How to make eternal linen for the furnace? - All you need to know about heating

Eternal fee with their own hands reviews.

How to make eternal linen for the furnace?How to make eternal linen for the furnace?

A new video appeared on the Internet, in which the "Eternal Pulling" was demonstrated.

It is truly a truly eternal due to the fact that it is not from the tree and in the stove does not burn. The eternal fee itself is made of durable metal, the inside of which is filled with water and it is desirable that this water is warm. Itself is not lit, as I said, but it falls into the stove with the rest of the wood, according to the creators of the "Eternal Polane" allows lanes from the tree to burn longer than twice that is, the savings of the material will be twice. The developers of the eternal Pullean believes that due to its retention of heat and by the release of the steam, the eternal tax will allow to save firewood and lay less than firewood in the "bourgeois".

Eternal Pool can be made with your own hands.

Let's take a closer on the drawn scheme:

Eternal Pulling is a metal construction that is posted on both ends with a special hole in which water is poured, a hole, as a rule, is made in the form of a crane to close it, the water so that the water is not pulled out of this hole. The most difficult thing will be a crane in the hole, and so nothing complicated. But as the author of this development approves from physical laws its development.

The author wrote that it was necessary to lay it on the left and right of the eternal fall, ordinary lamps. True, it is necessary to do it so that the filler's crane is next to the door of the furnace, so that it is possible to add water. It is necessary to take into account when constructing a crane, so that when opening the furnace it was convenient to get to it. But here there are also disadvantages, if you decide to pour water in a clip when it is in a hot furnace, you can easily burn on the oven or itself.

It makes sense to make eternal clay, if you live somewhere in the country and gas heating you do not have, in urban apartments there have been no heating on firewood, and civilized gas heating. The eternal Pulleted invented recently, there will be or such an invention further supplied to the stores for implementation is still unknown.

For heating, I use an ordinary stove, the firewood in which it burns very quickly, therefore, with intensive heat generation, its considerable part goes into the chimney. As a consequence, to maintain a normal temperature level, you have to load fuel constantly. To solve this problem, I began to apply "Eternal Pulling", which helps save 30-50 percent of firewood. Without it, I have one loading of the firebox goes in 1 hour 10 minutes, and with it for 30 minutes longer.

Materials for manufacture

To make the eternal Polysee need:

  • Pipe metallic thick-walled D76 mm, a normal scan length for the stove;
  • metal sheet for brewing tubes;
  • Nut M12;
  • bolt M12;
  • Corner steel 10x10 mm - 20 cm.

The process of making an eternal fall to save

I used a pipe with a diameter of 76 mm. Cropped with the length under the standard is fully covered, which lay in the stove. The diameter used affects the refueling capacity. If the combustion chamber is high, and you can download a lot of firewood into it, then the pipe must be used to use it. According to the manufacture there is nothing complicated. It is necessary to cut two circles from the sheet metal along the diameter of the pipe and hermetically brewed her ends. After that, cutting the steel corner, receiving 2 cuts of 10 cm. I will cook them to the pipe at its edges, having received stable legs.

Next, simply drilled the drill on a 12 mm hole on top of the tube. Attached to it a nut and welded, receiving a refueling neck. After that, it is possible to twist the bolt in it performing the role of the lid. A little twist welded to his head so that it could be twisted without a key. On the entire perimeter, with an interval of 4 cm made a number of holes with a drill by 3 mm. There are no criteria for the dimensions of the tube used, since it all depends on the parameters of the stove, and rather the amount of firewood that can be downloaded to it.

I want to pay attention to what you need to use thick metal so that it does not boost. Also, it is also impossible to make little holes, and even more so apply thin drills by 1 or 2 mm, since pair under pressure is not a joke. If, when testing is tested, a whistle gives a strong pressure when the steam exits, it means there are few holes, so it needs to be extruded urgently. After that, it will have to drill holes to a larger diameter. But it is not necessary to make them too large, since the ashes will fall inside, and it is uncomfortable to wash the brewed pipe.

Better more small holes than a few large.

How to use

To take advantage of the eternal floor, you need to unscrew the lid and pour water inside the pipe, fully filling it. I try to use almost boiling water so that the process began immediately.

After refueling, I close the bay neck with a bolt. Ethnicly put it on the bottom of the stove and lay it on the sides and on top of firewood. After this, I smelter the fire and tightly closing the stove.

Why it works

The use of the eternal Calus increases the duration and quality of the combustion of one boot of firewood. Fire and heat can hold up to 50 percent longer, which depends on the design of the stove. Personally, my burning is extended to 30 percent. My acquaintances with other parameters of the stove observes savings from 15 percent and above, which is explained by the inappropriate parameters of the dimensions of the most fully under their furnace.

This result is achieved due to the fact that the specific heat capacity of the water vapor is higher than that of the air. This is a physical fact that has long been proven. In the air, this indicator is 1 (kJ / (kg · k), and the pair comes to 2 (KJ / (kg · k). I also want to note that the eternal fee is not suitable for all types of wood stoves. It is ideally compatible with ordinary bourgearies with direct chimney.

If the brick oven has a channel chimney in the wall, then in certain cases there is a possibility of condensation of the unburned steam. If you wish to use the eternal floor with such a stove design, I advise you to inspect the surveillance hatches of the chimney for the appearance of sticky soot. If it is not, then it suits it and you can safely apply it.

Friends, we analyze anyone every day who and by what search queries falls on our site.

And we noticed that the word Alternatively covered with their own hands I scored a lot of requests. Accordingly, readers wanted to find this information on our website. It may be due to the fact that we have articles in which products from logs, stumps, sleep and think that this also applies to us.

We decided to explore and describe in this article, what is wonderfully complete, which will help save on heating and how to make it with your own hands, especially on the Internet there are many negative and positive feedback.

The Eternal Pluncher is shown in the diagram below.

