How to make bows of satin ribbons. 50 impressive bows from ribbons do it yourself for any occasion

How to make bows of satin ribbons

Bow on hands from satin ribbon

Satin ribbons are the most favorite and affordable material. And we offer to start with them. If you are a novice in this matter, first you should learn to tie a beautiful bow from the finished ribbon on your hands. Make it quite easy.

This is a very simple tying technique. And we will help you: carefully follow this step-by-step video. A little time, attention, and you will definitely work out!

How to starch the satin ribbon?

To close the satin ribbon, you will need starch and water.

The proportions are: for one art. Spoon Starch Take one glass of water. First, dissolve starch about a third of a cup of cold water. Put the remaining water to bask on the stove. As soon as it boils, a very thin ridge pour dissolved starch into it. Constantly stirring, cook for about 5 minutes.

Remove from the fire, cool slightly and put in a mixture with a tape. Keep 20 minutes. Then squeeze, dry and join the paper.

Now you can make a bow of a ribbon, it will be less frighed and keep a good shape!

Beautifully tying a small bow on the fingers

If you do not know how to tie a bow from the tape on your fingers, these photos will help you with this. There is nothing complicated here too. Of course, you first stand a little stretch, but then you will do it with ease.

On the fingers a mini bow

This cute little bow can be decorated with hairstyles, clothes or handbags. In addition, this is the fastest way to beautifully tie a bow from the satin ribbon. On our pictures you can see more and more detail.

Double mini banta tying scheme on fork

Charming small bowls from satin ribbons can be tied in a very unusual way - with the help of the real table appliance - forks! Do not be surprised. These baby bows will decorate a funny postcard, hairstyle or clothes of pupae, rubberry or hairpin for little girls.

The master class in their manufacture is presented on our photos.

Double mini bug on fork photo MK

A very tiny bow can be tied even on a comb!

Classic School Booth from Kapron Tape

The classic will always be in fashion. It is appropriate anyway. The same applies to wide bows, especially school. What kind of hairstyle is associated with the holiday of first-graders on September 1, the last call or graduation? Right! With white big bows on your head!

We suggest you do just such. It is very elegant and volumetric. Perfectly decorate tails and pigtails. About how to make it stages, read below in our material.

White bows balls

Before proceeding with work, prepare not too short segment of the kapron tape. The optimal length is about one meter. And the width should be at least ten centimeters.

  1. To begin with, our ribbon you need to take, bend it very carefully in half. And then free edges be sure to be made by pins.
  2. The edges that are on the sides, you need to fall as a match or lighter. Do it quickly, so as not to burn all the product. Then scroll these edges too with each other.
  3. To this edge, where you sewed two ends, see any hair band chosen.
  4. Now keep sturdy threads along the fold line.
  5. Remove the pins and accurately roll up and pull the tape.
  6. Manually form a magnificent bow and once again squeak it with a needle with a thread.

Interestingly, the classic method of tie a bowl is called more French. And therefore, dear readers, do not look for a French bow, this is our, familiar and beloved - classic!

How to make bows from satin ribbon: step-by-step instructions

Satin ribbons are the most popular material for creating small masterpieces. Smooth, brilliant, relatively inexpensive ribbons always attracted the attention of needlewomen from around the world. The material was used in various fields of creativity, not the exception of steel and decorations based on various types of bows.

You can use ribbons of different widths to create accessories, but it all depends on the selected design and technology of execution. Let's start with the easiest species.

The easiest classic bow

A basic bow, which must learn to make any beginner, is presented below. For him, you can take both a narrow and very wide ribbon - it will turn out of any.

Work process:

  1. Fold the tape by throwing the two halves to the index fingers of both hands.
  2. Cross the half and shake one to another.
  3. Tighten the product. Ready!

On the basis of such a bow, you can make a chic decoration. It will only be enough to pour it with waterproof glue or brilliant acrylic varnish, then attach the rings to which the chain will be fastened.

The same bow will not be difficult to tie on the fork, with its help it will turn out to be more neat and even (although on the fingers you can create a very beautiful accessory). Also, for such an "helper" there is a limit - it will be useful only when creating very small bows, for larger products will have to resort to the traditional method.

Double ribbon

A double bow is performed somewhat different from the previous way. For him, two ribbons come in handy and a separately created middle, resulting in seating of edges.

Two rings fold in the middle and sew or glue so that they come into contact with the side parts. After that, the middle is closed in advance made part. The design can be attached to the hairpin or rubber band.

Note! For this accessory, it is necessary to take a middle or wide ribbon, from a thin, narrow material of such beauty will not be released. If your choice goes on a width of 2.5-5 cm, it will be an ideal solution.

The variation of such a bow of two tapes can be such analogue: in this case, two rings are superimposed by the middle of each other. You can also experiment with the color scheme - for example, create a red or green bow or even combine one or more shades in one product.

Tip! Try to make more two layers, take ribbons of different widths and textures. Thus, from one scheme for creating a bow, you can create a variety of aged accessories.

Multilayer magnificent bow

Excellent option for schoolgirls and not only. Such a bow is easy to put on a hairpin or comb to attach to the hair. Based on two simple bows discussed earlier.

To make such a thing, you will need to make the basis of two layers superimposed on each other. Of the tapes folded in this way, the rear part will turn out. The front is similar to the easiest first bow. At the end, they must be connected with glue or thread. All together is fastened with a central piece.

Thus, you can receive more volumetric accessories as the white bow below. Here is one difference - there are no two layers at the base, but three.

Romantic and exquisite, such an addition to the image will please any graduate, which will want to give nostalgia. But this option, unlike decorations for girls, more adult and feminine, namely, it is necessary in such cases.

Twisted bow of 3-4 ribbons

Very beautiful bow, which is well suitable for decorating on the head. For this, three or four (or even more) a piece of ribbon of one width, but different lengths need to be sewed with infinity and put one in another. Main issue as a few MK earlier.

Perfect lush bow in 15 minutes

Perfect magnificent bow

Master Class

Cut off the four pieces of atlas: the two largest - the same length, one more - smaller and one more very short (we use it as a jumper).

We sew or glue with each other short sides first with one long, and then one middle strip. It turns out two rings as in the photo below:

We put them in half the seams down, put one more small detail. Stitch or glue in the center.

Slightly suggest a bow in the center:

The remaining short piece we bring to the long sides inside until the middle, like this:

Gently turning the jumper bow with the bottom of the second long strip inserted:

Stitch or glue the jumper.

So that the bow watched is neat, cut off the bottom of the "tails" of the painter. In the case of a satin ribbon, you can carefully treat sections with a lighter.

Bow ready! If you wish to make it even more lush, make three or even four rings, most importantly - so that every next thing is slightly less than the previous one;)

Elegant bow

Sometimes instead of pomp and glossy low-rise satin ribbons, modest elegance is required. Bows from the reps ribbons look seriously, with a claim to solidity. Small accessories from the reps tapes are decorated with business suits, hats, bags, and imperative hair. Reply tapes are denser in structure, can take and hold the form, have a matte, corrugated surface.

Step-by-step master class:

  1. Prepare two small cuts of rep and ribbon of any color. Cut length depends on the size of the future bow.
  2. Shape the ring from each tape and put them on each other.
  3. On the rings lying on top of another crosswise, put the third piece in a horizontal position.
  4. At the middle of the glue drop and flash all three ribbons.
  5. Prepare two more cuts of tape. One small size for wrapping the workpiece in the center, the second is slightly longer than the rings, the edges to be treated in the form of a check mark.
  6. Little piece wrap the bow in the middle, and fix glue.
  7. Long cut in the treated edges to sew the back.

A piece of ribbon with gear edges turns a simple bow into the original accessory, giving it volume and completion. The edges decorated with cloths or oblique line make the craft ready.

Elegant classic

Simple, but a beautiful bow can be made literally in a couple of minutes. It is based on the classic method of manufacturing bows. To work, you will need a tape, a thread for sewing or hot glue.

A simple master class includes the following steps:

  1. Take a small cut ribbon of any color.
  2. Alternately, on both ends, throw the tape on the index finger, forming a loop.
  3. One loop to push to another and tighten.
  4. Bow ready.

Atlasal tapes facial and auto side are distinguished. When creating loops, you need to make the front side be outside. It has a glossy effect, a calm brilliance, the annoying side is faded, dim.

Dior

  1. You can roll such a bow, without using the auxiliary instruments. To fix the resulting design, we need glue for textiles. After working, its surplus is carefully cleaned with a napkin.
  2. Fold in half the segment of the fabric.
  3. Apply glue at the place of the joint, smooth out irregularities.
  4. Wrap the place of connection of the tape contrasting color, fixing the ends from the back

The finished product can be used for a gift or as a costume decor. If you attach a metal ring, an elegant accessory will easily turn into an original key chain.

(+115 photos) Bows from satin ribbons with their own hands

Polka Dot Bows for School

Materials:

  • 2,5 cm tape width, white and peas color,
  • 2 cm lace width,
  • Middle.

