Chinese lantern with their own hands - Make a heavenly flashlight from girlfriend quickly

To date, the favorite occupation of children and adults is the launch of glowing lanterns in the sky, which called Chinese, hand-made. Walking down the fiery balls cause an unprecedented delight. Watching the fascinating spectacle can be infinity.

In fact, find information how to make a Chinese flashlight with your own hands, not difficult. On the Internet there are many videos from experienced masters, which in all details will explain the manufacturing process. It is important to understand that such a well-known fun requires compliance with the rules of security, so as not to cause harm to others. Suite crafts in the Asian style can be decorate the room or an open veranda in a country house or in the country. Showing creativity, you can make a night light or a table lamp, for which the design is enough to equip the LED. Most often paper products are used.

The emergence of the idea

The country of creating such original items speaks their name. For the first time, made of paper, they are mentioned in ancient handwritten texts about Zhoughe Lian's military campaigns. The general famous for his ingenuity inspired fear of opponents with a call to help the Divine Forces. With this purpose, he applied a bag of paper and oil lamp in battle. The cloud launched into the sky convincingly testified to the patronage of the higher forces.

Such a fiction that has already enjoyed 300 years before the new era, also served to transmit signals between the military units. It is possible that the products intended for flights replaced religious rituals. In 2005, an unusual discovery was penetrated into Europe, the demand for lanterns in which was truly massive. It happened after the 2004 earthquake in the Indian Ocean. In memory of those killed in this tragedy in Thailand, an incredible number of light, lanterns radiating around them, was released into the sky. The captured photo of the event subsequently won the prize of the World Press Photo. Since then, such a colorful action has spread in European states.

Device

To fulfill their hands of the Chinese paper flashlight, you will need pre-harvested:

  • Bamboo frame.
  • Fissure burner installed on fine wire.
  • Dome, absorbed the non-combustible composition of rice paper.

Choose as desired - in the form of a ball or cylinder. They take off by analogy with balloons. Once the brothers Mongolfier was filled with a smoking shell substance, overcoming kilometers in the air. The principle of heated ozone, becoming easier due to the decline in density. They are driven by the difference between air density inside and outside. In this regard, there is a recommendation for lanterns - choose the dark time without clouds. On average, their flight continues until 20 minutes.

Launch restrictions in the city

If it is properly not to ensure security, lantern starts can lead to unpleasant consequences, such as:

  • Forest fire.
  • Failure of power plants.
  • Obtaining animal injuries.

Due to the cause of damage from a fascinating event, prohibitions are introduced. Russia also has appropriate regulations. According to the adopted law, the planning of the mass launch of Chinese lanterns involves obtaining permission from institutions responsible for moving in airspace.

Launches are carried out only in open areas away from residential arrays with the ability to control the fall site. It is raised to apply such structures with strong wind.

Materials

To make Chinese flying lanterns with their own hands, you should be in advance:

  • Corrugated paper or cardboard.
  • Scissors for performing a template.
  • PVA glue or bilateral scotch.
  • Needle with thread.
  • Yarn for brushes.

You may also need: beads, paints, sequins and beads. For a functioning flashlight, mandatory components will be: a LED lamp and a working mechanism.

Actions

There will be no effort and time to make a lot of time.

  • The cut band of 30x50 cm is folded.
  • It is divided by 1 cm. For uniformity.
  • The resulting model is spreads.
  • Assembly along the main side.
  • Flashing and tightening.
  • The same is performed, on the other hand.
  • The edges are fixed with scotch or glued.

At the final stage, the resulting sphere is spreads.

Varieties

Due to many different assembly algorithms, it is necessary to first develop design. Crafts differ in each other. Often they serve for decorative purposes. In Asian countries, cafes, restaurants and trading places are decorated with pretty suspended things. Often they are an attribute on the marriage ceremonies. In everyday life is an excellent decor for the new year or any family celebration.

For children

For a homemade flashlight you need to have: multicolored paper, scissors, glue, ruler and pencil. Preparation of accessories, start work:

  1. A strip of 2 cm wide is cut off.
  2. The remaining part folds in half.
  3. The workpiece is drawn: a line with an indentation of 4 cm from the edge is carried out. From the folding to it, there are many lines at the same distance.
  4. Vertical strips are cut, after which the paper unfolds.
  5. The edge glueds.

In the end, the handle is attached from above.

Traditional view

For the subject you need to have a template in advance. A suitable ready-made sample is found on the Internet or draw yourself. For this:

  • The sheet is taken with the aspect ratio of 1: 2.
  • On a longer, 3 horizontal lines are carried out - 1 central and 2 with the same edge of the edges.
  • Paper vertical stripes is divided into 6 parts, each of which needs to be portrayed another line.
  • Draw mugs with a diameter of 2 cm.
  • Located at the top and bottom of the circles are connected by roundings.

