clean and fully working version of the operating system, which comes from Microsoft, with which no problems will arise. Still, the purpose of this article was just such.

Moreover, now there is an opportunity to buy This and official key from Microsoft. at a penny cost if you get the key itself, Only in electronic format . When you do not take a package of documents, a box and a license sticker. Such a key, for example, I have everything 490 rubles . To buy, you can write me in Vkontakte: https://vk.com/a_rbkn

A review of those who bought and who I helped with the installation can be found here in our group of VKontakte: https://vk.com/techmindru - Opening comments under the goods.

Or in whats app at number: 8 (937) 391-21-41 or in Telegram: @Byrlex

And if you want to purchase a box version for activation, or an electronic key, but with full package of documents on hand, You can purchase here:

Here are immediately represented products according to one of the best prices.



Start of installation

Further, finally, we start directly to the procedure of installing Windows 10. The following window should be released:

Here you choose that Windows for which you have a license, usually it is either Windows 10 domestic, or Pro. Click "Next". This window should go out:

If you want, read the terms of the license agreement and click the "Accept" button. Next, the installation type selection window will be released:

Everything is simple: if you select "Update" - the system will be updated, the old operating system settings will remain the same, and all files from the computer are stored in the Windows.old folder. If you want to fully reinstall the system so that there is a new, clean system without all too much, choose the second point.

Selecting a disk section for installation

In this step, we need to decide which section of our hard disk or on what physical hard disk (if several of them) we want to install our operating system.

If you have several physical disks, it is better to choose a drive to install an SSD. These are hard drives that are much more productive and faster than their predecessors - HDD drives. Try to find out what disk is used with you.

An example is shown on this screenshot using one hard disk.

If you want to create multiple partitions within one hard disk, delete all sections of this disk. All: Basic, system, restoration. To do this, select the section, and then click the "Delete" button. You will have an unoccupied disk space:

If you have no more than one physical hard disk, such a window should appear

Allocate this unoccupied space, click on the "Create" button and click "Apply". The following will be released:

Choose a core disc, click the "Format" button, wait until formatting and click on the Next button. The installation procedure begins. It is usually installed all for 10-15 minutes

After that, you will automatically restart the computer, perhaps even a couple of times.

Finishing installation

On this, the installation stage can be considered completed, it remains to make the last settings:

If at the previous time you did not activate Windows, but click "Make later", repeat this action.

Choosing a region

Internet connection

A window must appear with a request to connect to the Internet, you can click No and go to the next step, and you can click "Yes" and immediately select WiFi connection if it is.

Setting account settings

  • If, as I spoke at the beginning of the article, you saved these Microsoft account data, then connecting to the Internet, just log in to your password or login.
  • If there is no Microsoft account, click on the "Create Account" button - and fill in the required fields.

Save this data, they are used to enter Windows and come out again.

Creating Microsoft Account when installing Windows 10
Create Microsoft account - these data will be subsequently used at the entrance.

Return of BIOS settings to its original condition

Remember, I wrote above, in the BOOT setup point in Bios about what you need to remember how everything was at the beginning? So, restart the computer after the first launch will be held, log in by the same instructions on the BIOS and go to the Boot menu, restore the old settings. It is necessary in order to then, when you have a flash drive into a computer or laptop, it has not been loaded the system from these devices or did not go to the installation again and the confusion did not occur at all.

First launch and installation of updates, drivers.

So the first launch took place, a clean system, without drivers. If you downloaded Windows 10 from the official site Microsoft, that I gave at the beginning of the instructions, you should already be updated.

Windows 10 desktop after installation
Windows 10 desktop after installation

Click on the "Windows (Start) button, go to" Parameters "," click "Update and Security", click there: "Check for updates" - if you are, install.

Windows 10 Settings - Update and Security.

Installation of drivers

At least after the update part of the updates, or maybe everything, installed, I, nevertheless, I recommend installing another DRIVERPACK Solution program - it will automatically select the desired drivers for all your devices, as if the chipset, video card or printer (only be sure to connect to this Printer or other device that you want to use to a computer or laptop and turn on)

In order to find and download this program simply enter this name in the search engine, it must come from among the first sites:

Search for Yandex official site DriverPack
Pay attention to the site address, it should be the same as in the screenshot

Go on the link, click on the "Install All Required Drivers" button

Download from the official developer site program for automatic recruitment drivers DriverPack
It is better to download this program from the developer's official website, so as not to "pick up" excess when downloading from other sites.

After downloading the installation program, open this file, the program will do everything itself - it will be installed, then automatically starts to select the desired drivers, you will be left to "install" everything and wait until everything is installed.

That's all. Further install the programs you need. I recommend to get acquainted with the article: Programs for Windows 10, which are recommended to put after installing or purchasing a computer for all.