We will make a simple bow of the ribbon in polka dot and lace. Such a bow can even make a novice master. We apply a segment of a white ribbon 3 pcs. 22 cm, in peas 3 pcs. 24 cm. We will connect all the segments.

(+115 photos) Bows from satin ribbons with their own hands

(+115 photos) Bows from satin ribbons with their own hands

(+115 photos) Bows from satin ribbons with their own hands

  • On one white leave and sew the lace. From the rest, we will make bows: from white - double, from ribbons in polka dot - triple.

(+115 photos) Bows from satin ribbons with their own hands

(+115 photos) Bows from satin ribbons with their own hands

(+115 photos) Bows from satin ribbons with their own hands

  • We assign bows to each other. First in polka dots, on it white, top with lace. We sew all layers. Freeding a middle and a rubber band on a felt patch with a diameter of 2-2.5 cm. I got not only school bows, but also a tie.

(+115 photos) Bows from satin ribbons with their own hands

(+115 photos) Bows from satin ribbons with their own hands

(+115 photos) Bows from satin ribbons with their own hands

Minnie Mouse style

The child will be delighted with such a gift. For work, the sharpened scissors, a needle and threads are needed. Sew the accessory on the machine will be faster than manually.

How to make a giant "Spring"

This cracker can be created as one-color and in two colors. You can attach it to the hairpin, rim, bracelet, etc. You can also make it from the St. George ribbon by May 9th. It will come out simply!

(+115 photos) Bows from satin ribbons with their own hands

What you need:

  • Silk tapes of pink and olive shade 2.5 cm wide;
  • a small piece of a brick tape with a width of 0.6 cm;
  • threads, needle;
  • glue universal or adhesive gun;
  • line;
  • pins;
  • scissors.

Step 1

  • Cut 50 cm from the pink tape of 2.5 cm.

(+115 photos) Bows from satin ribbons with their own hands

  • Bend this segment by half the involve side. Well, join the fold line.

(+115 photos) Bows from satin ribbons with their own hands

  • Also squeeze your fingers in the middle of both ends of the tape, the invalid side.

(+115 photos) Bows from satin ribbons with their own hands

  • Wrap one end of the tape with the invalid side to the middle line, exactly for previously formed bends. Scalinate a pin.

(+115 photos) Bows from satin ribbons with their own hands

  • In the same way, bend to the middle of the second edge of the tape. Scalinate a pin.

(+115 photos) Bows from satin ribbons with their own hands

  • Fold the cradle twice. Fit the tops well.

(+115 photos) Bows from satin ribbons with their own hands

  • Expand back. Turn over.

(+115 photos) Bows from satin ribbons with their own hands

  • Wrap the left edge to the center. Install it so that the point of intersection of the two lower tapes was in the upper point of the stroke line. Scalinate a pin.

(+115 photos) Bows from satin ribbons with their own hands

  • Repeat on the other hand.

(+115 photos) Bows from satin ribbons with their own hands

  • Now take the needle and thread. Tie a nodule. Purge the central part of the craft of small stitches. Do not cut a thread.

(+115 photos) Bows from satin ribbons with their own hands

  • Pull the thread on yourself and take the center of the crafts. Additionally wrap it with several turns. Secure the thread and cut. The top you did.

(+115 photos) Bows from satin ribbons with their own hands

Step 2.

  • Cut 3 pieces of 12 cm long each from an olive tension of a 2.5 cm wide.

(+115 photos) Bows from satin ribbons with their own hands

  • Take one piece and fold half of its edges with an invalid side.

(+115 photos) Bows from satin ribbons with their own hands

  • Returning from top 1.5 cm, cut out the corner diagonally. Start from the middle, moving to the extreme points.

(+115 photos) Bows from satin ribbons with their own hands

  • Repeat on the other side. Clearly stick to these instructions, and your ribbons will be carefully and symmetrically cropped.

(+115 photos) Bows from satin ribbons with their own hands

  • Similarly, cut the rest of the pieces.

(+115 photos) Bows from satin ribbons with their own hands

  • Now put all 3 pieces smoothly at each other.

(+115 photos) Bows from satin ribbons with their own hands

  • Take the needle with the thread. Tie a nodule. Purge the central part of the segments with one stitch, while engaging them all together. Cut the thread.

(+115 photos) Bows from satin ribbons with their own hands

  • Now expand pieces. Position them so that their parties form rays, like a drawn star.

(+115 photos) Bows from satin ribbons with their own hands

  • Build a central part of the figure. Needle with a thread, hurt her.

(+115 photos) Bows from satin ribbons with their own hands

  • Pull the thread on yourself. Tighten the central part. Additionally wrap it with several turns of thread.

(+115 photos) Bows from satin ribbons with their own hands

  • The bottom of you made.

Step 3.

  • Place the upper part on the bottom. Connect them together with several turns of thread.

(+115 photos) Bows from satin ribbons with their own hands

  • Cut a small piece of a golden tape of a golden shade with a width of 0.6 cm. Place its ends with a lighter.

(+115 photos) Bows from satin ribbons with their own hands

  • Wrap this piece around the central part, periodically scrubbing it on the back of the glue. End Fasten on the back of crafts. Ready!

(+115 photos) Bows from satin ribbons with their own hands

And if you make this bow from the ribbon of the same color, it will be easily like this.

(+115 photos) Bows from satin ribbons with their own hands

Large bow of satin ribbons in the form of a flower

For work prepare:

  • Wide satin tape (for this bow used 8 cm width, it is possible less) -150 cm;
  • scissors;
  • threads;
  • needle;
  • beads or rhinestones;
  • Brook-brook for the core;
  • felt;
  • Adhesive pistol.

Master Class

Option first

We fold a long tape into the harmonica and tie in the center of the thread in the tone.

Soak each loop and gently straighten. Between loops we sew large rhinestones or beads.

Option two

More complicated, but more inactive.

Cut the ribbon to 29 identical segments. It is advisable to take a satin tape with a rigid edging - so the bow will be better to keep the form!

Next, take the segment, fold it twice, overlapping one edge of the tape to another. Stitch or glue edges. We repeat the same with the remaining ribbons.

Next, sew the details in four flower 9, 8, 7 and 5 petals.

Cut from a dense felt a circle.

We apply glue and alternately glue the flowers, starting from the largest and ending with the smallest.

The middle decorate the brother or beads and beads.

Luxurious lush bow do it yourself

For work prepare:

  • Satin tape (the more you need a bow, the longer and wider than the tape);
  • Clocks-crocodiles, paper clips or paper clips;
  • thread;
  • needle;
  • glue pistol;
  • the foundation for the hairpin;
  • cardboard;
  • pencil;
  • scissors;
  • Candle for cutting cuts.

Master Class

First we make a template - cut the square from the cardboard. More square - more bow. In the center cut out a long narrow recess (width of about 5 mm).

We have a satin ribbon, as shown in the photo, fix the clip and cut the end, so that it is a little longer the edge of the template.

Wrap a ribbon, as shown in the photo, and fix it. After completing three turns, cut the tip.

We take a needle with a thread and with a recess in the template we derive a needle. We flash all three turns of the seam "forward needle" and remove the ribbon from the template.

We assign a bow in the center.

We drag on the thread so that you can fix the base for the nipple below it. If necessary, we perform some more neat locking stitches.

We take a narrow tape, turn around the bow in the center and with the help of hot glue fix on the back side, simultaneously masking the locking seam under it.

Bow ready!

In Kanzashi technique

Recently, this technique especially loved with needlewomen due to its unusualness. In Kanzashi technique, you can perform a cute volumetric bow from satin ribbons even beginners:

  1. To begin with, we define with the materials. Since we work in Kanzashi, in addition to the tape, we also come in handy and wire.
  2. Cut the desired amount of material and put it on the table or any other level surface.
  3. We form two loops from the material. Tape edges impose on each other and fold in the middle. Hold your finger center so that our billet does not lose form.
  4. Tightly wind the center of the bow of the wire. So that the wire does not spoil the species - disguise it with a thin ribbon.
  5. Holding to the same sequence of actions, make other workpieces. To achieve pomp, we put the blanks on each other.

(+67 photos) how to make a bow with your own hands from the tape

Two-color and gift

From the ribbons of two different colors, you can create an elegant and stylish decoration. This technology is suitable even for beginners. This product you can decorate a stylish elegant dress and beautifully laid hairstyles. It is necessary to prepare a wide and thin piece of tape with a length of 15 cm each.

Step-by-step instructions for creating bows from ribbons with their own hands:

(+67 photos) how to make a bow with your own hands from the tape

  1. To begin with, measure the ribbon of the required size.
  2. Place one on the second and fold the ring.
  3. Connect the product blank is necessary with the help of glue, and then stroke.
  4. Publish a narrow tape in the center of the bow to close the place of connection of the ends. Must get a node.
  5. Ends need to cut off and put down.
  6. If a box with a gift to decorate a bow made with your own hands, she will look much better. Depending on the situation, it can be made lush and voluminous or modest, but elegant.