As a result, the template looks like 6, interconnected in the center, similar segments. In the future, it is used as a blank for a flashlight, which is not divided into segments!

Now it is the queue of the compound of the extreme parts. The lower mugs are combined, flashed and decorated with a brush from threads. Similarly, it is performed with the upper circles, but it is left for hanging thread.

To start upwards

A frame will be required, which is easy to make wooden skewers for fruit covered with foil. For fuel, candle-tablets or cotton candles fastened with wire. The shell is made of rice or tissue paper. On the Internet, many are advised to use the garbage package.

Decoration

Usually flying lanterns do not decorate. If desired, you can use this way:

  • A huge number of holes are made on the decorative paper on the decorative paper.
  • Circles are evenly glued.

 

In view of the many assembly methods, you need to think in advance how it will look like - round, spherical or made according to the Kirigami principle.

It turns out that it is not difficult for making a Chinese paper flashlight when decorating the room is not difficult. It is important that they resemble the most ancient traditions, filling the lives with new, unforgettable impressions!

Photo ideas of homemade Chinese lanterns

This article will talk about the manufacture of Chinese lanterns with their own hands, which you can do yourself or attract children to the work. Such lanterns are perfect for decorating the room, garden, christmas ornaments or a corner of dreams.

They can easily turn your evening to the most unusual fairy tale. After all, in them we often read about the hall, which is decorated with thousands of multicolored lights, about a mysterious person who helps to illuminate the path of the main character.

So arrow all the necessary and start creating.

Chinese lanterns do it yourself: schemes are attached

Option for children

In this article we offer to view the most popular schemes of the manufacture of Chinese lanterns. And here is the first of them - a children's flashlight.

In order to make such a bauble, you need to take colored paper, pencils, ruler, scissors, glue, sequins, satin ribbons and colored markers.

Chinese lanterns do it yourself: schemes are attached

From any edge of the leaf, it is necessary to cut off the strip, in the future it will be a handle. Its width should be about two cm. The remaining paper bend in half and draw a line on it, which is at a distance of four cm from the edge. It is before this strip we will cut a flashlight.

Then throughout the remaining length of the paper, we mark the line, about one to one and a half width. We start to make cuts with scissors along the specified lines. We make it from the place of bend, but stop near the marked line.

Chinese lanterns do it yourself: schemes are attached

We open the paper and look if traces remained, we erase their eraser. Start now the edges with glue or clips. On the one hand, we attach the handle for the flashlight. Now you can decorate a flashlight with a sparkler, tinsel, thread. Instead of colored paper, you can also use the usual, white, in the future it can be disappearing at your own request.

For all traditions

The process of manufacturing the next Chinese paper lantern from paper can be traced on the example of the master class.

In order to perform these procedures, it is necessary to prepare a red cardboard, glue, scissors, pattern, pencil, red thread and needle, silver or gold paint.

Chinese lanterns do it yourself: schemes are attached

On the Internet, find and print a template, apply it to the cardboard and cut out the entire workpiece.

In no case you do not need to disconnect these details, they should specifically be similar, with a small harmonica.

Chinese lanterns do it yourself: schemes are attached

The first and the last part glued together. The next step must be connected to all sidewalls. Next, we take a thread with a needle and make a small hole at the top of our lantern. In the same way we collect the lower part of the flashlight.

We make a small brush for the bottom of the decoration. With silver paint, draw a variety of patterns. They can be pre-done on stencils. We apply such a stencil to the flashlight and spray paint.

Let's dry, and the flashlight is ready.

sky lattern

On the next step-by-step instructions, it is possible to consider the manufacture of a heavenly flying flashlight.

For the manufacture of this type of Chinese lanterns you will need cigarette or rice paper, straws, copper wire, candle and glue.

Chinese lanterns do it yourself: schemes are attached

We assign pieces of cigarette paper on each other and cut the rectangles. Then it is tightly tighten with the edges of the edge of each other. Then we make a small lining for straw and fold them in the form of a square. Cut the wire around the candle and attach along the edges to straws. We grow up a candle and let her warm up a little.

Decor for products

Well, the next point that we want to disassemble is one of the ways to decorate the heavenly lanterns.

To work, we need decorated paper, adhesive gun, hole punch and simple batteries.

Chinese lanterns do it yourself: schemes are attached

On decorated paper, it is necessary to break through about seventy holes with a hole punch.