Dear readers, this is my first article on my site, I went to her a few days of work, please rate in the comments, as far as it was informative for you and understandable, I will make adjustments to make it better for you. If any questions remained, write, I will definitely answer as quickly as possible.

Detailed video instructions

I just cook a video for insertion to the site

If you wanted to a video, and it is not yet on the site yet, I'm just doing it now and, in a short time I'll post it on the page.

Technologies do not stand still, and if yesterday we rejoiced a writing DVD drive in our computer, now in many laptops there are no these drives at all. All replaced flash drives. However, the probability of the operating system failure remains the same. How to reinstall the Windows system from a flash drive without using disks - in our article.

How to install windows on a computer from a flash drive

How to install windows on a computer from a flash drive

Preparation of bootable media

It all depends on what kind of operating system you want to install. For Windows 10 from Microsoft, you can download a fairly convenient special utility to create loading media. For the system of older generations, you will have to use third-party software, good, mass options. Consider the most universal and simple option using Ultraiso:

Step 1. Download Ultraiso from the official site and install on your computer.

Download Ultraiso from the official site

Download Ultraiso from the official site

Step 2. Now you need to download the disk image itself with Windows.

Download the image of Windows from the official site

Download the image of Windows from the official site

Note! For computers with more than 4 GB of RAM, it is recommended to choose an image with 64-bit bit. This is due to the fact that 32-bit systems do not know how to address more than 3.8 GB of RAM. And in general, it is now better to choose exactly x64 - in numbers it is floating point operations, in practice - compatibility with all modern programs and the overall increase in the performance and stability of the system.

Step 3. Open the downloaded image using the Ultraiso program. You can do it:

  1. Both using the "Explorer" context menu, and using the Open command located in the File menu of the program itself. In the Ultraiso menu, click "File", choose "Open"

    In the Ultraiso menu, click "File", choose "Open"

    Select the Windows disk image and click the Open button

    Select the Windows disk image and click the Open button

  2. Now in another menu, "Self-loading", you should select the item "Write an image of a hard disk". In the "Self-loading" menu, select the item "Write a hard disk image"

    In the "Self-loading" menu, select the item "Write a hard disk image"

  3. In the current console, select the target drive. It would be nice to format it before the start of the operation, it will minimize the likelihood of all sorts of errors when recording, however, in most cases, everything works fine without this action. Click the "Write" button. Click the "Record" button

    Click the "Record" button

  4. Patiently wait for the end of the recording process. After completing the operation, close the program. Now you can proceed to the most important - installation of the system.

Important! If you pull out a flash drive during surgery - almost certainly kill it.

Selecting a boot device

This part of the process is more difficult to describe - how many manufacturers of motherboards and laptops, so many standards. To enter the BIOS, you need to press and hold down the computer when you start the computer - whether F2, DEL or Esc. I will not go into details - I will just say that you can always find the necessary information in the manual instructions or on the manufacturer's website of your device.

So, you went to BIOS. Further:

  1. Find a tab that is responsible for downloading a computer. It should be called "boot" (or any configuration with this word). We go to the tab "BOOT"

    We go to the tab "BOOT"

  2. Next, you need to find a string priority for loading hard disks "Hard Disk Drives" and move our USB flash drive to the first place. We find a string of the priority of loading hard disks "Hard Disk Drives"

    We find a string of the priority of loading hard disks "Hard Disk Drives"

    Choose our USB flash drive, press ENTER, using the up arrow, move our USB flash drive to first place

    Choose our USB flash drive, press ENTER, using the up arrow, move our USB flash drive to first place

    Our flash drive in the first place

    Our flash drive in the first place

  3. Now we go to the overall priority of the download "Boot Device Priority". Here everything is clear - we again make our USB flash drive. We enter the overall priority of download "Boot Device Priority"

    We enter the overall priority of download "Boot Device Priority"

  4. Everything. You can save changes, and restart the computer. To do this, go to the last tab and select the appropriate item. The computer will start rebooted. Go to the "EXIT" tab, choose "EXIT & SAVE CHANGES", press "OK"

    Go to the "EXIT" tab, choose "EXIT & SAVE CHANGES", press "OK"

Note! In many bios, there is an option "Download menu" - this is a menu that displays all devices that can be used as bootable. Plus this method is that you actually do not change, the load priority and you do not have to return everything to the place after the installation of the system is completed. Minus one - this thing is not everyone.