This is not a log, but an ordinary metal pipe, brewed from two sides. The pipe made a hole that can be closed using the valve. Through this hole flooded water and fills the entire volume of the pipe. There are also several small holes along the entire length of the pipe. Accordingly, so that through these holes the water is not poured, the legs are made.

According to the inventor on video, this eternal Polyente is an endless source of savings on heating and will work for a long time.

It also says that the stove will work more efficiently.

How does all this work? Water poured into the pipe, it is preferably hot that the heating is faster, but it is also cold. You can insert a funnel into the hole so that the water is accurately falling into the hole. From hot water faster, the entire effect of the formation of a saturated pair begins.

Physics

  1. The combustion time of firewood increases significantly, for example, without perpetual, the burning lasts on average 1 hour 10 minutes, and with it - 1 hour and 40 minutes, that is, 40% longer. It turns out that for the heating of the house or room, it will take less firewood.
  2. The heat capacity of the steam is two times higher than the heat capacity of the surrounding air. This is indicated in the Handbook "Specific heat capacity of solids, liquids and gases".

    Specific heat capacity at constant pressure in air 1 kJ / kg * K, and in water vapor 2.14 kJ / kg * to at 100 ° C.

Everyone who at least times the stove, steam or burzhuyk trees, perfectly knows how quickly firewood is driving. Even today, many cottages have furnaces on solid fuel. In order to maintain a constant temperature, such stoves should be refilled regularly.

However, there is one tricky method that will force the lamps to burn by 30-50 percent longer, while giving as much heat.

Materials that will be needed for manufacture

In order to create "infinite" with your own hands, you must first prepare tools for work, as well as a metal sheet for brewing pipe ends, bolt M12, a steel mill 10x10 mm - 20 cm, the M12 nut, and the pipe metal thick-walled D76 mm. The latter should be chosen under the length of the usual, medium chuck for the oven. That's all right. If the necessary items are available, you can start the workflow. We do the following.

Manufacture

We take a pipe with a diameter of 76 mm and cut it under the length of the chumbach. If you have a large camera for combustion in the stove (and you can download a lot of firewood into it), then it is recommended to use the pipe as thick as possible. In the process of manufacturing the device there is nothing complicated. First, it is necessary to cut two circles from the cooked sheet metal along the diameter of the pipe and hermetically brew its ends. Sustainable legs should be accelerated.

After that, we make a filling hole, drill the hole to the top of the tube and welding the nut. Prehasting the bolt cooked on it and becomes a lid. It is recommended to weld a metal rod to the head so that it is possible to rotate it without using the key.

Eternal Pulled to save wood: myth or reality?

How to make eternal linen for the furnace?

Owners of country houses When heating them, they note that the wet material is burning longer, and the stove walls are heated stronger. As a result, the device "Eternal Pulling" appeared for artificial moistening of combustion products. The principle of operation of the device is extremely simple: water is poured into the tank, placed together with firewood in the furnace. As water is progress, evaporating, saturates the flue gases by steam. This increases the duration of burning and heat transfer. You can make the steam generator with your own hands on ready-made drawings and schemes.

Device and features

In a wood stove, in which there is no possibility to adjust the volume of air coming into combustion, the fuel is consumed too quickly. At the same time, the temperature of the exhaust gases and heat loss increases. Reduced burning intensity helps the water vapor entering this zone. The latter is formed in the steel tank (steam generator) - "Eternal Pole." Water poured into it before laying firewood into the furnace, they have on the bottom of the furnace.

For your information!

The use of the steam generator in a closed firebox is associated with the danger of the thermal explosion. During operation, it is necessary to follow the cleanliness of the surface, to clean the holes for the steam output in a timely manner.

Efficiency and savings

Railing a fire in nature or fire in the oven, you can pay attention to that wet firewood burns slower dry. It is explained by the fact that the heat of the combustion of the fuel is spent on heating and evaporation of water. The principle of operation found an application when heating a private house. The idea of ​​the device is to use water as a retarder to increase the combustion time of one fuel laying. In this case, firewood during combustion is partially spending thermal energy to receive steam.

Depending on the design of the furnace and the steam generator, you can get in%:

  • Increasing the combustion time - up to 50;
  • increasing heat transfer gas - up to 15;
  • Reducing the cost of firewood for heating - up to 30.

Operating principle

The steam generator consists of a metal pipe, hermetically brewed with ends, support legs, filling neck and holes in the top. The principle of work is to form a steam: heat from burning laminates is transmitted to water through the walls. The liquid boils, in the gaseous state it comes through the upper holes. Couple irrigate firewood, thereby reducing the intensity of burning. At the same time, it tolerates heat from burning coal to the heat transfer surfaces of the furnace. Sequence of application:

  1. Through the neck pour water into the pipe, close the cork.
  2. Place the steam generator on the grate grid.
  3. Locked firewood.
  4. Fighter fuel.

How to make it yourself

Due to the simple design and the absence of components of a complex form, a steam generator can even make a master without the experience of manufacturing metal products. From the instrument you will need:

  1. The welding machine (when it is not no, you can contact the nearest plumbing workshop).
  2. Manual drill or drilling machine.
  3. Corner grinding machine (Bulgarian).
  4. Twisted with a diameter of 4 and 12 mm.
  5. Measuring tools (ruler, roulette, caliper).

The main part of the steam generator is the case. It is desirable to make it desirable from the pipe with a thick wall (6-7 mm). Diameter and length are selected in the size of the furnace. Too large steam generators do not fit into the oven, and in small water will quickly evaporate. For the neck, it is necessary to prepare the nut and bolt M 12. From the ends of the pipe, two disks are welded with a thickness of 5-6 mm, which in diameter are equal to its outer size. The support legs make from any metal: segments of reinforcement, circle, corner, etc. The main thing - the steam generator should be stable to be placed in the furnace.

For your information!

Moisturizing is advisable to apply in simple metal stoves. The presence of long chimneys can lead to the formation of condensate, sticking the smallest sediments.