Chinese lanterns do it yourself: schemes are attachedChinese lanterns do it yourself: schemes are attached

Then we deploy the ready-made ball, or we take the one that we did in the past master class. We begin to shock it with these circles on the principle of husk.

Chinese lanterns do it yourself: schemes are attached

  • Make sure that the whole ball is completely glued with decorated paper.
  • And now we are looking for the place where the ball can be attached.

Video on the topic

  1. Look a small selection of video to create colorful and unusual Chinese lanterns with your own hands.

A source: http://dekormyhome.ru/rukodelie/kitaiskie-fonariki-svoimi-rykami-iz-bymagi-shemy-s-video.html

How to make a chinese lantern with your own hands

Today, Chinese lanterns made in the sky are fashionable, made by their own hands. Flying flying into the sky is a beautiful sight, admire which both children and adults. So where did this popular fun coming from and what rules it is important to follow to ensure the safety of others.

Chinese lanterns do it yourself: schemes are attached

Story

For the first time, a paper chinese lantern was mentioned in the chronicle description of the military campaigns Zhoughe Lian. This legendary Chinese General imitated the intervention of the Divine Forces, instilling fear in his enemies. To do this, he used a paper bag and oil lamp. Stirring up the cloud of light convinced the opponents that the highest strength on the side of the general.

Similar devices were used to transmit signals between the military units located from each other. Information about this relate to the third century to our era. Some experts argue that flying lights were used to perform religious rituals.

Chinese lanterns do it yourself: schemes are attached

The history of the mass spread of luminous flashlights in Europe dates back to 2005. The cause was a tragic event: the 2004 earthquake in the Indian Ocean.

A commemorative event about this tragedy and its victims was a massive launch of luminous lamps in Thailand.

And thanks to the photos of this event, the winner of the World Press Photo, the Chinese ritual became popular among Europeans.

Device

Chinese Flying Flashlight consists of the following elements:

  • bamboo frame;
  • fixed on a thin wire burner from impregnated fuel fabric;
  • Dome from the non-combustible composition of rice paper.

The form of the product can be any - most often spherical or cylindrical.

Chinese lanterns do it yourself: schemes are attached

Operating principle

Chinese celestial lanterns are easily swept into the sky, acting on the same principles as balloons.

Remember Mongolfier brothers? Their invention is shells filled with hot smoke and can fly kilometers. The fact is that by heating the air becomes easier due to the decline in density.

The difference between the density of the air masses inside and outside the shell and becomes driving force.

Chinese lanterns do it yourself: schemes are attached

That is why among the tips on the launch of flying lanterns, you can often meet this: "In order to launch a flashlight, choose a clear frosty night."

Some characteristics

The traditional Chinese lantern has the following parameters:

  • approximate weight from 50 to 100 g;
  • height size from 70 to 170 cm;
  • Burning duration of about 20 minutes;
  • The diameter of the lower ring from 28 to 50 cm;
  • Approximate possible lifting height - up to 500 m.

Chinese lanterns do it yourself: schemes are attached

Is it possible to launch Chinese lanterns in the city

The non-elected lanterns startups often entails unpleasant consequences. Among them:

  • fires, including forests;
  • Power plants, declared;
  • Cattle case, randomly eating a fallen wire frame;
  • Injury animals.

Therefore, in some states there were prohibitions associated with this beautiful and exciting event. Relevant regulations were adopted in Russia.

Chinese lanterns do it yourself: schemes are attached

The law prohibiting the launch of Chinese lanterns in Russia

In 2014, changes were approved into the rules of fire regime.

In accordance with the document, the design, rising to height due to the warming of air inside with an open fire, is forbidden to let in cities, other settlements, near the forest arrays.

Lawyers warn: For violators, penalties are prescribed, for individuals this amount up to 1.5 thousand rubles, for legal, an order of magnitude higher.

By law, when planning an event with the mass launch of Chinese lanterns, it is necessary to pre-coordinate with the air traffic authorities.

Safety during operation

But even in those places where lanterns are allowed, it is important to comply with the safety of the surrounding rules. The launch of Chinese flashlights is allowed on open spaces on which the fall location can be controlled. Nearby should not be residential buildings. Do not let lanterns in windy weather.

Chinese lanterns do it yourself: schemes are attached

Responsible lovers of the launch of heavenly lanterns recommend: Use a small amount of fuel, so you will check the fall location and you can not only be convinced of full exaggeration, but also remove trash behind you.

Views

Chinese lanterns can differ in both shape and intended purpose. Often Chinese lanterns are used simply for decor.

Similar suspension options are often decorated with Asian cafes and restaurants, oriental shops. Glowing hearts can often be seen on dedicated to the marriage of celebrations.