This option is very simple and easy to make an instruction:

  1. You must take a ribbon up to 2 meters long.
  2. It should be wounded on the revealed palm of the left hand, and then carefully remove it.
  3. The end should stay free.
  4. On one side of the workpiece you need to cut both corners, approximately 5 millimeters.
  5. In order to cut the tape on the cut, it must be accurately burned.
  6. The same procedure must be done on the second side.
  7. Next, the workpiece must be combined so that the cut parts are connected in the center.
  8. Ribbons should be tied with a free end.
  9. After that, each petal is painted to give the shape and volume.

(+67 photos) how to make a bow with your own hands from the tape

An independently created magnificent bow can please the young girl if it is an ornament on a festive box or woven into a beautiful hairstyle.

In order for such a bow to do, it is necessary to have 6 pieces of ribbons with a width of 5 cm and a length of 12 cm, as well as 6 blanks of 3 cm in width and 11 cm - in length. Everyone will need to burn carefully around the edges, so as not to be blown. Additional materials will serve a piece of feta, small beads and a thin elegant tape.

How to make a handsome bow from the ribbon step by step:

(+67 photos) how to make a bow with your own hands from the tape

  1. First, you should take the wider segments and fold them twice.
  2. After that, consistently assemble for one thread, pull out well and secure.
  3. These manipulations repeat for narrow segments.
  4. Cut the circle from feta, the diameter of which should be about 4 centimeters, and then glue a large billet to it.
  5. Take a thin braid, the length of which should be 12 centimeters. These segments need 6 pieces. Each fold ring.
  6. Having imposed on the petals, glue from the front side.
  7. Fix the product from the top of a narrow variation.
  8. On a piece of fabric, a diameter of 1 centimeter, pour a small amount of glue.
  9. Tightly in a circle place beads and cut.
  10. Decor is accommodated in the center and fix with glue.

With a plug, you can make a small decoration for the postcard. The process should include such actions:

  1. In the left hand you need to take the plug.
  2. Loop at her small ribbon, so that the edges be on the right.
  3. Next you need to roll through the bottom front end of the long-term fork.
  4. To do this, it needs to be removed between the teeth in the center and take the rear.
  5. Another end must be started in the same hole, only on top.
  6. After that, you need to turn the plug and bind both ends with two nodes.
  7. The resulting decoration is removed from the fork and cut the tips. So that they do not bloom, they need to neatly fall.

How beautiful to tie bows on September 1

The most popular decoration of hairstyles on September 1 is a bow. Bows from tapes: satin, wide, kapronova. Kanzashi technique, how to make a beautiful, school, big, lush, bulk, simple

It can be tied up with one of the 3 ways:

  • Collection bow;
  • 4 petals;
  • Luxurious flower.

For the 1st option, you will need a wide ribbon and gum.

  1. Hair is collected together and tie a rubber band.
  2. Then the ribbon turn the hair, one edge of the ribbon is left long, the other short.
  3. Long end folds several times and tied up short. Bow ready.

Bow "4 petal" is done like this:

  • The collected hair is wrapped with a ribbon and tie into a single knot, the ends of the ribbon should be the same;
  • From the tails fold the loops and tie a classic bow;
  • The remaining ends also fold and tie.

Before creating the next hairstyle, you must prepare the tape:

  • flash ribbon along the center;
  • collect accordion;
  • Give a ribbon shape of a bow or flower and sew.

Attach the bow to the gum, collect the hair together, pull the rubber band.

Booth of a wide ribbon

It will look very beautiful and originally a bow from a wide monophonic tape, if a narrow strip with an ornament will pass along the entire length along the entire length. Bows from tapes: satin, wide, kapronova. Kanzashi technique, how to make a beautiful, school, big, lush, bulk, simple

Bath creation scheme:

  • decompose a wide strip of tape on the table;
  • Along the middle line and at the edges, attach a narrow bright strip of hidden stitches with a drawing;
  • finished tissue strip roll into hand;
  • tie;
  • Remove with your arms and straighten.

Bow on a gift box

Volumetric bows will always be appropriate on gift boxes.

Bow-ball making:

  • tape folded in several layers;
  • The resulting rectangle cut corners;
  • Move cuts to the center, carefully moving the tape;
  • The most narrow part of the tape is well tightened;
  • In turn, pull out all the loops, forming a ball. Bows from tapes: satin, wide, kapronova. Kanzashi technique, how to make a beautiful, school, big, lush, bulk, simple

To create a lush bow, you will need 3 ribbons different in width.

  1. The lane is medium width to lay in 4 layers, layers should be located over the other.
  2. Also folded a wide band and place the Cross-cross-tier tiers.
  3. Place the 1st bow from above on the 2nd.
  4. Center to pull the thin ribbon.

Sources

  • https://mirpozitiva.ru/articles/36027-kak-sdelat-bantik-iz-lenty-svoimi-rukami.html
  • https://nyaskory.ru/podarki-svoimi-rukami/banty-iz-lent.html.
  • http://portniha.com/dlya-detej/kak-sdelat-bantiki-iz-atlasnoj-thing-svoimi-rukami-poshagovaya-instrukciya.html
  • https://gidrukodeliya.ru/banty-iz-lent-svoimi-rukami.
  • https://-r-s.ru/banty-iz-atlasnyh-lent-svoimi-rukami/
  • https://-r-s.ru/kak-sdelat-bantik-svoimi-rukami-iz-lenty/
  • https://handsmake.ru/kak-zavyazat-bantik-iz-lentochki.html

[Collapse]

Share a record with friends

Lentochnyj-Krasivyj-Bantik-Svoimi-Rukami-768x432-1

Bows are considered to be one of the most popular decorating elements. True, it is not always possible to make a miniature decoration yourself. For example, it is quite difficult to create a decor for postcard, hairpins or boutonnieres. In such a situation, you can tie a bow on the fork. To do this, you just need to explore step-by-step guide and watch the learning video.

Where it can be used

Miniature bows from satin ribbons are very widely used. They are used for various purposes:

  • Decor of jewelry and garment items;
  • registration of gifts;
  • Decoration of work, which were performed by applying the Scrapbooking technique;
  • as an additional decorating element in the process of serving the table;
  • Supplement brooches, hair bandages or hairpins;
  • Creating all sorts of crafts;
  • Sewing puppet clothes.

Before tie a bow on the fork, you need to pick up suitable ribbons. They can be purchased in stores for needlework. The price of these materials directly depends on quality and width. Preference is recommended to give products capable of keeping the form. Most often resort to using the following of them:

  • Satin. Have special popularity. You can find both monophonic options and a pattern, adding Lurex;
  • rep companion. Ribbons in structure are quite rigid, they are framed using edges. Such materials are perfectly held;
  • from organza. In this case, a small bow is obtained incredibly easy and seems to be weighty.

When creating miniature structures, materials are used in the range of 3 - 10 mm. If the product should be greater, the choice stops on a width to 15 mm. Large accessories can be tied with your own hands. In this situation, the braid must have a thickness of 12 - 25 mm.

Take up how to make a bow with a fork, special attention should be paid to the shades palette. When it is elected, it is necessary to take into account several important points:

  • Snow-white Excellent combined with all tones, but when it is used, the composition is cold;
  • Yellow, like orange , it looks very playful. Such colors are recommended to be combined with violet, green and blue;
  • Pink Shades are considered very sentimental. Among fashionable combinations, the combination of this tone with gray should be highlighted;
  • purple , as well as blue with green, belong to the group of neutral tones. They are harmoniously combined with most shades, often used as a basis, but can and complement the composition;
  • Brown and black Tones are used extremely rare. True, if they additionally decorate them with rhinestones, a bow of such a ribbon will be very solemn.

A combination of various types of materials and shades is allowed. You can find entire sets corresponding to the selected subject or with ideally combined shades.

Suitable materials and decorating elements

To form bows on the fork, first of all, it is necessary to take care of the presence of the ribbons directly. In addition, the work will be useful:

  • directly the fork itself equipped with four teeth;
  • scissors;
  • a ruler or meter to determine the length of the ribbon;
  • lighter or ordinary matches necessary for edges processing;
  • decorating elements;
  • Thermopystole or glue that fixes the decor details will be fixed.

Decor in this case can be accomplished on glue and fifty. Similar decorations in the widest assortment are presented in stores for creativity. We are most often resorted to the use of the following of them:

  • rhinestones. Create imitation of real stones;
  • Beads. Can be acrylic and plastic, shiny and even matte;
  • core. Presented in different design. Excellent look at both volumetric and brilliant decorating elements.

Naturally, it is most convenient to use the glue decor in the work, and not sewn.

Testing methods

Regardless of which form it should be design, there are certain rules for its tape from the tape. The cutlery when performing work should be in the left hand. The concave side is located at the top. The ribbon itself is in the right hand.

At the final stage, the tips are cut to the desired length and are burned with a lighter or matches. Thanks to the execution of such manipulations, it is possible to prevent squeezing.

The length of the pods of miniature accessories is only 1 cm. In the case of bulk elements, the tips are better left long. They can be given the shape of a triangle, rectangle or oval.