The manufacture is starting with the definition of the desired dimensions. To do this, you can use a wooden floor. It is placed in the furnace, assesses the remaining space for fuel. If the results are satisfactory, the steam generator is made in size. Assembly sequence:

  1. Cut a steel pipe.
  2. In the upper part, one hole is drilled with a diameter of 12 mm and several small (with an equal step).
  3. Cut from steel sheet two disks in the size of the pipe.
  4. Cut for support two corners with a length of 100 mm.
  5. Welcome to the ends of the pipe discs, to a larger hole - a nut, on the sides - legs.

The use of the "Eternal Plung" increases the combustion time of one fuel load, saving - firewood. However, the applied steam generator will be possible not in all furnaces - to evaluate the use of the device or its harm you can only be experienced.

A source: https://djdiplomat.ru/vechnoe-poleno-dlya-ekonomii-drovii-domalnost/

We make eternal tax and save on firewood up to 50%

A source: https://zen.yandex.ru/media/krrot/delaem-vechnoe-poleno-i-dekonomim-na-drovach-do-50--5de4d0d843fdc000b2bfa0d2.

Eternal covered with your own hands drawings

How to make eternal linen for the furnace?How to make eternal linen for the furnace?

Eternal covered with your own hands drawings

How to make eternal linen for the furnace?

Eternal covered with your own hands drawings

How to make eternal linen for the furnace?

Eternal covered with your own hands drawings

How to make eternal linen for the furnace?

A bunch of errors, technically critical! The most important of them: the diameter of the hole is indicated by the diameter and not R radius; Then the size of those who "no" everything turned out at least at the level "Well, something like that" and without any questions - the author's acceptable competence is needed in the topic covered!

Framing of Poland

Eternal fee with their own hands reviews.

How to make eternal linen for the furnace?How to make eternal linen for the furnace?

A new video appeared on the Internet, in which the "Eternal Pulling" was demonstrated.

It is truly a truly eternal due to the fact that it is not from the tree and in the stove does not burn. The eternal fee itself is made of durable metal, the inside of which is filled with water and it is desirable that this water is warm. Itself is not lit, as I said, but it falls into the stove with the rest of the wood, according to the creators of the "Eternal Polane" allows lanes from the tree to burn longer than twice that is, the savings of the material will be twice. The developers of the eternal Pullean believes that due to its retention of heat and by the release of the steam, the eternal tax will allow to save firewood and lay less than firewood in the "bourgeois".

Eternal Pool can be made with your own hands.

Let's take a closer on the drawn scheme:

Eternal Pulling is a metal construction that is posted on both ends with a special hole in which water is poured, a hole, as a rule, is made in the form of a crane to close it, the water so that the water is not pulled out of this hole. The most difficult thing will be a crane in the hole, and so nothing complicated. But as the author of this development approves from physical laws its development.

The author wrote that it was necessary to lay it on the left and right of the eternal fall, ordinary lamps. True, it is necessary to do it so that the filler's crane is next to the door of the furnace, so that it is possible to add water. It is necessary to take into account when constructing a crane, so that when opening the furnace it was convenient to get to it. But here there are also disadvantages, if you decide to pour water in a clip when it is in a hot furnace, you can easily burn on the oven or itself.

It makes sense to make eternal clay, if you live somewhere in the country and gas heating you do not have, in urban apartments there have been no heating on firewood, and civilized gas heating. The eternal Pulleted invented recently, there will be or such an invention further supplied to the stores for implementation is still unknown.

For heating, I use an ordinary stove, the firewood in which it burns very quickly, therefore, with intensive heat generation, its considerable part goes into the chimney. As a consequence, to maintain a normal temperature level, you have to load fuel constantly. To solve this problem, I began to apply "Eternal Pulling", which helps save 30-50 percent of firewood. Without it, I have one loading of the firebox goes in 1 hour 10 minutes, and with it for 30 minutes longer.

Materials for manufacture

To make the eternal Polysee need:

  • Pipe metallic thick-walled D76 mm, a normal scan length for the stove;
  • metal sheet for brewing tubes;
  • Nut M12;
  • bolt M12;
  • Corner steel 10x10 mm - 20 cm.

The process of making an eternal fall to save

I used a pipe with a diameter of 76 mm. Cropped with the length under the standard is fully covered, which lay in the stove. The diameter used affects the refueling capacity. If the combustion chamber is high, and you can download a lot of firewood into it, then the pipe must be used to use it. According to the manufacture there is nothing complicated. It is necessary to cut two circles from the sheet metal along the diameter of the pipe and hermetically brewed her ends. After that, cutting the steel corner, receiving 2 cuts of 10 cm. I will cook them to the pipe at its edges, having received stable legs.

Next, simply drilled the drill on a 12 mm hole on top of the tube. Attached to it a nut and welded, receiving a refueling neck. After that, it is possible to twist the bolt in it performing the role of the lid. A little twist welded to his head so that it could be twisted without a key. On the entire perimeter, with an interval of 4 cm made a number of holes with a drill by 3 mm. There are no criteria for the dimensions of the tube used, since it all depends on the parameters of the stove, and rather the amount of firewood that can be downloaded to it.

I want to pay attention to what you need to use thick metal so that it does not boost. Also, it is also impossible to make little holes, and even more so apply thin drills by 1 or 2 mm, since pair under pressure is not a joke. If, when testing is tested, a whistle gives a strong pressure when the steam exits, it means there are few holes, so it needs to be extruded urgently. After that, it will have to drill holes to a larger diameter. But it is not necessary to make them too large, since the ashes will fall inside, and it is uncomfortable to wash the brewed pipe.

Better more small holes than a few large.

How to use

To take advantage of the eternal floor, you need to unscrew the lid and pour water inside the pipe, fully filling it. I try to use almost boiling water so that the process began immediately.

After refueling, I close the bay neck with a bolt. Ethnicly put it on the bottom of the stove and lay it on the sides and on top of firewood. After this, I smelter the fire and tightly closing the stove.