Installing Windows System

  1. A computer load from an external device will begin. You will see the following message on the screen. System installation process with flash drive

    System installation process with flash drive

  2. Wait for the end of unpacking all files and running Windows installer. A welcome window of the installer will appear. Select the language of the installed system and click Next. We choose the language, click "Next"

    We choose the language, click "Next"

  3. Click "Set". Click "Set"

    Click "Set"

  4. The process of installing the system will start. After a little thought, the installation wizard will ask you what edition of the system and with what bit you want to deliver. Select the desired configuration and click "Next". Select the desired configuration and click "Next"

    Select the desired configuration and click "Next"

  5. The installer will prompt you to familiarize yourself with the license agreement. This is quite a big text, so just accept the conditions and go to the next step. We accept the terms of the license agreement and click "Next"

    We accept the terms of the license agreement and click "Next"

  6. Now you need to decide on the installation type. The update is not available for you now, this mode can be used only if you run the installation "from under system". Therefore, our choice is the second item "Selective: Only installing Windows (for experienced users)." Select the second item "Selective: only installing Windows (for experienced users)"

    Select the second item "Selective: only installing Windows (for experienced users)"

  7. The most interesting drives. In general, you can choose any partition and install the system on it, without even formatting, but at the same time get a lot of unnecessary files and as a result - a mustache in the file system and brakes when working. Therefore, it is extremely recommended to remove all partitions on the disk and redistribute it again, and then format the sections received. After creating and formatting a new system partition, click "Next". Select "Create", select the settings of the installation disk, click "Apply", then "Next"

    Select "Create", select the settings of the installation disk, click "Apply", then "Next"

  8. The installation process will begin. Wait for his end. Windows installation process

    Windows installation process

  9. During the installation process, the computer will reboot. This is normal. Installation screens will change. Restart system

    Restart system

  10. So, after the final reboot, the system setting itself will finally be completed, and you will see the primary setup window. If you have a product key, enter it into the required field, if not, then press "skip". If there is a product key, we enter it into the required field, if not, then click "Skip"

    If there is a product key, we enter it into the required field, if not, then click "Skip"

  11. Personalization. Select the color of the system. This is the color of the "Start" menu, as well as the taskbar and windows headers. Select the color of the system, click "Next"

    Select the color of the system, click "Next"

  12. On the "Parameters" page, select the "Use Standard Settings" button, as it will significantly simplify the installation and make your subsequent life easier - no wonder these settings, the developers are considered optimal. Select "Use Standard Parameters"

    Select "Use Standard Parameters"

  13. Now it remains to enter the username and click "Finish." Enter the username and click "Finish"

    Enter the username and click "Finish"

  14. The system will continue setting in automatic mode. Wait a bit, look at the welcoming screens with overflowing colors and get to the "desktop" of your new system. Desktop new Windows system

    Desktop new Windows system

Read the detailed instructions in the new article - "How to install Windows 10 from a flash drive."

Ready! It remains to configure the operation of the computer devices and deliver the necessary programs. You installed Windows system from a flash drive!

Video - how to install windows on a computer from a flash drive

Did you like the article? Save not to lose!

Microsoft with Windows 10 has almost completely eliminated the need to use service centers and various masters to install the operating system on a PC or laptop. Now the user in the presence of a flash drive in just a few minutes can create a loading USB flash drive, boot from under it from the BIOS and set the OS for ten minutes (depending on the type of drive). To do this, you do not need to be an experienced user or know some tricky teams - the whole process in step-by-step format is described below, you only need to do everything in guild. Moreover, at the end of the article there is a list of the most popular problems and options for their solutions.

How to create a bootable USB flash drive 10

  • You will need a flash drive on 8 GB or more. In the process of downloading Windows 10, all data from it will be erased.

Before installing the operating system, the user first needs to make the Windows 10 boot flash drive (or DVD disk using the RUFUS or ULTRA ISO and ISO image program). It is best to create a boot flash drive to use the official utility of Microsoft, which can be downloaded from the official site - the blue button "download tool now". How to install Windows 10 from USB flash drives: Step-by-step instructions and solving popular problems

After downloading the utility, you need to run and perform a few simple steps:

  1. We accept the terms of the User Agreement, after which they select the "Create installation carrier" item and click "Next". How to install Windows 10 from USB flash drives: Step-by-step instructions and solving popular problems
  2. At the Pre-Setup Stage, the program will automatically select the language and architecture. If you want to change them, remove the box opposite the "Use recommended parameters for this computer" item and select the desired parameters manually. How to install Windows 10 from USB flash drives: Step-by-step instructions and solving popular problems
  3. In the third step, the system will propose to establish Image on USB carrier Or create an ISO file. Insert a USB flash drive into a computer USB port or laptop, select the first item, after which you click on the flash drive on the flash drive to which you want to write OS. How to install Windows 10 from USB flash drives: Step-by-step instructions and solving popular problems
  4. Now you need to wait until the utility downloads all the necessary files from the Microsoft server and will form everything you need to install the operating system. How to install Windows 10 from USB flash drives: Step-by-step instructions and solving popular problems

Making changes to the BIOS so that the computer is loaded from the flash drive

Having a bootable flash drive on the hands, start up by installing Windows 10 so far, because you first need to do so that your PC understand that you need to download it from it, and not from another drive that is already in the system. To do this, make some changes to Boot Menu so that the system understand that the flash drive should be loaded first. You should not be afraid of this item, since there is really nothing complicated in it, and all the modern versions of the BIOS are a rather understandable interface with the recovery function of factory settings - even if you press something with a lacaround, it can be easily restored.