Plain

There is nothing easier how to make a bow on a plug by applying this technologist. Tie it according to the following workshop:

  1. The cutlery is wrapped in a ribbon in the base of the tillery in such a way that both tips are on the right. The top at the same time should be approximately a couple of centimeters.
  2. The bottom, the long tip is superimposed on the top and passes from itself down between the central cloth. Then it is displayed on the left side.
  3. The right end rises up and skipped over the billet into the hole between the central cloth. At the same time, both edges are on the convex side.
  4. Now the fork unfolds, and the ribbons on it are tied, after which the accessory is removed from the teeth.

Prostoj-Rozovyj-Bantik

Working with a fork is extremely important to ensure that the facial part of the ribbon is always at the top and did not twist. Otherwise, the product will not be very beautiful.

Double-layered

In this case, the bow on the fork is tied in a couple of layers. Due to this, he acquires a particularly attractive appearance. Work is done in just a few stages.

Ribbons on the table device are located in such a way that the tips are on the right side. It is extremely important to ensure that the upper is three times longer than the upper one. He acts as a worker.

Etapy-Raboty

The working edge is superimposed on the upper and excreted between the central cloth. It is directed down and on the left side. The tips are on both sides.

KAK-SDELAT-BANTIK

The end, which is a worker, is raised above the wetting obtained, is dragged through the extreme of the teeth and is displayed in the center towards down and right. Thus, both edges are on the right side, but a worker on a convex, and still at the same time on concave.

Krasivyj-Bant.

The working tip through the top pulls down between the central elements and is removed to the left. At the same time, there are two layers of tape on the first and fourth clur.

OriginalNye-Podarochnye-Banty-Svoimi-Rukami

The working part is now reappearing between the central elements up and is displayed on the concave side.

BANT-ROZOVOGO-TSVETA

The edges are associated with a nodule on the wrong side. Facial in this case is located on the convex part of the cutlery.

Malenkie-Bantiki-Svoimi-Rukami

It is best to knit such a bow from the satin ribbon, the width of which does not exceed 1 cm.

Svoimi-Rukami-1

Small

Tiny bows from ordinary ribbons are made according to the following scheme:

  1. Ribbon is passed from itself between the third and fourth teeth.
  2. The tip is displayed between the first and second, it goes down and right. Thus, both edges turn out to be right, but one is higher than the other.
  3. The upper element is skipped into the center of the table appliance and moves to the convex part of it.
  4. The edge that remained on concave, lifts up. It between the central teeth is derived on the convex part.
  5. The fork is unfolded, and the details are associated. After that, the accessory is removed and spreads.

MalenKogo-Razmera.

As a result, it turns out a neat miniature decoration. With it, you can decorate small items. For example, a children's hairpin.

Gift option

To create an original decor on gift wrapping, a two-color bow can be used. It is imperative that he harmoniously looked at the packaging film or paper. With its manufacture, you should follow such instructions:

  1. A pair of tapes of contrasting shades are taken 10 cm long. One of them will become the basis, and the second element of the decor.
  2. From the main creation of a simple bow of technology described above.
  3. It turns into a ribbon that is used for the decor. To this end, it is pulled out between the central teeth on the convex part of the fork.
  4. The cutlery turns over with a convex side upwards, and the tips are associated with the tips. These actions are performed on the involving side of the accessory.

Dvojnoj-Krasivyj-Bantik

As a result, the original decoration with 4 edges and a contrasting center is obtained.

Recommendations regarding decor

Even the most inconspicuous bow will be bright and expressive if you decorate it with decorating elements. Used for this purpose rhinestones and beads. It is only necessary to remember that with the excess number of decor, the product will look tasteless.

In order to create an original decoration, you can do the following:

  • Sew or glue the core core in the form of a flower, heart or beads;
  • On the wings of the design, fix rhinestones or beads. They can create a contrast or be the same tone as the tape;
  • Large accessories with sequins or beads.

If the product is intended for brooches, hairpins or scrapbooking, then a lot of decorating elements can be quite enough. It is quite different about the gift packaging. As a rule, it immediately throws out after unpacking. Therefore, there is no point in using overly a lot of decor.

Tie a bow through the use of an ordinary plug is not at all difficult. You just need to select the appropriate technology and strictly follow the instructions. Soon she is no longer needed. After all, after repeatedly performing such manipulations, all actions are remembered and no longer cause difficulties.

Video

Share a record with friends

Main photo

Without anything can not do any girl? Without bows! After all, they make it the most different: a cute, funny, serious, young and adult. Bows are put on when they make a hairstyle in a kindergarten and school, for holidays or just for every day. They decorate not only hair, but also handbags, phone covers and even clothes! This is an excellent gift to any young fashionista.

And if he is made with his own hands, it will definitely get charming and so good anyone else! Handmade is always in price. Do you want to learn your hands to create real little masterpieces? Then our material is for you.

Of course, very beloved and unusually popular are satin. This is understandable: they have the brightest colors, besides, they are on the pocket of any needlewoman. But you can also use the rep companion tape, satin, brocked, fabric, silk, or velvet. Bows of them are no less interesting and original. In addition, it is a great way to show fantasy! Fatin, organza and the most different fabric - do not believe, these are also materials for your creativity. Turn on the fantasy and create with us.

Bow on hands from satin ribbon

Satin ribbons are the most favorite and affordable material. And we offer to start with them. If you are a novice in this matter, first you should learn to tie a beautiful bow from the finished ribbon on your hands. Make it quite easy.

This is a very simple tying technique. And we will help you: carefully follow this step-by-step video. A little time, attention, and you will definitely work out!

How to starch the satin ribbon?

To close the satin ribbon, you will need starch and water.

The proportions are: for one art. Spoon Starch Take one glass of water. First, dissolve starch about a third of a cup of cold water. Put the remaining water to bask on the stove. As soon as it boils, a very thin ridge pour dissolved starch into it. Constantly stirring, cook for about 5 minutes.

Remove from the fire, cool slightly and put in a mixture with a tape. Keep 20 minutes. Then squeeze, dry and join the paper.

Now you can make a bow from the ribbon, It will be smashed less and keep the form!

Beautifully tying a small bow on the fingers

If you do not know how to tie a bow from the tape on your fingers, these photos will help you with this. There is nothing complicated here too. Of course, you first stand a little stretch, but then you will do it with ease.

On the fingers a mini bow

This cute little bow can be decorated with hairstyles, clothes or handbags. In addition, this is the fastest way to beautifully tie a bow from the satin ribbon. On our pictures you can see more and more detail.

Double mini banta tying scheme on fork

Charming small bowls from satin ribbons can be tied in a very unusual way - with the help of the real table appliance - forks! Do not be surprised. These baby bows will decorate a funny postcard, hairstyle or clothes of pupae, rubberry or hairpin for little girls.

The master class in their manufacture is presented on our photos.

Double mini bug on fork photo MK

A very tiny bow can be tied even on a comb!

Classic School Booth from Kapron Tape

The classic will always be in fashion. It is appropriate anyway. The same applies to wide bows, especially school. What kind of hairstyle is associated with the holiday of first-graders on September 1, the last call or graduation? Right! With white big bows on your head!

We suggest you do just such. It is very elegant and volumetric. Perfectly decorate tails and pigtails. About how to make it stages, read below in our material.

White bows balls

Before proceeding with work, prepare not too short segment of the kapron tape. The optimal length is about one meter. And the width should be at least ten centimeters.

Step 1. To begin with, our ribbon you need to take, bend it very carefully in half. And then free edges be sure to be made by pins. Step 2. The edges that are on the sides, you need to fall as a match or lighter. Do it quickly, so as not to burn all the product. Then scroll these edges too with each other. Step 3. To this edge, where you sewed two ends, see any hair band chosen. Step 4. Now keep sturdy threads along the fold line. Step 5. Remove the pins and accurately roll up and pull the tape. Step 6. . Manually form a magnificent bow and once again squeak it with a needle with a thread.

Interestingly, the classic method of tying a bowl is called yet French . And therefore, dear readers, do not look for a French bow, this is our, familiar and beloved - classic!

Balls from organza

Organza - gentle and air material. From it you can make magnificent festive and casual decorations on the hairpin and rubber band, put on the rod. They are perfect for girls, girls of different ages.

To create it, it will take quite a bit: a meter ribbon 2,5-3 centimeter width, threads, a needle, a glue gun, a rubber, a piece of felt of the ribbon color. Detailed MK watch for free in this video.

Very smartest and festively watched huge balls balls from the fate. In order to make such a gorgeous ornament, you will need two segments of a 1.5 m with a size of 1.5 m per 15 cm. You will get a big magnificent bow, which will be appropriate even at the wedding celebration!

From two tapes width 5 cm

This is one of the simplest two-color bows that even a beginner master can quickly do. The process, of course, is unprecedented, will require time and patience. But the result will be very pleased.

white-beige

* Photo MK: Aljona Batistik

So what do we need?

instruments

  • Purchased ribbons. They must be two species - different colors and widths, length - the same. For example, you can take white and beige colors.