And the simplest paper crafts will decorate the house for the new year or another family holiday.

Chinese lanterns do it yourself: schemes are attached

Chinese lanterns do it yourself from paper

Chinese flashlight can be easily made at home. Teachers recommend: Attract children to joint work, because they like to participate in creating a fairy tale.

Option for children

The simplest craft, reminiscent of the flashlight, has cut almost everyone as a child. For its manufacture, you need only one sheet of colored paper, and more scissors, glue, ruler and pencil as auxiliary materials.

The process consists of several short steps.

  1. You need to cut off the sheet with a strip of two centimeters width.
  2. Fold the remaining piece in half.
  3. Discharge the workpiece: at a distance of 4 cm from the edge to carry out a horizontal line and from the fold to carry out a lot of vertical, located at the same distance from each other.
  4. Make cuts on vertical stripes and deploy a sheet.
  5. To glue the edge and top to attach a handle from cut at the beginning of the strip.

Chinese lanterns do it yourself: schemes are attached

For all traditions

For such a suspension lantern, you will need a template. It can be found on the Internet or draw yourself. For the drawing you need to take a sheet with the aspect ratio of one to two. The long side is horizontally and draw three horizontal lines: one in the center and two at a short distance (the same) from the edges.

Then the sheet is separated by vertical lines into six sectors and in the center of each sector are carried out another line. Around the intersection points of central vertical lines with extreme horizontal paint circles with a diameter of approximately 2 cm.

Then the rounded lines connect the center of the upper mug, the intersection points limiting the vertical lines segment with central horizontal, the center of the lower mug.

As a result, the template must be a six central line of identical segments. A blank is cut out of red cardboard from cardboard. Important note: It is impossible to separate the segments!

Chinese lanterns do it yourself: schemes are attached

Next, it is necessary to connect to each other and extreme segments. Then combine the lower circles, flash them with a red thread and decorate the brush formed from the threads. You need to do the same with the upper circles, only instead of a tassel, we leave the thread for which the flashlight will be suspended.

sky lattern

For the manufacture of a Chinese flashlight need a framework. It can be made of wooden skewers for fruit wrapped. As the simplest fuel you can use candle-tablets or cotton wool moistened in alcohol. Metallic wire candle or rolling attached to a frame.

The shell can be done, as was done traditionally, from rice or tissue paper. But another advice is often found on the Internet of the Internet: use the usual trash can for the lantern.

Decor for products

Decorate it makes sense of lanterns intended for decoration, and not to run. One of the decor variants can be performed as follows.

Much a hole package (several dozen) holes on decorated paper. Favoring circles stick on the lantern on the principle of husk.

Important: It is necessary to distribute the circles evenly, following the product to be placed completely.

Today everyone can personally make a Chinese paper flashlight. And it does not matter: whether it will wash the luminous object or decor to decorate the interior to the sky. The main thing is that the ancient traditions are alive and make everyday life filled and beautiful.

A source: https://kitaygid.ru/tovary/kitajskij-fonarik-svoimi-rukami.

Chinese lantern with their own hands - examples, schemes and techniques for creating Chinese lanterns (85 photos)

If you need to unusually decorate the room, the garden or even the Christmas tree, then far asia comes to the rescue. Her peoples traditionally incite thousands of multicolored lights. In Middle Kingdom, this is "Kom Loy", we have just Chinese lanterns.

Chinese lanterns do it yourself: schemes are attached

The main thing is that the aestheticism of the thematic decor remains the same. Therefore, you can make a Chinese lantern from paper with your own hands both for the interior, and for children for fun.

Chinese lanterns do it yourself: schemes are attached

Children's Chinese flashlight

Practice making thematic decoration welcomes easy start. Therefore, simple children's lanterns will be needed both for "packing hands" and for their direct destination.

Chinese lanterns do it yourself: schemes are attached

Future glowing toy requires arms:

  • Colored paper;
  • Pencil;
  • Ruler;
  • Scissors;
  • Paper glue;
  • Sequins;
  • Satin ribbons.
  • Chinese lanterns do it yourself: schemes are attached
  • The process of making a children's lantern is as follows:
  • One edge of colored paper is cut for a 2 cm wide knob;
  • The rest of the area bends into two equal parts for sketching the line distant from the edge of 4 cm (the corresponding strip will serve as a "boundary of the cut" lantern);
  • One part of the sheet is marked with lines for cuts, which must be made from the fold to the cut border;
  • The paper is then revealed and cleaned by an eraser in the presence of traces;
  • The next step is the mounting of the edges and the handles by means of glue and clips.