The process of changes in Boot Menu:

  1. Restart the computer and immediately after starting it, repeatedly press one of the following keys or combinations: PC - F1, F2, DEL; Laptop Acer - F1, F2, Ctrl + F2, Ctrl + Alt + Esc, Ctrl + Alt + Del; Laptop ASUS - F2, F9, DEL; Laptop Dell - F1, F2, F10, DEL, ESC, INSERT; Laptop HP - F1, F8, F10, F11, ESC, DEL; Laptop Lenovo - F2, Fn + F2, F8, DEL; Laptop Samsung - F2, F8, F12, DEL, FN + F2, Fn + F8, FN + F12; Laptop Sony - F1, F2, F3, Del, Assist.
  2. In the BIOS itself you need to open the menu Boot Menu. (It can be located on the first screen, or is displayed in a separate menu) and put the first-place USB flash drive with the UEFI prefix in the title, after which you save the changes and exit BIOS (Save and EXIT). Or, if your system supports it, you can simply select a USB flash drive, and the PC load will start with it. How to install Windows 10 from USB flash drives: Step-by-step instructions and solving popular problems

Installing Windows 10.

In the first installation window, the user is offered to select a language, the format of monetary units and the keyboard layout. If you select the Russian language when booting OS, you will automatically automatically be installed standard parameters and you do not need to change the layout, for example, you can change later. In addition, it is necessary to clarify that the size of the window, fonts and permission on your screen will not be quite familiar. It is normal - so far there are no drivers for the graphics processor on the PC, so that the universal format is used, it is not necessary to be afraid of it.

Windows 10 installation process:

  1. After a short loading, a large button will appear on the screen. Set By clicking on which, actually, the installation process of Windows 10 is begins.
  2. Immediately after that, a menu will appear on the screen with a proposal to activate Windows. If you have an activation key, you can enter it right here in a special field. If there is no key or you are now inconvenient to enter it, you can click on the bottom of the window " I do not have a product key "And activate the operating system later, after installation. How to install Windows 10 from USB flash drives: Step-by-step instructions and solving popular problems
  3. A window will appear on the screen with a selection of the operating system, which you want to install. If you have a purchased key specifically for some of the versions, it's worth it and choose, if the key you plan to buy after installation, you can choose Any of versions - Activation keys are sold, including the Pro version of the OS.
  4. After reading the terms of the User Agreement and clicking "Next", the user will see the installation type selection window - "Update" or "selective". In our case, it is worth choosing " Selective »To install the operating system, clean.
  5. Appears on the screen Menu of the drive of the drive to which you want to install the operating system. If you have one drive, and he is new, then you just choose it and click "Next." If the drives are somewhat - choose the one that you need (to determine the desired disk can be in the amount of free memory). If you want to make a clean Windows 10 installation, erased all data, select the desired drive and click on "format". How to install Windows 10 from USB flash drives: Step-by-step instructions and solving popular problems
  6. The process of direct installation of Windows 10 will begin. . During the installation, it is not necessary to press anything or do, we simply wait for the end.
  7. After the installation process is completed, the screen selection screen and the region appears on the user screen (the Russian language and Russia is initially installed), plus you will need to select the setting method (for personal use or organization - choose " For personal use ");
  8. The system will suggest log in from under Microsoft account, create a new account or run an autonomous account. If you have a Microsoft account, you can enter it if it is not - choose " Autonomous account ", In the next window in the lower left corner, click" Limited Opportunities ";
  9. We enter the username, then you specify a password for it and choose three control questions (they are needed in case you forget the password - not recommended them to neglect );
  10. The system will propose to select privacy parameters - speech recognition, geolocation, data diagnostics. You can turn off everything or leave, all these parameters can be configured after installing Windows 10;
  11. The system will execute the last settings, it may take a few minutes - Do not disconnect the computer at this point. ;
  12. Operating system Windows 10 installed .

Possible difficulties and errors when installing Windows 10

1. Before installing the boot image OS on the USB flash drive, it can be Format in FAT32. So that the process goes correctly.