    The length of the tapes is 47 cm. And the width of one - 4.5 cm, in the other - 5 cm. You still need a narrow segment of the tape to the tone of your bow. The width of about half a centimeter, 10-12 cm long.

  • Leaf. This is a very important item. It can be made of a dense piece of cardboard. Dimensions: Height - 20 cm, and width - 11 cm. It requires exactly in the middle to cut the hole with a width of approximately 0.5-1 cm: starting on top and not reaching the end 3-4 cm. Laman for a bowl
  • Beautiful middle for a bow on your taste.
  • Threads, needle, scissors, glue "moment" (can be glue gun), lighter.

Now proceed to the process.

Stage 1. . Wrap the first ribbon slightly macasok around the pattern. On the front side there should be three ribbons, on the wrong one - two. We fasten them with clips.

step 1

Stage 2. . We take a thread with a needle and gently flashing the ribbons through the hole in the lecture. Now we remove our billet, do it very carefully.

Step 2.

Stage 3. . Next there is nothing complicated: just tighten the thread and form the first bow. I fix it again with a thread and needle.

Step 3.

Stage 4. . Exactly the same manipulations are carried out with the second bows. Send to the second - rubber band.

Step 4.

Stage 5. . We take two bow and sew them with each other. It is clear that the lower should be with a rubber band.

Stitching

Stage 6. . And now it's time to remember about our thin ribbon. It needs to wrap two bows several times to braid it once again. Be sure to make ends.

Step 6.

Stage 7. . We glue the selected middle to a bow. Now you can braid pigtails and put on bright hair bows taken by us.

We decorate the middle

It is very important to correctly choose the correct combinations of colors for multicolor bows. Only in this case the result will be very pleased, and the product will look harmoniously.

To help you - our color circle (combination of colors) >>

3 photos MK

Multilayer option, see the assembly scheme:

Multi-layered

School option:

Multi-layered

Third idea:

Rose

Bow Mickey from Fatina and Rec

This amazingly cute bowl will charm any young princess. In it, it will be similar to the American cartoon hero Mickey Maus. The product is very unusual. Reminds a small bow with a skirt, only inverted.

Bant Mickey

You need to cook:

  • A piece of tulle about 3 m long, choose the width to your taste: if you want a big bow - choose from 10 cm;
  • Two pink bows in white polka dots. You can make them yourself;
  • Two clamps or two rubberbies;
  • Glue gun and scissors.

Prepare

Step 1. Cut the tape tape half. Take one part and wrap it on your hand. Remove from the hand.

Wash

Step 2. Cut a piece of Tulle about 5 cm and tie out a blank removed from the hands right in the center.

Photo

Step 3. Cut the tulle along the edges of the bow. Relieve and flip.

Flues of the middle

Step 4. With the help of adhesive guns, glue the billet from the tulle to the climb or rubber band.

Stick to the barn

Step 5. To the bottom of the workpiece, glue a pink bow. Decorate your tails or bundle.

TOTAL

If you stick a bow with tails, it will also look very cute:

Option

From the reps tape and lace

If you have a schoolgirl, which is very capricious in choosing hair jewelry, then give her bow. And be sure - she, surely, will remain satisfied!

for school

* Photo MK: Maria goodies

Prepare to start:

  • Two reps tapes: One of them should be blue, and the other with a bright print - in our case it is a white ribbon in small blue polka dots. But you can choose your colors. The width of the tape is small - only 2.5 cm, and the length is 21 cm;
  • White lace: You also need it a bit - 43 cm and width - 4 cm. It will need to be cut into two equal parts;
  • White satin tape: its width is 2.5 cm, and the length is 43 cm. It will also need to be cut into two identical parts later;
  • Beautiful middle for a bow;
  • rubber;
  • Special glue "moment" (you can take a glue gun);
  • Threads and needle.

Now let's start sewing our bow.

Stage 1. . Take the reps' ribbons. How to remember, you have two. Now everyone needs to be very neatly folded in half. Films need to be carefully sold to be visible.

one

Stage 2. . In the hands take one of our ribbon. And one edge should be wrapped in a cute to the middle split. Perhaps the first time it will not work, but you work out. End fasten in the middle of our tape. Similarly, do with another end. What should we get? And these are two "kulechka" on both sides.

bend

Stage 3. . Then make the same with another ribbon. Each billet we flash the surrender to a solid thread.

Firm

Stage 4. Two blanks need to put each other, preferably tight, and then flash them together. If you are all done correctly, you will lie in the form of a butterfly.

Butterfly

Stage 5. And now you will prepare our white satin ribbons and openwork lace. We act like this: first put the ribbon, we put our lace on it. To glue them, prepare a lighter. Now very neatly along the edges spend fire. The edges are lightly cut and glued. Similarly, we make the second workpiece. We are tightened with a dense thread in the middle.

Opali

Stage 6. . Send to the billet from lace and tape gum. Remember that the rubber band is best selected in the tone of the bow.

Stitch together

Stage 7. We collect our beautiful fluffy bow, glue all the parts with each other, including the middle.

glue middle

From braid and bugs

Such a bowl is perfect for the rim. You can also decorate a small clinch. Hairstyle will look cute and unusual.

From Tape

So, we will need:

  • 1-2 meters Tesma, choose the color according to your desire;
  • a small piece of felt tissue (you can take a felt or any other soft tissue);
  • Beautiful button;
  • Hair Climber;
  • glue gun.

Now proceed to the process itself.

Step 1. Cut two felt mug with a diameter of about 5-6 cm. We take one circle and sew the braid to it.

like this

The principle of this: starting from the outer edge in a circle, gradually fill the entire circle. Each new turn braid must slightly cover the previous one. As a result, you must get a neat and tightly filled circle with rushes.

round

Step 2. We draw up a middle: Send to a mug with a braid button.

Butt

Step 4. We take the second circle, do neat incision. Insert the hair pressure closer.

Zavigin

Step 5. Printe the two parts to each other.

Photo

We can bind the braid - it will turn out more original! And from the colon bows of the bow will turn out more.

Two-color original flower

Of course, you will have to work yourself on your own, but you will definitely believe that no one will definitely be such an original decoration!

Original assembly

Prepare to start:

  • Reppetant tape of two colors, each color take no more than 60 cm;
  • Beautiful middle;
  • Threads and needle.

We present you a step-by-step master class with a detailed description.

Stage 1. . Each tape can be cut for 6 pieces of 10 cm.

one

Stage 2. We start sewing them with each other. We take the ribbon of the same color (in the photo of the white), put on it to the ribbon of another color (green) so that she covered her half. We sew them at the top.

2.

Stage 3. . Take the white tape and put it under the green, which has already sewn. Sust again all at the top.

3.

Stage 4. Repeat the drawing: Take the green again, the white, the green again, and so on.

four

As a result, you should get like this: top of the ribbon of green, under them - white.

five

Stage 5. . Now tightly sew the prepared workpiece at the top, strongly pulling the thread. So that the middle is not broken, make a few more stitches. You have to get a blank resembling the sun: the rays should be alternating in color.

pull

Stage 6. Turn your blank. Bend white rays and suck on the needle. Do these manipulations with all white rays. Sing the ends to the middle.

Stage 7. Now take a green ray and thread it through the neighbor white as in the photo. Sust in the middle.

Green ends

Also do with the rest of green rays.

hereinafter the same

Step 8. Turn over the resulting workpiece and attach a round middle.

Ready

The resulting flower can be glued to the gum. It is an excellent handmade decoration and for a handbag, and as a decor for a cover. And from it you can make a wonderful interesting brooch.

And in this article, read how to make a hairpin with your own hands >>

Bow on the template

This is one simplest bows. It is made according to the template that is cut in advance.

Simple option

* Photo MK: Met (ettibrasletti)

You will need:

  • Ribbon (rep or satin). You can take a width - a small bow is obtained from a ribbon to 2 cm wide. Length - depending on your stencils;
  • Two seminal star stencil, one of them is less than half. In the middle of the stencil you need to cut a hole in order to be tape. To print our pattern - click on the picture, it will increase and you can download. leaf

    In this MK, the stars were used with a diameter of 9 cm and 6 cm.

  • Durable threads, needle, sharp scissors, lighter or matches, glue (best adhesive gun).

Now we will tell you, dear readers, step by step, how to make a bow from the ribbon with your own hands using a stencil. By the way, it is perfect for beginner masters.

Step 1 . Out of the edge of our tape and very carefully do it in the center hole. Now you need to wrap our ribbon around the first beam. And to bring it back to the center. You have to get a petal.

Wrong on the template

Step 2. . In the same way, you turn around all our rays of the template.

continue

Step 3. . Now you need to flash our billet in the center.

strike

Node hide. Do not forget to fall out the cut end of the ribbon.

cut

Step 4. Remove the stencil. Make similarly to another such workpiece and one on a small pattern. As a result, you should have two large flower and one small.

Repeat

Step 5. We make a middle: Cut a small piece of ribbon (about 12 cm), we pour it on both sides by a lighter, we collect and tighten the tight thread with a needle.