Why it works

The use of the eternal Calus increases the duration and quality of the combustion of one boot of firewood. Fire and heat can hold up to 50 percent longer, which depends on the design of the stove. Personally, my burning is extended to 30 percent. My acquaintances with other parameters of the stove observes savings from 15 percent and above, which is explained by the inappropriate parameters of the dimensions of the most fully under their furnace.

This result is achieved due to the fact that the specific heat capacity of the water vapor is higher than that of the air. This is a physical fact that has long been proven. In the air, this indicator is 1 (kJ / (kg · k), and the pair comes to 2 (KJ / (kg · k). I also want to note that the eternal fee is not suitable for all types of wood stoves. It is ideally compatible with ordinary bourgearies with direct chimney.

If the brick oven has a channel chimney in the wall, then in certain cases there is a possibility of condensation of the unburned steam. If you wish to use the eternal floor with such a stove design, I advise you to inspect the surveillance hatches of the chimney for the appearance of sticky soot. If it is not, then it suits it and you can safely apply it.

Friends, we analyze anyone every day who and by what search queries falls on our site.

And we noticed that the word Alternatively covered with their own hands I scored a lot of requests. Accordingly, readers wanted to find this information on our website. It may be due to the fact that we have articles in which products from logs, stumps, sleep and think that this also applies to us.

We decided to explore and describe in this article, what is wonderfully complete, which will help save on heating and how to make it with your own hands, especially on the Internet there are many negative and positive feedback.

The Eternal Pluncher is shown in the diagram below.

This is not a log, but an ordinary metal pipe, brewed from two sides. The pipe made a hole that can be closed using the valve. Through this hole flooded water and fills the entire volume of the pipe. There are also several small holes along the entire length of the pipe. Accordingly, so that through these holes the water is not poured, the legs are made.

According to the inventor on video, this eternal Polyente is an endless source of savings on heating and will work for a long time.

It also says that the stove will work more efficiently.

How does all this work? Water poured into the pipe, it is preferably hot that the heating is faster, but it is also cold. You can insert a funnel into the hole so that the water is accurately falling into the hole. From hot water faster, the entire effect of the formation of a saturated pair begins.

Physics

  1. The combustion time of firewood increases significantly, for example, without perpetual, the burning lasts on average 1 hour 10 minutes, and with it - 1 hour and 40 minutes, that is, 40% longer. It turns out that for the heating of the house or room, it will take less firewood.
  2. The heat capacity of the steam is two times higher than the heat capacity of the surrounding air. This is indicated in the Handbook "Specific heat capacity of solids, liquids and gases".

    Specific heat capacity at constant pressure in air 1 kJ / kg * K, and in water vapor 2.14 kJ / kg * to at 100 ° C.

Everyone who at least times the stove, steam or burzhuyk trees, perfectly knows how quickly firewood is driving. Even today, many cottages have furnaces on solid fuel. In order to maintain a constant temperature, such stoves should be refilled regularly.

However, there is one tricky method that will force the lamps to burn by 30-50 percent longer, while giving as much heat.

Materials that will be needed for manufacture

In order to create "infinite" with your own hands, you must first prepare tools for work, as well as a metal sheet for brewing pipe ends, bolt M12, a steel mill 10x10 mm - 20 cm, the M12 nut, and the pipe metal thick-walled D76 mm. The latter should be chosen under the length of the usual, medium chuck for the oven. That's all right. If the necessary items are available, you can start the workflow. We do the following.

Manufacture

We take a pipe with a diameter of 76 mm and cut it under the length of the chumbach. If you have a large camera for combustion in the stove (and you can download a lot of firewood into it), then it is recommended to use the pipe as thick as possible. In the process of manufacturing the device there is nothing complicated. First, it is necessary to cut two circles from the cooked sheet metal along the diameter of the pipe and hermetically brew its ends. Sustainable legs should be accelerated.

After that, we make a filling hole, drill the hole to the top of the tube and welding the nut. Prehasting the bolt cooked on it and becomes a lid. It is recommended to weld a metal rod to the head so that it is possible to rotate it without using the key.

Eternal Pulled to save wood: myth or reality?

How to make eternal linen for the furnace?

Owners of country houses When heating them, they note that the wet material is burning longer, and the stove walls are heated stronger. As a result, the device "Eternal Pulling" appeared for artificial moistening of combustion products. The principle of operation of the device is extremely simple: water is poured into the tank, placed together with firewood in the furnace. As water is progress, evaporating, saturates the flue gases by steam. This increases the duration of burning and heat transfer. You can make the steam generator with your own hands on ready-made drawings and schemes.

Device and features

In a wood stove, in which there is no possibility to adjust the volume of air coming into combustion, the fuel is consumed too quickly. At the same time, the temperature of the exhaust gases and heat loss increases. Reduced burning intensity helps the water vapor entering this zone. The latter is formed in the steel tank (steam generator) - "Eternal Pole." Water poured into it before laying firewood into the furnace, they have on the bottom of the furnace.

For your information!

The use of the steam generator in a closed firebox is associated with the danger of the thermal explosion. During operation, it is necessary to follow the cleanliness of the surface, to clean the holes for the steam output in a timely manner.

Efficiency and savings

Railing a fire in nature or fire in the oven, you can pay attention to that wet firewood burns slower dry. It is explained by the fact that the heat of the combustion of the fuel is spent on heating and evaporation of water. The principle of operation found an application when heating a private house. The idea of ​​the device is to use water as a retarder to increase the combustion time of one fuel laying. In this case, firewood during combustion is partially spending thermal energy to receive steam.

Depending on the design of the furnace and the steam generator, you can get in%:

  • Increasing the combustion time - up to 50;
  • increasing heat transfer gas - up to 15;
  • Reducing the cost of firewood for heating - up to 30.