2. In case you cannot find the downloads menu in the BIOS of your computer or laptop, you should open the manual to the motherboard or laptop, where this information is specified, or find data on the manufacturer's website by the model name, or enter the search engine " Motherboard Title / Laptop + Boot Menu "

3. During the selection of the drive, you can fly a mistake that Windows can only be used GPT disk . Eliminate this problem is extremely simple:

  • Press SHIFT + F10 (PC) or SHIFT + FN + F10 (laptop) on the keyboard;
  • In the command prompt window, write the DiskPart command;
  • After starting the disk utility, enter the LIST DISK command to display the list of disks;
  • From the received list of discs, select the number of the one that is required for installation (in this case - disk 0);
  • Write the SELECT DISK 0 command;
  • Write the Clean command to clean the disk (all data is lost on it);
  • Write the CONVERT GPT command;
  • At the command prompt, the message "The selected disk is successfully transformed to the GPT format" How to install Windows 10 from USB flash drives: Step-by-step instructions and solving popular problems
  • Enter the EXIT command and close the command line;
  • In the disk selection window, click on the Update button to update the parameters of the drives.
  • Now you can install the OS.

Materials on the topic:

Whatever advanced "ten" , sooner or later, and she begins to slow down treacherously. In this article, we describe how to reinstall Windows 10 on a laptop or PC with minimal difficulties. We promise: even inexperienced users will cope without problems.

1 What is better: reinstalling, system optimization or recovery?

Good news - advanced recovery mechanisms are built in Windows 10, which are not yet aware. And very in vain. Because Often you can do without a full reinstall - the system for several clicks can be returned to the state "as at the very beginning" (about it - just below).

And most importantly: before resorting to any radical methods, we strongly recommend trying in our instructions "How to speed up the computer on Windows 10". In it, we collected the most effective ways of optimization that will help to thoroughly clean and dispersed the system. Often this is enough - and reinstall Windows you will always have time!

2 OS recovery instead of reinstallation.

2.1 How to return the computer to the original state on Windows 10.

So, promised "Lifehak". Do not everyone know that instead of a long and painful reinstallation of Windows 10, you can quickly return the OS to the pristine clear state, dropping it to the factory settings.

It is like an ordinary reinstallation, only saves a bunch of time and nerves. At the same time, you can even choose whether to erase everything "submissive" or save personal files.

Although the installed software and the OS settings will still be removed. Therefore, it is best to prepare a list of programs that will need to be installed again after graduation.

Windows 10 refund is made It is very simple to the initial state.

  1. Through "Start" Go to B. "Parameters" .Log in-to-menu-parameters - Start
  2. From there - in the menu "Update and Security" .Tab Update and Baptism
  3. In the tab "Restoration" Zhmem. "Return the computer to the original state" .Return the computer to the original state
  4. In the next window, select whether or delete personal files. If you would like just "Refresh" OS, then you can save. If you delete everything, then after returning to the computer there is a nine clean Windows 10. Selection of actions when restoring windows
  5. Chose? We read about what will happen during the return process, and click "Reset" .

That's all! A few minutes later the system will return to its original state - as on the installation day. It may be very possible that nothing will have to reinstall. Try.

Because of some problems, the "dozen" refuses to load? You can still roll back to the original settings (in the process will be erased and errors that caused problems). How? After several unsuccessful attempts to start the OS throws you into the boot menu. In it, choose "Return the computer to the original state" and we do the steps described above.

2.2 How to return to the previous version of Windows 10.

After the next upgrade "Ten" began to work badly? Fortunately, it makes no sense to be melted with reinstalling Windows 10 from scratch - for some reason the OS, you can easily roll back to the previous assembly.

For this:

  1. Zhmem. "Start" .Log in-to-menu-parameters - Start
  2. Choose a shortcut " Parameters" .
  3. Later "Update and Security" .Tab Update and Baptism
  4. Go to B. "Restoration" .
  5. In point "Perform a rollback to an earlier assembly" Click "To begin" .Return to the previous version of Windows
  6. Explain why they decided to roll back WIN. 10 (we put a tick anywhere). Why roll back to the previous assembly of windows
  7. On offer Check updates answer "No thanks" .Checking updates when rollback system
  8. We study the information and click "Further" .Studying information when rollback WINDOVS SYSTEM
  9. Remember the password from the former assembly (if it was) and again "Further" .Password to enter windows during system rollback
  10. Zhmem. "Return to the previous Windows" .Confirmation of the transition operation to the previous version of Windows

Further we wait a little: the system will do everything else itself, it will reboot in the late a couple of times and - voila - you have an old assembly again.

3 How to reinstall Windows 10 from a flash drive.

Decided yet to completely demolish and rearrange OS on a laptop again ? Our step-by-step instructions for reinstalling Windows 10 from the flash drive will make this task as simple as possible.

  1. Because All information from the C disk will be erased, all important files are transferred to it in a safe place: to disk Dor flash drive. Do not forget to check "Desktop" , "My documents" , "Downloads" etc.
  2. Remember what size was the disk СAnd how much there is a free space on it - it will be useful when it is necessary to "recognize" it during the installation process.