Chinese lanterns do it yourself: schemes are attached

To make a Chinese paper flashlight with their own hands, pleased a childhood look, it must be decorated with sequins, tinsel, threads. Also, the paper can be painted with colored markers.

Chinese lanterns do it yourself: schemes are attachedChinese lanterns do it yourself: schemes are attachedChinese lanterns do it yourself: schemes are attachedChinese lanterns do it yourself: schemes are attachedChinese lanterns do it yourself: schemes are attached

Chinese lantern in original

Traditionally, the heavenly fire consists of paper and frame. Moreover, both elements must be special:

  • First, the frame is made of bamboo;
  • Secondly, the paper should be rice and impregnated with non-combustible composition.

For burning inside the Chinese lantern corresponds to x / b fabric. It is impregnated in advance with wax so that the burning is long and continuous. It remains unless to attach the paper burner to the frame by means of a thin wire.

  1. The current models have definitely changed: textiles and parchment picked polymeric substances, but for the manufacture of a frame, all the same dense rice paper and the panel of the tide massif are used.
  2. In the finished form the thematic products have a white color that can be painted or decorated with decor.

Production of the original Chinese lantern

If there is an interest on how to make a Chinese flashlight with your own hands, then you must first purchase the following consumables:

  • Paper density 25 g / kV. m (more dense analogues are not suitable, because due to them the product does not take off);
  • Flame retardant to impart resilience paper;
  • Light wooden rods (suitable wands for kebabs);
  • Lightweight wire;
  • X / b fabor;
  • Oil or wax for giving fabric combustible properties;
  • Glue or Scotch.
  • The principle of the manufacture of an air light is to fold the solid sheet of paper and its further cut in the middle so that the design can be cut and could "get fat".

The edges and individual fragments like the handle are connected to the "body" by means of tape. But first the workpiece must be treated with antipiren. The roof of the lantern is preferably bending.

Air lights are cylindrical, rectangular, round, square. Therefore, each scheme for creating a Chinese flashlight will be varied depending on the desired form and the area of ​​the thematic product.

Well, if the design of the Chinese lantern is enhanced with chopsticks. The latter also allow to obtain complex forms.

If the wire is used instead of sticks, then it is possible to get a design in the form of a romantic heart. To do this, it is enough to bend the wire.

The finished form requires the snap-to-fastener of the cross, which will keep fuel. Although if necessary, flammable textiles can be simply glued to the frame. The main thing is not to forget to impregnate the fuel with hot wax or flammable liquid.

Lanterns for decoration

The thematic decoration is appropriate to hang out the threshold in the house or in the garden along the tracks. In order for the design hung, in it at the stage of manufacture, it is necessary to provide a handle. If the last is not, then the hook can be attached to the center of the lid.

  1. Since decorative lanterns are not intended for flights, they can be lost so that they do not hang away from the wind.
  2. And if you need to make a round Chinese flashlight with your own hands, then rounded bases (bottom and lid) can perform as a frame, which will serve as the basis for fastening other rods.

Such elements already have a certain weight. They also allow you to easily separate the frame fragments from decorative paper.

So that Chinese lanterns glow, it is not necessary to use flammable substances in them. You can restrict ourselves to the cartridge and the LED lamp running from the batteries. It is safe, convenient and modern.

Secure Chinese lanterns

Smokery soaring in the sky sooner or later fall to the ground. The question is whether they burn at this time or not? After all, the slightest flame can awaken the massive fire, especially if the forest grows in the neighborhood or the field will be supplied. Therefore, Chinese lanterns are prohibited to launch next to mass vegetation.

Photo of the Chinese lantern made by their own hands will never tell about the need to wind the wool on the frame and the cross.

At the same time, the wool is in advance in antipyarem. Hence it is easy to understand the appointment of such a reception - a fire prevention. Also soft angles are safe for curious animals.

A bad idea is to use trash and other cellophane packages for tosing Chinese lanterns. The fact is that the corresponding products do not decompose, and therefore contaminate nature.

Photo of chinese lanterns do it yourself

Please make repost

A source: https://svoimirukami.guru/kitajskij-fonarik-svoimi-rukami/

How to make celestial lanterns do it yourself

Chinese lanterns do it yourself: schemes are attached

articles:

The history of the appearance of heavenly lanterns

This story about heavenly lanterns is more likely to legend, but very beautiful legend. In the XI century, many monks lived in one of the Chinese villages.

Their life was heavy, they had to work most of the day to not only feed themselves, but also to support life in the village. Like most of the peasants, they were engaged in agriculture.

Unfortunately, the local climate and soil did not allow to grow a decent harvest. In addition, the situation has deteriorated every year, rice was obtained less and less.