Step 6. . We collect and glue all the workpieces: first two large, then one small and middle. Send them to rubber bands, clamp or hairpin.

end

Flat bowl of ribbons of different widths

Such a cute bow is very and very easy - you will need 20 minutes, no more. It can be attached to the rim or rubberry, decorate them a dress and even shoes.

Brown design

* Photo MK: knopka.baby

So, prepare:

  • Three types of rep and tape: thick one-photon tape 2.5 cm wide - length 40 cm; A narrow one-photon tape with a width of 0.7 mm - length 33 cm; Thick tape with a 2.5 cm wide - length 22 cm;
  • Beautiful decoration for the middle (it can be the cabochon, bright rhinestones or button - choose to your taste);
  • Threads, needle, scissors, glue.

We start doing our bow.

Step 1 . We take a one-photon thick ribbon, fold it in half and cut.

Popolam

At the ribbons we plan a middle and every end we will be adjusted to it on the one hand. To make it convenient for you, fasten them with a pin in the center. Exactly the same manipulations are carried out with the second ribbon.

fold

Step 2. . We fold the two obtained billets with each other slightly macas. You must have a billet, similar to a butterfly.

fold on each other

Step 3. . To put on the resulting workpiece, we first our adeed tape, and then it is already narrow on it (cut off a piece of 23 cm long), the ends bend to the wrong one.

Crawling to Incain

Step 4. . The remaining piece of the tight ribbon ribbon is perpendicular to the bowl of bow butterfly. Then we tighten the bow, cut off the unnecessary pieces and stitch.

Step 5. . Now it's time to decorate the middle. It can be seed or glued.

Outcome

If you add such a bow with long ribbons that attach a slightly at an angle to the middle, you will get a so-called type of bow - bow-tie.

"Sandy with pomposhki" on the hairpin

These bows-candies for hair are more suitable for our cute babies.

Pomposhka

You will need:

  • a small piece of tulle 12.5 cm wide and a length of 21 cm;
  • very small piece of silver ribbon (no more than 5 cm);
  • Color pumps with a diameter of no more than 0.5 cm - about 70 pieces;
  • Adhesive pistol. That's all!

Stage 1. . On a piece of tulle evenly on both sides of the center for dispense of pumps.

We distribute pomposhki

Stage 2. . Lower edge Overview on 1/3. The edge must close the pomponiki. Similarly, over the top edge on 1/3. He must also go to the pumps.

Top

Stage 3. . Over the edges on the left and right so that the pomponices are distributed on both sides of the center evenly.

Survision from the side

Stage 4. Drip glue droplet and squeeze the center so that you have a bow.

Squeeze, glue

Stage 5. . Stick a piece of silver (pary) tape in the center.

Middle

Stage 6. Stick a bow on the hairpin. Your child will be happy!

glue to the hairpin

Lessons and master classes for inspiration

We present you a small collection of ideas for inspiration. You can gradually replenish it.

Pink tenderness from lace and satin

This sweet and charming bowl with lace is suitable for festive outfits, and for every day. You will need quite a bit: a piece of satin and lace tape, beads and a little bit of free time.

White-blue Kanzashi

School style option. Make such a miracle for your student, and it will be unique. If you make a bantum from a velvet tape, that is, the blue satin replaced to velvet, you will get no less interesting option!

Three ways in one video "How to make a butterfly from the ribbon" from Svetlana Zolotareva

If you are very novice, we advise you to watch this video - all stages are shown in it very simple and understandable.

Unusual way to fold the ribbed ribbon

There is nothing complicated, but the result simply admires!

Gentle bows from the reps tape

This lush bright bows is perfectly suitable not only for babies, but also schoolgirls. You will have to work a little over them. See the master class on making in this video.

Luxurious delight

Such bows for real princesses and queens! New design just luxurious.

Baby on the first tails:

  • Master class from Alena Khoroshilova. Everything is very simple: fold the harmonic ribbon and go. You will have a real funny multi-layer children's bow. For details, see the video:
  • Master class from Tatiana Marchukova. Adorable cute godbades for baby girls See online in this video:

Testing technique Bantia

In Soviet times, all girls ran to school with such bows! The tapes were simply walked into the pigtails, they did "lamb". Now not all moms know how they did it before. In this video, it is described in detail about how to have a bows in the braid.

Before watching it, make tapes. If the hair is slightly lower than the belt - their length should be at least 2.5 m, if higher - enough 1.5-2 m.

How to tie a classic bow

How to tie a classic bow
YouTube Channel Docrafts

What do you need

  • Tape;
  • scissors;
  • Bilateral scotch or glue gun.

How to make a bow

Enter the left side of the ribbon on the right so that the loop is turned out.

How to tie a bow: make a loop
YouTube Channel Docrafts

On the left side, make a similar one.

Make a second loop
YouTube Channel Docrafts

Take the right loop to the left.

How to tie a bow: Cross the loops
YouTube Channel Docrafts

Stretch a loop that is now located on top, in the hole below.

how to tie a bow: pull the loop
YouTube Channel Docrafts

Pull the loops to the sides, forming a node.

how to tie a bow: form a node
YouTube Channel Docrafts

Turn the bow so that both hinges are on top, and the tips are below. Holding the node, pull the right end of the tape. The left loop will become less and more careful.

Pull the right end
YouTube Channel Docrafts

Similarly, pull the left end of the tape.

how to tie a bow: pull the left end
YouTube Channel Docrafts

Now simultaneously pull for both hinges. The node will be stronger. Cross the resulting bow.

Conduct a bow
YouTube Channel Docrafts

Fold one tip ribbon along half. At a distance of several centimeters from the node cut it at an angle. Scissors should look towards the bow.

how to tie a bow: cut the tip
YouTube Channel Docrafts

In the same way, cut the other end of the tape. Get bow for a gift.

What else there are options

Another very simple way to tie a neat bow:

If you need to make a very tiny bow, use the fork:

Here's how to tie a bow immediately on a gift:

And if you make one more the same on top, the packaging will look more original:

How to tie a double bow on your fingers

How to tie a double bow on your fingers
YouTube Channel Red Ted Art

What do you need

How to make a bow

Spread the index and middle fingers. Verify the tape from above and wrap them with it.

How to tie a bow: Wrap your fingers ribbon
YouTube Channel Red Ted Art

Long right end wrap the fingers again.

how to tie a bow: repeat
YouTube Channel Red Ted Art

Stretch the same part between the fingers under the loop.

How to tie a bow: stretch the tip under the loop
YouTube Channel Red Ted Art

Rent a ribbon from top to bottom. Her tip skip through the bottom loop.

how to tie a bow: skip the tip in the loop
YouTube Channel Red Ted Art

Pull the tape and tighten the knot. After that, a shaped bow will be visible.

Tighten the bow
YouTube Channel Red Ted Art

Remove it from the fingers. The front side will be behind, so turn the bow to yourself. Get hinges.

Roll into the bow
YouTube Channel Red Ted Art

Cut the tips in direct or as in the previous method.

What else there are options

In this master class, the bow tie a little differently:

How to make a bow with a stapler

How to make a bow with a stapler
YouTube Channel Aira Tran

What do you need

  • Tape;
  • stapler;
  • scissors;
  • double sided tape.

How to make a bow

Take the tape and generate one edge in your direction for several centimeters.

Send a ribbon
YouTube Channel Aira Tran

Send the ribbon to the top about the middle of the curved part.

How to make a bow: Send another edge
YouTube Channel Aira Tran

Holding the ribbon in this place, lift and remove it so that the loop is down below. If finding it difficult, see the video instruction below.

Make a loop
YouTube Channel Aira Tran

From the free end of the tape, take another loop below. To do this, throw a ribbon through the bottom. Stick the bow in the middle.

how to make a bow with your own hands
YouTube Channel Aira Tran

Make some more loops from different sides.

Form the bow with your own hands
YouTube Channel Aira Tran

Build a stapler bowl in the center.

How to make a bow: Fix the tape
YouTube Channel Aira Tran

Excess tip Cut. Roll it and secure the stapler.

Make a middle of a bow
YouTube Channel Aira Tran

Stick the item to the center of the bow, the scales of the bracket.

How to make a lush bow

How to make a lush bow
YouTube Channel Hallmark Gold Crown Stores

What do you need

  • Wide tape;
  • scissors;
  • narrow tape;
  • Bilateral Scotch - optional.

How to make a bow

Turn the end of a wide ribbon so that it turns out the loop. The details are visible in the photo and in the video below.

Bow do it yourself
YouTube Channel Hallmark Gold Crown Stores

Holding the tip of the tape, turn it so that it is not in the middle, but from the top edge.

how to make a bow: scatter loop
YouTube Channel Hallmark Gold Crown Stores

Wrap the loop with ribbon 5-6 times. The more, the more magnificent the bow. Exterior cut off.

How to make a bow: Wrap a loop with ribbon
YouTube Channel Hallmark Gold Crown Stores

Bend the ribbon in half. Cancel it around the edges on the spot of the bend.

how to tie a bow: do shorts
YouTube Channel Hallmark Gold Crown Stores

Cut a piece of thin ribbon, put it on the table and place a folded wide ribbon from above. Thug thin into the cuts and link the double knot.