Operating principle

The steam generator consists of a metal pipe, hermetically brewed with ends, support legs, filling neck and holes in the top. The principle of work is to form a steam: heat from burning laminates is transmitted to water through the walls. The liquid boils, in the gaseous state it comes through the upper holes. Couple irrigate firewood, thereby reducing the intensity of burning. At the same time, it tolerates heat from burning coal to the heat transfer surfaces of the furnace. Sequence of application:

  1. Through the neck pour water into the pipe, close the cork.
  2. Place the steam generator on the grate grid.
  3. Locked firewood.
  4. Fighter fuel.

How to make it yourself

Due to the simple design and the absence of components of a complex form, a steam generator can even make a master without the experience of manufacturing metal products. From the instrument you will need:

  1. The welding machine (when it is not no, you can contact the nearest plumbing workshop).
  2. Manual drill or drilling machine.
  3. Corner grinding machine (Bulgarian).
  4. Twisted with a diameter of 4 and 12 mm.
  5. Measuring tools (ruler, roulette, caliper).

The main part of the steam generator is the case. It is desirable to make it desirable from the pipe with a thick wall (6-7 mm). Diameter and length are selected in the size of the furnace. Too large steam generators do not fit into the oven, and in small water will quickly evaporate. For the neck, it is necessary to prepare the nut and bolt M 12. From the ends of the pipe, two disks are welded with a thickness of 5-6 mm, which in diameter are equal to its outer size. The support legs make from any metal: segments of reinforcement, circle, corner, etc. The main thing - the steam generator should be stable to be placed in the furnace.

For your information!

Moisturizing is advisable to apply in simple metal stoves. The presence of long chimneys can lead to the formation of condensate, sticking the smallest sediments.

The manufacture is starting with the definition of the desired dimensions. To do this, you can use a wooden floor. It is placed in the furnace, assesses the remaining space for fuel. If the results are satisfactory, the steam generator is made in size. Assembly sequence:

  1. Cut a steel pipe.
  2. In the upper part, one hole is drilled with a diameter of 12 mm and several small (with an equal step).
  3. Cut from steel sheet two disks in the size of the pipe.
  4. Cut for support two corners with a length of 100 mm.
  5. Welcome to the ends of the pipe discs, to a larger hole - a nut, on the sides - legs.

The use of the "Eternal Plung" increases the combustion time of one fuel load, saving - firewood. However, the applied steam generator will be possible not in all furnaces - to evaluate the use of the device or its harm you can only be experienced.

A source: https://djdiplomat.ru/vechnoe-poleno-dlya-ekonomii-drovii-domalnost/

We make eternal tax and save on firewood up to 50%

A source: https://zen.yandex.ru/media/krrot/delaem-vechnoe-poleno-i-dekonomim-na-drovach-do-50--5de4d0d843fdc000b2bfa0d2.

Eternal covered with your own hands drawings

How to make eternal linen for the furnace?How to make eternal linen for the furnace?

Eternal covered with your own hands drawings

How to make eternal linen for the furnace?

A bunch of errors, technically critical! The most important of them: the diameter of the hole is indicated by the diameter and not R radius; Then the size of those who "no" everything turned out at least at the level "Well, something like that" and without any questions - the author's acceptable competence is needed in the topic covered!

Framing of Poland

Framing of Poland

How many people in the country are smart, from which straight sprinkles, and can not do an elementary car. Not so bad when smart is clever, but when the fool is bad! What car did you still have done? From the chimney, the high pressure fan of running air in water tanks as in the compressor in the aquarium in the attic everything heat will remain in water and the circulation pump will provide heat radiators. Heat engineer home-grown!

Friends, we analyze anyone every day who and by what search queries falls on our site. Accordingly, readers wanted to find this information on our website.

Bourgehogok quickly cools, because the pipe is straight and everything flies with a whistle. The thrust, his mother, and imagined do not cry, catch it.

The answer is simple, as three rubles, heat should be accumulated. The bourgeitogo look tightly with bricks, the more the better, even part of the pipe. Cavities fall asleep by sand benches and tamper.

Firewood will fight, iron cool, and the bricks will give heat all night. The principle of the stove, nothing new. But you will sleep all night in warmth.

At exactly, Mil Man! Return to school at physics lessons, so as not to confuse the heat capacity. It is "POLANE" gives you the opposite effect - the heat flies in the pipe with a decrease in the temperature of the furnace and the inner portion of the chimney.

Definitely - the Council is harmful, and the design gives the effect of reverse statements of the author. Yerundu came up with himself. Garbage on lean oil. From the holes in this lip, there will be steam that revenge gaseous combustion products will fly into the pipe.

It is clear that the only effect of this eternal is full - it takes place in the furnace and on the full loading of the stove will take less than firewood. With the same success, it could be put in a firebox, such as a brick or golly stones. Duc forth with raw wood. Total business. Really nonsense is complete, Grigory correctly noticed about the moistening of fuel by water ferry and, as a result, reducing the speed of their combustion. Due to the water vapor, you decrease the temperature in the furnace therefore the fuel is not completely combined, and unburned flue gases fly into the pipe and seated its soot.

Read about the kuznetsov furnaces and there is a line of brick boilers with water heat exchangers - it will be more aware, there will be a water heat exchanger on the contrary to accommodate the furnace in a separate cap, so as not to lower the temperature in the burning kernel, and you still water water.

And then the metallic chimney for the season melts, for the hot condensate plus sulfur compounds, and if the brick chimney, then the outer part of the pipe will absorb water, then it will freeze and starts the plaster and brick to crumble inside nonsense, I use a confusion. People are specially dried firewood, and this kill moisturizes the militant dry and put the raw lamps, they are burning for a long time, only the heat from them, for a brick oven in the house, raw firewood is bad, but it will be fine for the burzhuyki.

Eternal Polyse: Refinement and Testing

Eternal Polyse: Refinement and Testing

There is such a topic. Roller on the Internet. The version is described why the steam supply in the firebox allows you to increase the burning time of firewood.

As I understood, the essence is as follows: the paved pairs can be from the "eternal Pullen" passing through the hot, burning firewood, in fact through carbon, decompose on hydrogen and oxygen.