Watching how all the works go into the empty, the villagers began to give hands. The leader of the monks, dear Mr. Zhi Lin, realizing that it was impossible to leave it, in every way tried to raise the spirit from all the inhabitants. To prevent the growth of lawlessness, theft, Ji Lin, together with his monks, began to pray every evening. Together with the prayer, torches were lit throughout the village.

People believed that the flames of torches purifies the soul, gives peace and gives strength. Soon, all residents of the village did not notice themselves, lost their alarms, lost the suffocating boredom and gained strength not only to work but to live. Life in the village slowly began to improve, and rice crops increase.

The rite with fire began to spend each week it helped to maintain the life of the village in a stable bed.

Watching what benefits bring rites, Ji Lin decided to betray them some symbolism and beauty. Having gathered monks, Ji proposes to build a small balloon from rice paper. It was this moment that marked the beginning of the history of the heavenly lanterns.

The flashlight represented: bamboo frame covered with lightweight rice paper. Having made several dozen aerostats, the monks mocked their inhabitants. At the end of the week, the long-awaited rite took place. Residents crashed into pairs. One pair held the heavenly flashlight, the second from the bottom brought outdoor fire.

Flame of fire illuminated a light light with a soft light. Dozens of "Svetlychkov" covered the whole village. It was a truly fascinating spectacle. As soon as the designs were filled with hot air, they took off for a few seconds, after which they returned to the hands of people. So continued again and again.

Watching this action, LIIN wondered how to attach the torch to the frame so that the flame of the fire supported and raised the flashlight constantly. The monks suggested pulling a thin wire on the frame, in the center fasten a small paper roll, well-soaked in the wax.

As a result, the monks got what they wanted, the heavenly flashlight climbing the beautiful light, swam in heaven, giving all the inhabitants with joy.

Chinese lanterns do it yourself: schemes are attached

This ceremony has become a custom, which was held on every panicist, be it a birthday, wedding or harvest festival. Each ceremony filled people with new forces, gave joy, calm and confidence. The village has flourished safely. Residents began to grow new cultures: cotton, tea. The news of the magic celestial lanterns gradually scattered throughout Asia.

At these times, Mongols dominated the territory of modern China. In the famous village there was one guy Zhu Yuanjan, son of an ordinary peasant. He extremely did not like this situation. A little matured, the guy decided to organize an uprising and finally drive the invaders from his land.

Taking a blessing among the elder the village of Zhu began to gather in campaign, to find like-minded people. One of the monks came to him and gave his horse along with the box of heavenly lanterns. Zhu thanked the monk and asked why lanterns might need.

To which the sage answered: "The spirit of each warrior is growing and loses his alarm when the heavenly lantern is launched. In addition, they will be useful to you to file a silent signal. "

No one no longer remembers how I was able to gather a big army and head it. But it still used the lanterns, but not as signal tools, but to distract attention. In a decisive battle, Zhu, together with his warriors, launched all lanterns into the sky.

The enemy, seeing hundreds of lights in the sky, decided that Loy Kraton was coming (the holiday of lights), all the warriors were distracted, withered observing the action. At this moment, Zhong's army struck, won.

Later, Zhu Yuanjan created his empire mines, which rightly ruled for a long time.

This story has long lost the roots and turned into a beautiful legend. But some Buddhist monks argue that this whole story is true of the truth ...

How to make a sky lantern with your own hands

Many have seen on TV festivals of heavenly lanterns. This spectacle looks just fascinating. Many wondered how to make such a flashlight with their own hands and how difficult it would be. In fact, its design is very simple and easy to manufacture.

It will take:

  • Cigarette paper;
  • Thin wire;
  • Glue;
  • Flame retardant solution;
  • Wax;
  • Paper towel;
  • Bamboo hoop;
  • Cardboard;

In order for the flashlight when starting it, it flared up from high temperature, it is necessary to handle paper with flame retardant solution. Paper for heavenly lanterns is used for cigarette.

Wipe sheets on the rope and with the help of a sprinkler, soak paper. After the sheets are dried, cut off a small piece of paper and try to burn it.

If the paper is lit, then you need to once again handle the sheets of flame retardant.

  • Chinese lanterns do it yourself: schemes are attached
  • According to this sketch, we make molds from the cardboard, according to which in the future we will cut fragments of the lantern from cigarette paper.
  • Chinese lanterns do it yourself: schemes are attachedOne cell on the sketch is 1 centimeter.

We fold the sheet of cigarette paper in half, apply molds and cut out (leave a little space, about 1 centimeter, for gluing fragments). You need to cut four fragments.