3.1 Preparation of the boot flash drive.

Before, How to reinstall Windows 10 from a flash drive This installation USB must first create. How to do it easier?

  • Need a license? Then you can not reinvent the bike and use the Media Creation Tool - the official utility from Microsoft. She will do everything almost itself: And Win 10 downloads, and will write it on the USB flash drive. We only load the program itself, open it and follow the simple instructions on the screen.
  • The license is not particularly interested, but the cherished ISO image of the "dozens" did you somehow got somehow? Record it on the USB flash drive will help the command line or any of the free utilities - Ultraiso, WinsetUpfromusb, USB / DVD Download Tool, WinTobootic, RUFUS, etc.

In order not to repeat, we invite you to look into our article "How to create a bootable flash drive to reinstall Windows 10". There, we painted in detail 8 recording methods - and for a license, and for unofficial versions.

What version to choose - 32-bit or 64-bit ? Depends on the amount of RAM. If you have up to 4 GB - put 32-bit, if more - boldly take a 64-bit one.

3.2 Starting installation via Bios / Boot Menu.

To start reinstalling Windows 10, you need to set the download from the flash drive. Insert the drive into the USB port, reboot, and then there are 2 options.

one) Simplest - go to the boot menu ( Boot Menu. ) And the up-down keys choose the download from our USB flash drive. Here is a plate with buttons calling Boot Menu on different computers (click immediately after rebooting, as soon as the black screen appears).

Desktops

  • MSI (Motherboard) - AMI (BIOS) - F11
  • Gigabyte - Award - F12
  • Biostar - PHOENIX-AWARD - F9
  • ASUS - AMI - F8
  • Intel - Phoenix-Award - ESC
  • ASRock - AMI - F11
  • Chaintech - absent
  • ECS - AMI - F11
  • Foxconn - ESC
  • Gigabyte - F12.

Laptops

  • ASUS - ESC
  • Acer - F12.
  • ASUS AMI - ESC
  • ASUS PHOENIX-AWARD - F8
  • Dell - F12
  • Fujitsu - F12.
  • HP - ESC, then F9
  • Lenovo - F12.
  • MSI - F11
  • Samsung - ESC (Note - Click only 1 time during the appearance of the boot screen!)
  • Sony - F11
  • TOSHIBA - F12. Select flash drive through boot menu

2) Second way A little longer - instead of Boot Menu we enter the BIOS (keys to enter here - link) and on the list of download devices, we assign the first to our installation flash drive. For this:

  • In Bios go to the section "Boot" "Boot Priority" / "Boot Options" .Establish in Bios Boot Priority
  • We go to clause "1 - FIRST" / Zhmem. "ENTER" / Classes for "USB" / again "ENTER" .
  • We check that "HDD" / "Hard Drive" stood under some other lower number.
  • We save changes.

The exact names will have their own, but in general the line with "USB" should be higher than "HDD / HARD DRIVE" .

Made? Excellent, most often after loading, this is the inscription: Press-and-key-to-boot-from-CD-or-DVD

Press any key, and reinstalling Windows 10 officially started!

3.3 How to reinstall Windows 10: Select the version / bit.

We briefly painted this stage in steps.

Window №1 : Choose everything "Russian" (language, time format, layout). Select language when installing windows

Window №2. : Zhmem. "Install" .Set button when installing windows

Window number 3. : If there is an official key, I introduce it. If not, at the bottom honestly click on the blue inscription: "I do not have a product key" .Enter a istizon key when windows activation

Window №4 : (Window appears if 2 versions of Win 10 with a different architecture lie on the flash drive)

We indicate the one we are going to put.

Window No. 5. : Choose between home and pro versions (recommend "Home" ).

(This window does not always happen) Installing the discharge of windows 10

Window No. 6. : Read the license agreement, put a tick about the harmony, click "Further" .Licensing-Agreement-windows

Window №7 : Click on the second option " Selective: only installing Windows " Selective-only-Windows installation

3.4 We divide / format the hard disk.

At this step, we get into the menu where we have to choose a hard drive section to reinstall Windows 10. Do not worry if the disks are an order of magnitude more than you used to see: now we'll figure it out.

Remember how the disk sizes with you СBefore installation? So we can easily determine it: we find, choose, click "Format" (at this stage it will be completely cleaned), we allocate and click "Further" .

If you want (for example, on the "old" disk CThere is not enough space), you can break the hard drive in a new way. To do this, choose all current sections, click "Delete" and key "Create" We ask new ones. Then choose a disc for installation and click "Further" .

In terms of free space on Windows 10 disk rather voracious. For loyalty, focus on 20-25 GB for a 64-bit version and 16-20 GB for 32-bit. Microsoft modestly calls the minimum figures, but on live practice they "scatter" almost instantly.