I am not strong in chemistry. Then hydrogen burns. This is an extra fuel in the stove. Need a temperature of degrees, and so everything is true.

If you just put in the oven "A jar with holes" and pour water in it - the benefit of the truth will be not enough: the water will take heat to evaporation, and the raw, not overheated couples will just fly into the pipe. The benefits of such a device is doubtful. But - if there is a single shell of thick gland around the standard "eternal fall" - pairs will overheat between the walls and participate in the combustion process. Since I have a vertical boiler, I have done a vertical, from what was found in the farm at hand.

What makes you think that some additional fuel takes? Simply, what is, burning slower and with big losses.

How to make eternal fee. Eternal Pulling to save on firewood

How to make eternal fee. Eternal Pulling to save on firewood

It is t. The more the steam is supplied - the greater its content in the gas mixture and the less oxygen in it. Performs worse, with a gain of heat loss and different other "side", but performs - firewood when they are cooled with water steam and burning, "suddenly" are burning worse and longer.

That's right, carbon is lit in oxygen, and here hydrogen in the process of thermaryidal synthesis, turns into helium. Carbon burns in oxygen, say ??? Yes, you "Chemist" However, I wrote above. The temperature is needed much less, because there is no decay of water, but a carbon response. Dear man in the street, on the Internet there are many videos in which different miracles show.

That is why it is recommended to have your head on the shoulders. The decay of the pair into hydrogen and oxygen followed by the "burning" of hydrogen - just one of the wonders.

Materials that will be needed for manufacture

Materials that will be needed for manufacture

Water is simply so oxygen and hydrogen disintegrates. On the rupture of the bonds of the water molecule, you need to spend energy and considerable. Hydrogen, burning in oxygen, forms feel like an eternal engine smell?

As L. said or two back the garage, the garage of the Father, who I also use, got a stove. One problem, the stove is not a completely successful design, so the consumption of firewood leaves much to be desired. Fortunately, the stove went for free, as this deficiency was compensated. It is even not even in the woods themselves, but in their storage, t.

And what do we know about eternal engines since school? Comrade just did not fully understand.

Eternal Pulling - Myth or Reality?

Owners of country houses When heating them, they note that the wet material is burning longer, and the stove walls are heated stronger. As a result, the device "Eternal Pulling" appeared for artificial moistening of combustion products. The principle of operation of the device is extremely simple: water is poured into the tank, placed together with firewood in the furnace. As water is progress, evaporating, saturates the flue gases by steam. This increases the duration of burning and heat transfer. You can make the steam generator with your own hands on ready-made drawings and schemes.

Device and features

In a wood stove, in which there is no possibility to adjust the volume of air coming into combustion, the fuel is consumed too quickly. At the same time, the temperature of the exhaust gases and heat loss increases. Reduced burning intensity helps the water vapor entering this zone. The latter is formed in the steel tank (steam generator) - "Eternal Pole." Water poured into it before laying firewood into the furnace, they have on the bottom of the furnace.

For your information!

The use of the steam generator in a closed firebox is associated with the danger of the thermal explosion. During operation, it is necessary to follow the cleanliness of the surface, to clean the holes for the steam output in a timely manner.

Efficiency and savings

Railing a fire in nature or fire in the oven, you can pay attention to that wet firewood burns slower dry. It is explained by the fact that the heat of the combustion of the fuel is spent on heating and evaporation of water. The principle of operation found an application when heating a private house. The idea of ​​the device is to use water as a retarder to increase the combustion time of one fuel laying. In this case, firewood during combustion is partially spending thermal energy to receive steam.

Depending on the design of the furnace and the steam generator, you can get in%:

  • Increasing the combustion time - up to 50;
  • increasing heat transfer gas - up to 15;
  • Reducing the cost of firewood for heating - up to 30.

Operating principle

The steam generator consists of a metal pipe, hermetically brewed with ends, support legs, filling neck and holes in the top. The principle of work is to form a steam: heat from burning laminates is transmitted to water through the walls. The liquid boils, in the gaseous state it comes through the upper holes. Couple irrigate firewood, thereby reducing the intensity of burning. At the same time, it tolerates heat from burning coal to the heat transfer surfaces of the furnace. Sequence of application:

  1. Through the neck pour water into the pipe, close the cork.
  2. Place the steam generator on the grate grid.
  3. Locked firewood.
  4. Fighter fuel.

How to make it yourself

Due to the simple design and the absence of components of a complex form, a steam generator can even make a master without the experience of manufacturing metal products. From the instrument you will need:

  1. The welding machine (when it is not no, you can contact the nearest plumbing workshop).
  2. Manual drill or drilling machine.
  3. Corner grinding machine (Bulgarian).
  4. Twisted with a diameter of 4 and 12 mm.
  5. Measuring tools (ruler, roulette, caliper).

The main part of the steam generator is the case. It is desirable to make it desirable from the pipe with a thick wall (6-7 mm). Diameter and length are selected in the size of the furnace. Too large steam generators do not fit into the oven, and in small water will quickly evaporate. For the neck, it is necessary to prepare the nut and bolt M 12. From the ends of the pipe, two disks are welded with a thickness of 5-6 mm, which in diameter are equal to its outer size. The support legs make from any metal: segments of reinforcement, circle, corner, etc. The main thing - the steam generator should be stable to be placed in the furnace.

For your information!

Moisturizing is advisable to apply in simple metal stoves. The presence of long chimneys can lead to the formation of condensate, sticking the smallest sediments.

The manufacture is starting with the definition of the desired dimensions. To do this, you can use a wooden floor. It is placed in the furnace, assesses the remaining space for fuel. If the results are satisfactory, the steam generator is made in size. Assembly sequence:

  1. Cut a steel pipe.
  2. In the upper part, one hole is drilled with a diameter of 12 mm and several small (with an equal step).
  3. Cut from steel sheet two disks in the size of the pipe.
  4. Cut for support two corners with a length of 100 mm.
  5. Welcome to the ends of the pipe discs, to a larger hole - a nut, on the sides - legs.