  1. Chinese lanterns do it yourself: schemes are attached
  2. We glue all parts of the heavenly lantern, to the places of gluing, put a small cargo and leave the workpiece to dry for 2-3 hours.
  3. Chinese lanterns do it yourself: schemes are attached

We will make a hoop. You can buy already ready bamboo or make it with your own hands from small sticks, gluing them with each other. You can also use fine rigid wire.

Chinese lanterns do it yourself: schemes are attached

The burner for the celestial lantern is made of paper towels and thin cardboard. Melt the wax on the water bath. Mandatory in a water bath, and not just in a saucepan on the stove (wax can flash) !!! Cut the slim cardboard on the squares and feed them in the wax. Cut the tape from the towel and also feed it with wax.

Chinese lanterns do it yourself: schemes are attached

After the paper gets dry, we put it with the harmonica and inside the impregnated squares of the cardboard. Then in the center we produce four holes in which we produce a thin wire. Wire ends Leave such a length so that they can be consolidated to the hoop. Attaching the burner in the center of the hoop, glit it to the harvested paper bag.

Chinese lanterns do it yourself: schemes are attached

At this, the manufacture of the heavenly lantern (Chinese) with their own hands is completed and the trial time has come.

How to run the heavenly flashlight (video instruction)

  • Well, what happened in the end of our work.
  • Now you know how to make celestial lanterns with your own hands.
  • Festivals, annually conducted in different countries of the world - a fascinating spectacle in which it is necessary to participate absolutely to everyone.

A source: https://all-he.ru/publ/svoimi_rukami/igrushki/kak_sdelat_nebesnye_fonariki_svoimi_rukami/4-1-0-165

How to make a Chinese flashlight with your own hands, flying including: step-by-step instructions

Published Sep 23, 2019

In fact, the Chinese flashlight is a flying design that acts on the principle of air density differences inside and outside. It is usually out of paper and a wooden frame, and it will not make it difficult to make it.

How the Chinese lantern works

The first copies of this adaptation are mentioned in the chronicles of the Treasy Age (period in ancient China from 220 to 280).

According to the legend during the time of military hikes, General Zhuge Liana thus imitated the intervention of the highest strength than the fear of his opponents inspired. Then it was a paper bag and oil lamp. The principle of the flight of the celestial flashlight is easy to explain.

The flame of the burner heats the air under the dome, its density and mass decrease. Since the air inside becomes easier outdoor, the flashlight takes off.

Chinese lanterns do it yourself: schemes are attached

Heavenly Fnarik is renovated at a height of 200-500 meters

The successful trajectory of flight depends on the correct calculation of the ratio of the gravity and force of Archimedes. Balloons take off the same law.

What makes a variety

Traditionally, the lantern frame was performed from bamboo. Now the designs are adapted to Europe, so it uses any tree or rod from a light metal. At the bottom of the layout there is a burner.

It is made on the likeness of the wick: Cotton fabric or porous paper impregnated with wax or exhaled in flammable liquids. In modern models, there may be combustible polymers in this place.

Chinese lanterns do it yourself: schemes are attached

Heart-shaped flashlights launch lovers to declare their feelings

According to the rules, the dome is manufactured from rice paper, which is treated with a special solution to avoid fire. The form of lanterns can be different: from ordinary geometric shapes to an image of animals.

How to make a chinese paper flashlight with your own hands

Nowadays, lanterns are often used not only to run into the sky, but also in decorative purposes.

And since Asia is particularly popular, then you can meet these design elements in thematic cafes and restaurants, in the interiors of apartments and design showcases.

The launch of the celestial lanterns is no longer considered something exotic and becomes traditional at some celebrations. You can make yourself not only a simple ornamental model, but also a flying design.

Simple version in the technique of Kirigami

Required materials and tools:

  • Color cardboard format A4 - 2 sheets;
  • line;
  • pencil;
  • stationery knife;
  • glue.

Chinese lanterns do it yourself: schemes are attached

You can use a ready-made lantern pattern or draw your

Step-by-step instruction:

  1. Along the large sides, spend the lines at a distance of 1.5 cm from the edge.
  2. On these lines, put marks through each centimeter.
  3. Connect dots with straight lines.
  4. At the noted strips to make cuts using the stationery knife and ruler.
  5. According to the previously drawn along the edge of the parallel to make bend.
  6. Connect the edges of the paper, forming a cylinder, glue them.
  7. The width of the second sheet A4 is reduced to 13 cm and also connect the edges by forming a cylinder.
  8. Insert the resulting form inside the carved, give the flashlight the completed view, securing the glue paper.

Video: Simple colored paper lantern

Round flashlight

Required materials and tools:

  • pattern on red paper;
  • cardboard under the pattern;
  • elements for the decor of gold color;
  • cord (preferably from silk threads);
  • threads;
  • needle;
  • Scotch;
  • scissors.