How to tie a bow
YouTube Channel Hallmark Gold Crown Stores

Holding the ribbon in the center, pull out the inner loop. Remove it slightly into the opposite side.

how to make a bow: pull the loop
YouTube Channel Hallmark Gold Crown Stores

Repeat the same with the next loop, stretching it into the other direction.

Pull out the second loop
YouTube Channel Hallmark Gold Crown Stores

Continue to pull the rest.

How to tie a bow: keep pulling loops
YouTube Channel Hallmark Gold Crown Stores

Turn the bow and hang the ribbon. The bow can be glued to a gift or tie the thin ribbon to widespread around the box wide ribbon.

What else there are options

In this master class, the middle of the tape cuts a little differently, and it also binds to the wire, and not a thin ribbon:

Here are different loops. Ribbon turn around the fingers, making the figure like eights. Then the loops are pulled in the same way:

And this bow is made with a plastic screed:

How to make a volumetric bow of individual strips

How to make a volumetric bow of individual strips
YouTube Channel The Flower Art

What do you need

  • Packaging paper or ribbon (about 3 cm wide);
  • scissors;
  • line;
  • Pencil - optional;
  • glue gun;
  • cardboard.

How to make a bow

Cut the paper or ribbon on the strips. You will need four parts with a length of 28 cm, four - 23 cm, one - 9 cm. The width should be 3 cm. You can cut the strips of a different size, but try to maintain the proportion.

Take one long strip and glue its edges so that it turns out the ring.

how to make a bow: glue one strip
YouTube Channel The Flower Art

Fold the detail in half so that the seam is opposite the bend. Apply glue to fold. Attach this place to seam and stick. You will get an "eight."

Make the "eight"
YouTube Channel The Flower Art

Make the same details from the rest of the long strips.

Bow do it yourself: Prepare other details
YouTube Channel The Flower Art

Cut from cardboard a small circle. Apply glue into its center and attach one big "eight".

Bow do it yourself: Stick the item to the cardboard
YouTube Channel The Flower Art

On it perpendicularly glue the second item.

Stick the second detail
YouTube Channel The Flower Art

Get the third top, and then fourth. Position them so that new loops are between the previous ones.

Add other details
YouTube Channel The Flower Art

Four "eights" are smaller sharpening in the same way. Each of them should be placed parallel to one of the large parts. In the video below the entire process is shown in detail.

Bow do-it-yourself: Get smaller details
YouTube Channel The Flower Art

Last small strip glue into the ring and attach to the middle of the bow. Finished decoration stick to a gift.

How to make a voluminous angular bow

How to make a voluminous angular bow
YouTube Channel Arena Blake

What do you need

  • Packaging paper or tape (about 2 cm wide);
  • scissors;
  • line;
  • Pencil - optional;
  • double sided tape.

How to make a bow

Cut the paper or ribbon on the strips. You will need three pieces with a length of 20 cm, three - 15 cm, one - 7-8 cm. The width should be about 2 cm. You can use other sizes, but try to save the proportions.

Stick to the edge of one long strip slice of tape from the back side. Get the edge as shown in the photo.

Generate edge strips
YouTube Channel Arena Blake

Then glue the edge to the front side of the strip. You will get something like a cone.

Bow do it yourself: glue the strip
YouTube Channel Arena Blake

Repeat the same thing on the other side of the strip. Thus, glue the remaining five long details. The shortest will need later.

Prepare details
YouTube Channel Arena Blake

Stick large parts on each other so that all corners look at different directions.

How to make a bow: glue big details
YouTube Channel Arena Blake

Jump the remaining three details on top. The corners of each new strip must be located between the corners of the lower parts.

Stick smaller details
YouTube Channel Arena Blake

Give the edges of the short strip and stick the resulting ring in the middle of the bow. Attach the bow to the gift.

What else there are options

A similar bow can be made from one tape using a special homemade device:

Girl with a bow in hair
How to make a bow of tape: pixabay

Bows adorn the hairstyles of girls and dolls, enliven gift boxes and flowers bouquets. Experienced masters know how Make a bow of ribbon smooth, neat and durable. Tips, as with the help of unacceptable household items or without them to make a chic bow, will be useful for any decoration.

How to make a bow tape bow

Bows of ribbons are attached to hairstyle with round rubber bands, hairpins or decorate hair rim. Consider simple options like tie bows from ribbons of different widths:

Bow on a fork

Such a miniature decoration is made for dolls or attach it to the rim for the baby, which still has little hair for a full hairstyle. This bow is made of a narrow (0.5 cm) ribbons up to 20 cm long. Use the usual dining fork in this way:

  1. Take the plug into the left hand, picker the ribbon so that both ends are right.
  2. Now the end of the ribbon, which is rear, wrap the two cloves of the fork, stretch it between them from the bottom under the ribbon from themselves, then from above.
  3. Loop formed on the right. Passe to it from below the working end of the tape, tighten in the middle to the knot.
  4. Remove the bow from the plug, cut the tips and place them with a lighter, slightly touching the cut.
Hands tie a bow on a fork
How to tie a bow on fork: YouTube / embodied ideas

How to tie a bow of wide ribbons

The lush bow can be tied on a hand from a ribbon 5 cm wide and up to 90 cm long. Stick the following instructions:

  1. Secure the edge of the tape on the left palm with a thumb.
  2. Get the end of the tape back and make the "eight" twice, stretching the ribbon between the middle and nameless fingers, then build the bow, told the knot in the middle.
  3. Remove the bow with hands, cut and treat the ends of the ribbon.
Magnificent Booth from Wide Ribbon
Magnificent Booth Ribbon: YouTube / CreativeClub

Thin tape bow

The bow of the ribbon thin and transparent is obtained by air and elegant. It will take:

  • Thin ribbon 2.5 cm wide and 1.3 m long;
  • Circle of dense tissue with a diameter of 2.5 cm;
  • Round elastic or hairpin;
  • Beads or other decorative elements.

This bow is done using a needle with a thread and glue step by step like this:

  1. Cut the tape into two parts - 30 and 100 cm.
  2. Fold the edges of the same part, place them with a match or lighter. Also treat another segment of the tape. It turned out two details.
  3. Put every item on the edge of the stitches of 5-7 mm and pull it out. On the large part in the center, leave a 1.5 cm ring, on a small one - 1 cm.
  4. Stick to a greater ring with an inside a piece of dense fabric. Later to it, attach a gum or hairpin.
  5. In the middle of the Big Ring, stick the one that is less.
  6. At the center attach beads or decoration.
Two pink lush bow
Thin tape volumetric bows: YouTube / Ola Ames DIY

How to make a bow of ribbon for a gift

Consider options how to fold the bow from the tape to decorate the gift box:

Floor lush bow

The easiest way to make such a bow on the fingers. Take a beautiful decorative tape with a width of 2.5 cm and a length of 3 m, as well as auxiliary tape of such a length, to have enough to attach a bow to the box. Do this:

  1. Hold the end of the tape with loose fingers on the palm.
  2. Mock the tape "eight" on the big and index fingers.
  3. Remove the blank from the fingers. In the middle, at the intersection of turns, make scissors shallow cuts on both sides.
  4. Take the bows auxiliary tape in these places and tighten the node.
  5. Now take turns on both sides, start straightening the loop, forming a spherical bow. Each loop pull out and scroll your finger from the center.

It remains auxiliary tape to tie a gift.

How to make a bow. Infographics
How to make a bow for a gift: nur.kz

Another way to tie a lush gift bow

It also takes a decorative tape with a width of 2.5 cm and up to 2 m long. Auxiliary items - a 20 × 11 cm rectangle and a narrow tape that secure the bow on the box. Step up so:

  1. Wash the tape with turns on the width cardboard and remove the motility.
  2. On both sides of the folded scissors made with scissors.
  3. Fold these cuts together and tie the bow in this place auxiliary tape or braid.

Further form a spherical bow as in the previous case.

Red Bow
Gift Bow: YouTube / DIY DIY from Irina Rembolovich

Exquisite decorative bow for a gift

It will take a dense tape or braid that keeps the shape well. The decoration consists of two parts: the top is a complex bow and the bottom - four loops of different lengths. Connect details with double-sided adhesive tape.

Tape or braid need to cut into segments of such a length:

  • for a bow - 10, 26 and 32 cm;
  • For loops - 20, 26, 32 and 39 cm.

Consistently glue them like this:

  1. Three strips for a bow Connect into separate rings. Two large rings glue still in the middle to get a bow. Then both bow fold on each other and glue. Third, small ring, glue from above.
  2. Four bands glue loops. Then all four loops connect and secure.
  3. At the place of connecting the loop on top of the glue bow.

It turned out an exquisite decor, which remained to fix on a gift box.

Gray bow on the box
Gift Bow: YouTube / Ola Ames DIY

Here are such simple ways to quickly make bows for gift decoration and hairstyles. According to these instructions, they will turn out even, durable, and their manufacture does not take much time.