The use of the "Eternal Plung" increases the combustion time of one fuel load, saving - firewood. However, the applied steam generator will be possible not in all furnaces - to evaluate the use of the device or its harm you can only be experienced. Read other materials in the heading:

Eternal Pulling to save on firewood

For heating, I use an ordinary stove, the firewood in which it burns very quickly, therefore, with intensive heat generation, its considerable part goes into the chimney. As a consequence, to maintain a normal temperature level, you have to load fuel constantly. To solve this problem, I began to apply "Eternal Pulling", which helps save 30-50 percent of firewood. Without it, I have one loading of the firebox goes in 1 hour 10 minutes, and with it for 30 minutes longer.

Materials for manufacture

To make the eternal Polysee need:
  • Pipe metallic thick-walled D76 mm, a normal scan length for the stove;
  • metal sheet for brewing tubes;
  • Nut M12;
  • bolt M12;
  • Corner steel 10x10 mm - 20 cm.

The process of making an eternal fall to save

I used a pipe with a diameter of 76 mm. Cropped with the length under the standard is fully covered, which lay in the stove. The diameter used affects the refueling capacity. If the combustion chamber is high, and it can be downloaded a lot of firewood into it, then the pipe must be used to use.

Eternal Pulling to save on firewood

There is nothing complicated for the manufacture. It is necessary to cut two circles from the sheet metal along the diameter of the pipe and hermetically brewed her ends. After that, cutting the steel corner, receiving 2 cuts of 10 cm. I will cook them to the pipe at its edges, having received stable legs. Next, simply drilled the drill on a 12 mm hole on top of the tube. Attached to it a nut and welded, receiving a refueling neck. After that, it is possible to twist the bolt in it performing the role of the lid. A little twist welded to his head so that it could be twisted without a key. Around the entire perimeter, with an interval of 4 cm made a series of holes with a 3 mm drill.

Eternal Pulling to save on firewood

There are no strict criteria for the dimensions of the applied pipe, since it all depends on the parameters of the stove, or rather the amount of firewood that can be downloaded to it. I want to pay attention to what you need to use thick metal so that it does not boost. Also, it is also impossible to make little holes, and even more so apply thin drills by 1 or 2 mm, since pair under pressure is not a joke. If, when testing is tested, a whistle gives a strong pressure when the steam exits, it means there are few holes, so it needs to be extruded urgently. After that, it will have to drill holes to a larger diameter. But it is not necessary to make them too large, since the ashes will fall inside, and it is uncomfortable to wash the brewed pipe. Better more small holes than a few large.

How to use

To take advantage of the eternal floor, you need to unscrew the lid and pour water inside the pipe, fully filling it. I try to use almost boiling water so that the process began immediately.

Eternal Pulling to save on firewoodEternal Pulling to save on firewood

After refueling, I close the bolt the throat.

Eternal Pulling to save on firewood

Eternal fenders put on the bottom of the stove and lay it on the sides and on top of firewood.

Eternal Pulling to save on firewood

After that, I will grow fire and close the stove tightly.

Eternal Pulling to save on firewoodEternal Pulling to save on firewood

Why it works

The use of the eternal Calus increases the duration and quality of the combustion of one boot of firewood. Fire and heat can hold up to 50 percent longer, which depends on the design of the stove. Personally, my burning is extended to 30 percent. My acquaintances with other parameters of the stove observes savings from 15 percent and above, which is explained by the inappropriate parameters of the dimensions of the most fully under their furnace.

Eternal Pulling to save on firewood

This result is achieved due to the fact that the specific heat capacity of the water vapor is higher than that of the air. This is a physical fact that has long been proven. In the air, this indicator is 1 (kJ / (kg · k), and the pair comes to 2 (KJ / (kg · k). I also want to note that the eternal fee is not suitable for all types of wood stoves. It is ideally compatible with ordinary bourgearies with direct chimney. If the brick oven has a channel chimney in the wall, then in certain cases there is a possibility of condensation of the unburned steam. If you wish to use the eternal floor with such a stove design, I advise you to inspect the surveillance hatches of the chimney for the appearance of sticky soot. If it is not, then it suits it and you can safely apply it.

Eternal Pulling to save on firewood

Watch the video

If you have to use the most ordinary wood cutting oven as heating in the country or in any other place, then you probably know that the fuel in it goes very quickly. Most of the heat released during intensive working is simply disappeared into the pipe. Because of this, it is necessary to constantly throw the firewood into the stove to maintain a comfortable air temperature. To solve this problem, it is not possible to use firewood, but an eternal tax, which will save up to 50% of the funds that go to heating.

We make eternal covered with your own hands

With so full, you will undoubtedly be able to save firewood. Judge yourself, without eternal, one loading in the stove is roasted for an hour, and with him for two.

Materials for manufacture

To make the eternal Pool you need:

  • Metal tube thick-walled with a diameter of 76 mm. It should be the same length as firewood for the stove;
  • Metal sheet so that you can boil the pipe along the edges;
  • Nut M 12;
  • bolt m 12;
  • A corner of steel 10 by 10 mm - 20 cm.

Step 1

Photo: YouTU.be/sy_rl4tkn_g.
Photo: YouTU.be/sy_rl4tkn_g.

For the manufacture of the Eternal Pull, you will need a pipe with a diameter of seventy-six months. Adjust the length under your stove. Diameter affects the volume of refueling. If there is a lot of firewood in your stove, the pipe diameter also choose more.

Make the eternal is not difficult to do with your own hands. To do this, take a metal sheet and cut two mug from it, the diameter of which must match the diameter of the pipe, and make the edge. Then, from the steel corner, take two segments to the petition of centimeters. We weld them in the pipe. So you will have stable legs.

Then you need to make a hole in the pipe, for this use the drill. To make a refueling neck, attach a nut to it and breed it. Now it will be possible to screw the bolt, which will be a lid.

So that there was an opportunity to unscrew the bolt without a key, you can spend a small twist to it. On the perimeter of the pipe at a distance of four centimeters from each other. Make holes in three millimeters with a diameter with a drill.