Sometimes it is necessary to additionally put the second OS on the computer, not the touch current. How to reinstall Windows 10, while maintaining the old version? Nothing complicated: put a new one on the adjacent disk (for example, on D), and we get two autonomous systems. The entrance to the desired is selected each time.

  • Decided on the section and pressed "Further" ? Files are copied to it, and the computer will reboot.
  • At this stage, you quickly pull out a flash drive (if the installation window from the flash drive still has time to appear again, just close it, and the system will again restart, this time as it should)
  • Some time admire the black screen with the "Dozens" logo and the message "Preparations" while the system is preparing, configured, etc. Sometimes the computer will be rebooted itself, sometimes flickering or "hugging" - everything is fine, do not touch anything. As a rule, the entire process of reinstalling Windows 10 is delayed for 30-100 minutes.
  • Finally, the system will ask us to enter the key. At the bottom of the left can be pressed on a small inscription "Make later."
  • Then select whether to connect to Wi-Fi to connect (if you plan to immediately log in to the Microsoft account, connect if not, while you can choose "Skip this step" ).

3.5 Set the parameters and account.

Now we will configure the settings. If you do not want to mess now, just click "Use standard parameters" . All this can be changed and after you reinstall Windows 10, already during operation.

I do not extend to optimize the Windows system, read this in detail in our article "How to speed up the computer on Windows 10"

If you do not mind resolving the question immediately, then click "Setup" and do the following steps:

  1. We ask your region / "Yes" .Selection-region-in-windows-10
  2. I confirm the layout / "Yes" . I miss
  3. If you wish, choose additional layouts (it is not necessary to add English separately, it comes in a set by default). If you are enough for two, then click "Skip" .Confirm keyboard layout in windows 10
  4. Choose "For personal use" .Select Parameters for Personal Use
  5. We go to the Microsoft account, but better create a local one (see just below).
  6. We specify the PIN code for logging into the system - or behave without it. Installation of IDUs code in Windows
  7. Configure the cloudy storage of ONEDRIVE - or simply click "No".
  8. We study the proposed confidentiality settings and boldly turn off everything we do not like. Privacy Policy-WINDOVS-10

At the next stage, if the computer is connected to the Internet, the system will invite you to log in in Microsoft's account. But in order to avoid some potential glitches, we recommend doing this after the installation is completed. For now it is better to choose "Skip this step" (Little blue inscription below). Authorization-in-windows-10

We fall in the menu of creating a local account (if there is no Internet, then you will transfer you immediately, without the previous window). Authorization-in-windows-10

Here everything is simple: invent the login / twice enter the password / click "Next". If you do not want, you can not set the password - then Windows will not request it at the entrance. But it is better to put.

Approach the finish! At this stage, Windows 10 reinstallation is independently engaged in different subtle settings, sets all sorts of programs, etc. It remains only to see the encouraging screen "it may take a few minutes."

But do not rush to believe him for the word: if the computer is not very powerful, in practice, all this can delay the good half an hour. Do not touch anything, do not turn off, do not reboot - just do your affairs and wait.

When the system completes, you will see a new Windows 10 desktop.

3.6 Installing drivers and programs.

That's all, we have successfully reinstalled Windows 10. It remains only to install the necessary programs and drivers. In principle, if a laptop or PC is connected to the Internet, the "ten" itself picks up and puts the driver, but most often it does it not too high quality.

It is best to rearrange them manually - it is pretty fast.

  • On PC: We drive into the search for the official website of the manufacturer of the motherboard and download everything there.
  • On a laptop: We go to the official site of the manufacturer, in the "Support" column we find your model and driver for it.
  • Where to search drivers for a video card? Depending on the model, we go to the site AMD. , NVIDIA or Intel .

4 After reinstalling Windows 10, the computer does not start, what to do?

You did everything according to the instructions, but the system refuses to start? Without panic.

If you see a blue screen with inscriptions, familiarize yourself with our article "What to do If a blue Death screen appears (BSOD)?"

  1. In 90% of cases, the problem is in the conflict of the video adapter driver: try to boot in safe mode and delete the driver (to download the secure mode to the barbaric to turn off the computer with the button).
  2. Still check if the computer is connected to 2 monitors at the same time? If yes, then remove the 2nd, and the 1st turn off the discrete video card and reconnect to the built-in.

90% of the likelihood that after the first or second item is fulfilled, everything will work.

As you can see, reinstall Windows 10 was not so difficult

That's all the steps that you come up to you when reinstalling Windows 10 from the flash drive. There is nothing complicated in them: the eyes are afraid, and the hands do!

Tell us in the comments, did you get the first time? Was anything incomprehensible? Or maybe you have any "pitfalls" not described here? We will try to consider all your questions and supplement the article.