Original Articles: https://www.nur.kz/fakty-i-layfhaki/1758232-kak-sdelat-bantik-iz-lenty-posagovo/

How easy and beautifully tie a bow of ribbon

Bow of tapes - accessory, invariably present around us not only during the solemn events, but also in ordinary life. There is a lot of different bows on sale, but with your own hands made of amazingly beautiful things will cost many times cheaper, and it will look original, not beaten.

The content of the article

Can you kill with crochet? Publish work on Kru4ok.ru.

Bow of tape: where applies

Mom girls know exactly that without a variety of diverse bows it is impossible to send a daughter even to kindergarten, not to mention the matinee or other festive action. And the most unusual, beautiful, bright accessory from the tapes should decorate the hair, girl's clothes on her birthday.

How easy and beautifully tie a bow of ribbon

The bow of the tape is also appropriate in the following situations:

  • For the manufacture of hairpins, rubber bands;
  • when finishing dresses, blouses;
  • For belt design;
  • When the gift is decorated, etc.

Depending on the purpose and idea, the bow can be of different sizes and species: flat or lush, simple or multi-layered, using finishing shoelaces, etc. The tape itself can be any - a motley, monophonic, with a textured surface, smooth, with finishing stripes or without.

What materials are used for the manufacture of bows

The tape does not necessarily apply a wide, elegant accessory also leaves the narrow strip, turning into the hands of the craftsmen into the womb flower. Materials are used as tape material:

  • atlas;
  • Natural or artificial silk;
  • Capron;
  • Nylon and other fabrics.

The chic bow can be made of polka dot fabric and even in a cell. A special place in the manufacture of decoration on the hair or for the design of gifts is occupied by the color of the ribbon. Before you decide on the dominant bowl of the bow, you should consider both the purpose of the event and the color of all the items of clothing, shoes, as well as other accessories.

Permissible in the manufacture of a bow from the tape a combination of several colors, and not only different tones of the main direction, but also contrasting colors.

From the courage and latitude of fancy, the craftsmen depends on how interesting, the exclusive bow will succeed.

Whatever technicians and tools, the materials did not use the master, making an accessory from the tape, the result will always be delightful in identity and uniqueness.

Bow of a tape of two colors, master - class!

Bow of a tape of two colors, master - class!

We need a tape of two colors width 2-2.5 cm and 60 cm long, clothespins, a pattern of cardboard and a needle with a thread.

Template as in the photo on the left:

Template as in the photo on the left:

We fold two ribbons with an invalid side to each other and a lighter we fall around the edges:

Bow of a tape of two colors, master - class!

We begin to fold the ribbon as in the photo and fasten the clothespins on the template:

Bow of a tape of two colors, master - class! Bow of a tape of two colors, master - class!

When the tape is decomposed and fixed, we flash the thread across the bow remove the tape from the template and collect it on the thread, straightening the bow:

It turns out such a bow, the middle time is copied to the thread several times and you can sew on clothes or glue for a gift:

Bow of a tape of two colors, master - class!

Little bow from the reps tape, master - class!

To create a bow, we will need a reps tape with a width of 1.5 and 0.5 cm, a length of 60-70 cm, a thread with a needle and a lighter.

Fold a loop from the tape, as shown in photo 1:

Little bow from the reps tape, master - class!

Fold the loop from the center of the top down to the base and secure the pin:

Free tips fold the cross on the cross and secure the needle.

Little bow from the reps tape, master - class!

The bow is essentially ready, now it needs to be filadied and strung.

Little bow from the reps tape, master - class!

The stitched place is intercepting the thin reps ribbon and tie a node from behind:

Little bow from the reps tape, master - class!

It turns out a beautiful bow, just do not forget to melt the tips tips on the lighter.

Little bow from the reps tape, master - class!

Rosette from satin ribbon, master class!

Here we were useful to the second pattern. We make a rose from the satin ribbon on the template, although you can do on your fingers.

2 cm width tape and a length of 80 cm to 2 m, depends on the number of petals and pomp future flower. Mix 11-15 times a tape on the template:

Rosette from satin ribbon, master class!

Remove from the tape template and make the node free ends:

Rosette from satin ribbon, master class!

Fend from above in turns every ring is right, then left at the same time turning the tape on the front side:

Rosette from satin ribbon, master class!

Total will get several petals, and leave the last ring in the middle of the flower:

Rosette from satin ribbon, master class!

Rose from satin ribbon is simple and bulky:

Rosette from satin ribbon, master class!

How to make a lush bow of satin ribbon

How to make a lush bow from satin ribbon:

The diameter of the finished bows is 14 cm. (If you want to reduce the size of the bows, boldly reduce all the stated dimensions by 2-3 cm.

We need:

  • Tape 50 mm width (5 cm) 6 segments of 14 cm
  • 25 mm width ribbon (2, 5 cm) 6 segments of 10.5 cm
  • Thin silver tape 3 mm about 6 segments of 15 cm and 6 segments of 8 cm
  • Circle of felt with a diameter of 5.5 cm
  • Heart or flower for the middle
  • Thread, needle, scissors, lighter
  • Adhesive gun or glue-moment transparent, or titanium glue
  • Elastic or crocodile for fastening.

An important rule! Ribbons Immediately after cutting, quit around the edges so that they do not fall !!!

Step-by-step master - class Look at the link

Volumetric Booth from Gift Tape For 3 Minutes

Volumetric Booth from Gift Tape For 3 Minutes

We will need:

  • Paper tape (any width, but more 1cm)
  • Thin paper tape (0.5 cm)
  • scissors

Step-by-step master - class Look at the link

Little Bow for Jewelry

Little Bow for Jewelry

Today I want to share with you the simplest way to tie a bow, for the manufacture of 1 bantas requires exactly 1 minute. America I certainly do not open, but I am sure someone my master class will simplify life and free some time on other important things. The master class is designed for beginner needlewomen.

To work, we need a dense tape with a width of 1.5 cm. And the tape cord in the main color (I have golden).

We pay your fingers the main ribbon flashes. Remove the loop, intercepting her fingers in the center. Then we make a double turn at exactly in the center of the future bow tape-cord.

Little bow of ribbon do it yourself

Cut the cord. I turn over the bow facial side up, cutting a ribbon forming beautiful tails. It remains only to straighten a bow. MK source

Simple and beautiful satin ribbon bow

Simple and beautiful satin ribbon bow

  1. Prepare scissors.
  2. For one bow, we will need two types of ribbons, I have a beige color (4.5 cm wide and 47 cm long) and white (5 cm wide, and 47 cm long). You can use one tape on both tiers.
  3. We also need a 0.6 cm tape segment with a length of 12 cm,
  4. Laman (my milestone has a height of 20 cm, and 10.5 cm width). The leaflers are smoothly divided into the center, in order to flash through our workpiece.
  5. Needle with thread.
  6. Glue to secure the middle (I use the polymer "dragon").
  7. Lighter for melting edge tapes.
  8. Mains for our product.

Here is our set of all necessary.

Step-by-step master class See by reference

Little Bow for Gift from Satin Ribbon

Little Bow for Gift from Satin Ribbon

For a bow, I used a satin ribbon, 40 cm. It is quite enough. On both sides, the edges have fallen a lighter and you can start tie.

Step-by-step instruction

Bow of satin and rep and ribbons

Bow of satin and rep and ribbons

I want to introduce you another master class on the manufacture of a bow of ribbons. This time we will decorate the clip-clamp. To work, you will need:

  1. 2.5 cm wide ribbon;
  2. Ribbon 1,5 cm wide;
  3. 1 cm width ribbon;
  4. Clip-clip Long 5 cm;
  5. threads;
  6. scissors;
  7. lighter;
  8. Glue or adhesive gun.

For the first layer of a bow, take 2 cuts of a wide tape with a length of 14 cm each and 2 segments of a narrow ribbon 14.5 cm length each. To the ends of the tapes do not flip, I melt them with a lighter.

Wizard-Class See by reference

Making a large satin ribbon bow

We will need a ribbon 3 cm wide and scissors.

Make out of the tape the first loop, as in photo 1:

In the left hand, make a similar loop:

Crossbet the loops from the ribbon and the top loop stretch through the hole between the hinges, so that the node touches:

Tighten the node, turn the bow so that the hinges are from above, and the long tips from the bottom.

Pulling in turn Free ends of the tape Adjust the loop of the bow: Make them more or less:

Bow ready. Now we will deal with free tips. Fold them in half and cut at an angle of 45 degrees:

If necessary, fall the tips with a lighter:

Video lesson how to properly tie a bow of tape for a gift

See how to properly tie the box with ribbon and tie a simple classic french bow.

Here should be booted video, wait or refresh the page.

How to make a magnificent bow of transparent tape

Here should be booted video, wait or refresh the page.

Magnificent gift bow from ribbon, easy way

Here should be booted video, wait or refresh the page.

Unusual gift bow from ribbons with their own hands

We will need a wide satin ribbon, double-sided flexible tape and scissors.

Here should be booted video, wait or refresh the page.

Добавить комментарий