Photo: YouTU.be/sy_rl4tkn_g.
Photo: YouTU.be/sy_rl4tkn_g.

Eternal fee will save the cost of firewood, because now they will need them twice as fewer.

Tip!

For the manufacture of an eternal is full, use only thick-walled pipes, otherwise it will quickly procee and have to do a new one.

Do not make too few holes. It will also be a mistake to use very thin drills, for example, one or two millimeters. Couples under pressure may not find output and exploded. Therefore, if your fellow in the furnace in the process of operation makes a characteristic whistle, then urgently remove it and make more holes or expand them.

But, too large holes are also not suitable. They will fall ashes, and wash the pipe is extremely disobedient from both sides. Then it is better to make a lot of small holes than a few big.

Step 2.

Photo: YouTU.be/sy_rl4tkn_g.
Photo: YouTU.be/sy_rl4tkn_g.

Now ready to be used. To do this, unscrew the lid and fill with water. If you want the process begins as quickly as possible, pour into the floor with boiling water.

Step 4.

Photo: YouTU.be/sy_rl4tkn_g.
Photo: YouTU.be/sy_rl4tkn_g.

Boiling water pour carefully, so as not to burn your hands. It is suitable for an awake watering can.

Step 5.

Photo: YouTU.be/sy_rl4tkn_g.
Photo: YouTU.be/sy_rl4tkn_g.

When the eternal fee is filled with water, tighten it with a bolt.

Step 6.

Photo: YouTU.be/sy_rl4tkn_g.
Photo: YouTU.be/sy_rl4tkn_g.

Put the eternal falling on the bottom of the stove, and lay out ordinary firewood on the sides on the sides.

Step 7.

Photo: YouTU.be/sy_rl4tkn_g.
Photo: YouTU.be/sy_rl4tkn_g.

Now just incite the fire with your usual way and close the stove damper tightly.

Photo: YouTU.be/sy_rl4tkn_g.
Photo: YouTU.be/sy_rl4tkn_g.

Once the water begins to turn into pairs, it will be fully executed.

How it works

Alternatively, it allows to reduce firewood patterns almost half. It all depends on what kind of stove has a design. Most often, the figure of savings reaches thirty percent, but sometimes fifty.

Photo: YouTU.be/sy_rl4tkn_g.
Photo: YouTU.be/sy_rl4tkn_g.

The specific heat capacity of the steam is greater than the air. If the air reaches one kJ, the pair is two.

It must be said that it is not suitable for all the stoves that work on firewood. The eternal is fully suitable for bourgearies with direct chimney. But if you have a brick stove with a channel chimney, which is made in the wall, then problems may arise in the form of condensate from the unburned steam. In this case, it is necessary to inspect the revision hatches of the chimney and make sure that there is no sticky of soot. If it is absent, the use of the eternal is fully permissible.

Photo: YouTU.be/sy_rl4tkn_g.
Photo: YouTU.be/sy_rl4tkn_g.

If you do everything according to the instructions, you will definitely get the eternal tax.

If you like our article, put like 👍

✔️ Subscribe to the site not to miss anything interesting! ⚡

More photos and video confants on the site https://krrot.net.

Friends, we analyze anyone every day who and by what search queries falls on our site. And we noticed that the word Alternatively covered with their own hands I scored a lot of requests. Accordingly, readers wanted to find this information on our website. It may be due to the fact that we have articles in which products from logs, stumps, sleep and think that this also applies to us.

Eternal Polyente

We decided to explore and describe in this article, what is wonderfully complete, which will help save on heating and how to make it with your own hands, especially on the Internet there are many negative and positive feedback.

The device of the eternal is shown in the diagram below. [Flat_ab id = "3"]

Drawing of the eternal Poland
Drawing of the eternal Poland

This is not a log, but an ordinary metal pipe, brewed from two sides. The pipe made a hole that can be closed using the valve. Through this hole flooded water and fills the entire volume of the pipe. There are also several small holes along the entire length of the pipe. Accordingly, so that through these holes the water is not poured, the legs are made.

According to the inventor on video, this eternal Polyente is an endless source of savings on heating and will work for a long time.

It also says that the stove will work more efficiently.

How does all this work? Water poured into the pipe, it is preferably hot that the heating is faster, but it is also cold. You can insert a funnel into the hole so that the water is accurately falling into the hole. From hot water faster, the entire effect of the formation of a saturated pair begins.

Physics

The author describes that two physical principles are used:

  1. The combustion time of firewood increases significantly, for example, without perpetual, the burning lasts on average 1 hour 10 minutes, and with it - 1 hour and 40 minutes, that is, 40% longer. It turns out that for the heating of the house or room, it will take less firewood.
  2. The heat capacity of the steam is two times higher than the heat capacity of the surrounding air. This is indicated in the Handbook "Specific heat capacity of solids, liquids and gases". Specific heat capacity at constant pressure in air 1 kJ / kg * K, and in water vapor 2.14 kJ / kg * to at 100 ° C.

After poured water, cover the hole with a plug and install the eternal falling on the bottom of the stove. On the left, on the right and above the usual lamps are put, the extracts are put on and set on all this.

After some time, water boils, steam is formed. Then the air and steam are mixed inside the stove and the mixture is formed, the heat capacity of which is almost twice as much as in conventional air.

Check video: Eternal Polyse - Savings on heating up to 50%

[Flat_ab id = "4"]

As a result, is it a myth or reality?

What can we say about it? All this is certainly not true, no one has canceled physics laws and the law of energy conservation still exists. Accordingly, it is necessary to spend extra energy in one place in one place in the other. It is also always necessary to ensure that the holes are always open differently can occur hydrate and turn the entire fuel.

The tip is only one - a competently folded stove and fuel will save and warm will be warm. But in order to do this, you need an experienced rustic Lake, who can determine the volume of the house and build a furnace of the required dimension.

Добавить комментарий