If earlier the operating system was installed with a DVD, now usually use a USB flash drive, and in modern computers, there is often no drive to read the disks. The installation process of the OS is almost no different, there is only a pair of subtleties. We'll figure it out how to install Windows 7 or 10 from the flash drives - which programs will help you quickly create an installation media and how to boot from the USB device.

Which flash drive need

Before installing Windows 10 to a computer from a flash drive, select the correct media. A USB flash drive is suitable or a MINISD and CompactFlash memory card inserted into the card reader. For Windows 7, you need a 4 GB device, for 10 version - 8 GB or more. If there are files on the drive, pre-copy them to a computer or other media - in the process of writing an OS image, the flash drive will be formatted, and all information will be destroyed on it.

Where to get the files OS

To install Windows C flash drives, an ISO image is needed to a computer. Better download it from the official Microsoft resource. You can download the * .iso file with Windows from other sites, just pay attention to the version of the OS. Often, third-party resources are postponed by author builds, which are additionally embedded additional applications, changed options. Such files can be facilitated to facilitate the subsequent system setting, so complicate, slowing down the computer by unnecessary functions.

Media creation programs

Before installing Windows 7 from a flash drive on a PC or laptop, you need to create an installation media with a special program as a special program. Simply copy the ISO file to the USB flash drive.

Media Creation Tool.

If you are going to install Windows 10, use the Official Media Creation Tool utility. Download it from the Microsoft resource, and in this case you will not need to look for and pre-load the installation image of the OS. To create an installation USB flash drive:

  • Run the utility;
  • Select, for which computer it is necessary to prepare the image - for the current or other;
  • Note the language, version and discharge of Windows;
  • Specify the type of media - USB.

Media Creation Tool Interface

The utility jumps the desired image and will prepare a flash drive to the installation.

Ultraiso.

The popular Ultraiso application has a test period that allows you to prepare a carrier for free. When installing the utilities, click on the "trial period". To record OS image:

  • In the "File" menu, go to "Open" and specify the directory where the downloaded * .iso with Windows is lying;
  • In the "Self-loading" paragraph, click "Write a Disk Image";
  • In the window, select a flash drive and click "Format";
  • When USB is formatted, click "Write";
  • The image transfer will take about 10 minutes.

Creating a media in Ultraiso

UnetBootin.

Universal UNTBootin Installer - a free application that does not require installation. In addition to Windows images, Mac OS and Linux can record. How to prepare a media with UnetBootin:

  • Run the utility, mark the "Disk Image" checkbox;
  • Click on the button with 3 points, specify the path to the ISO file;
  • On the bottom in the drop-down list, select the desired USB device;
  • Confirm rewriting data.

Rufus.

Compact utility, which also does not require installation. After starting, select the USB device in the list and click on the button with the disk icon to specify the placement of the installation file. Then click "Start", the OS data is copied to the flash drive.

How to boot from usb

To start the installation of Windows left to prescribe the download from the flash drive to the BIOS. Pre-copy the desired files from the system disk (usually C), from the desktop, from the folders "Documents", "Images", etc. In the process of deploying, the OS will all be removed.

To install Windows 7 from the flash drive, you need to select through the BIOS priority boot option from USB. It is easier to use Boot Menu - it is called during a reboot with the F11, F12 or ESC key, depending on the computer model. In the menu that appears on the first place, put a USB carrier. This option does not make changes to the BIOS and will affect only this download, the following will go from the hard disk again.

Select flash drive in Boot Menu

If Boot Menu does not start, the BIOS setting will help to install Windows. To get into the BIOS, during the reboot, press several times Del or F2. How to set up bios:

  • In the window, go to the arrows into the tab "BOOT";
  • go to subparagraph "Device Priority";
  • Place the USB first place;
  • Save the parameters and exit.

Setting up loading from flash drive in bios

After saving the BIOS configuration will be valid until the next change. Therefore, after the installation is completed, do not forget to set back the start from the hard disk.

Installation process OS.

How to run the WINDOVS installation process: if the download settings are set correctly, you only need to restart the PC. The system will start turning automatically:

  • You will be offered to select language and time parameters;
  • To activate, enter the key or skip the step to activate the OS later;
  • In the installation type, mark the update or full of files with the deletion of files;
  • Specify the partition of the hard disk in which the system will be installed. If the disk consists of 1 partition, you can immediately divide it by allocation of part under the OS;
  • Run the formatting of the selected partition, after which the files and installation of the components will start;
  • At the end, the computer will reboot - pull out the flash drive so that the OS reuse does not go;
  • Create an account to log in and other parameters.

Conclusion

We figured out how to install on Windows PC using a USB flash drive. Do not forget to copy your files in advance from the old system, then take the image of the OS using a special program to media. Include a priority device to the BIOS to start and reboot, then it will be left to set only a number of Windows parameters.

Добавить комментарий