Chinese lanterns do it yourself: schemes are attached

Round flashlight is best suited for creating an interior in Asian style

Step-by-step instruction:

  1. Stick pattern on cardboard sheet.
  2. Decorate the future lantern with decorative details on the topic.
  3. Cut mandal.
  4. Connect the ends of the template, fasten with scotch.
  5. Tie the thread alternately opposite elements patterns, forming a ball.
  6. From the cord make a brush and attach it to the flashlight.

Flying flashlight

Required materials and tools:

  • Thin wooden sticks - 4 pcs.;
  • Paper napkin - 1 pc.;
  • alcohol burner;
  • wire;
  • candle;
  • Scotch;
  • threads;
  • package for garbage with a volume of 60 l - 2 pcs.;
  • scissors.

Chinese lanterns do it yourself: schemes are attached

In China, flying lanterns even on serial transparency make manually

Step-by-step instruction:

  1. Napkin cut into 4 parts and fold them with a stack.
  2. Melt the candle on the alcohol burner. The resulting liquid paraffin pour the napkin and wait for frozen.
  3. Tie the ends of wooden raysin threads forming a circle.
  4. One package to cut the sealed side.
  5. Connect two packages among themselves, securing them with scotch. Thus, the size of the dome is lengthened.
  6. Insert a wooden circle into the package and fix the scotch.
  7. To the frame to fasten 2 wire diagonally crosswise.
  8. In the place of the crossing the wire fasten the burner.
  9. When starting, first warm the air inside the dome, then release the design. Follow safety rules.

Video: Heavenly flashlight do it yourself

https://youtube.com/watch?v=2cx-fevdfiq

Precautions

In many countries, the launch of heavenly flashlights is prohibited at the legislative level. To avoid environmental consequences, the Committee on the Littleness, Law Enforcement and Security Committee, as well as the Environmental Protection Committee, Environmental Protection and the Environmental Safety of the Russian Federation, does not recommend using flying lanterns and similar designs.

Because of the burning devices launched by people, fires in the forests, fields and houses happened. A wire frame of a fallen lamp is a danger to small animals that can get into this trap. Changes in the rules of the fire regime of the Russian Federation prohibit the launch in the sky of burning structures. For violators, a fine is registered.

Chinese lanterns do it yourself: schemes are attached

According to the Chinese tradition, heavenly lanterns are launched to "put their requests and desires in the ears of the Divine"

When planning measures with the mass use of heavenly flashlights, coordination with the relevant authorities is necessary. The main security measures should also be adhered to:

  • Run to produce in open areas where you can track the drop in the design;
  • It is forbidden to launch them into windy weather, as well as near residential arrays, airports and fire hazardous buildings;
  • To have the ability to control the full extension and track the fall location, you need to use a small amount of fuel component.

The launch ceremony into the sky of magic lights has turned into a fascinating custom. He came to us from fabulous Asia and massively spread over Europe since 2005 after the tragic earthquake in the Indian Ocean in 2004.

Chinese lanterns can be made part of the interior or decoration the thematic party. For their manufacture, available materials and minimum effort are required. The main thing is to comply with the safety rules, then they will only bring joy.

A source: https://larachat.ru/handmade/kitayskiy-fonarik-svoimi-rukami.

Chinese lanterns do it yourself

This bright symbol of love and fulfillment of desires entered the fashion relatively recently. Let's learn his story, as well as consider how to make Chinese lanterns in a step-by-step lesson with their own hands.

Chinese lanterns do it yourself: schemes are attached

Mastery Traditional Chinese lanterns do it yourself: History

There are several versions of the history of the lanterns. Initially, they appeared in order to transmit military signals. When the war ended, the need to light bright lights left, then Chinese lanterns began to identify with a symbol of communication between the worlds and souls.

  • Currently, the lantern of desires can be bought in many stores of any country, he will become an excellent gift for the new year or birthday. After all, the magic, which he gives, is worth the one that this symbol is loved by many people who launch him, sincerely believe in the exercise of their desires, that he picks up with him all sorrows, resentment and disappointment.
  • In China, many years ago, lanterns were made of paper, which was richly washed and stretched on a light bamboo frame. The form of a flashlight can be the most diverse: from simple geometric shapes to complex and intricate silhouettes. To understand the principle of operation of the element under consideration, you can conduct an experiment with a plastic bottle in water. If the bottle is empty, then it is possible to keep it under water with great difficulty, if it is filled with liquid, then it will immediately go to the bottom.
  • Indian girls lanterns are used as gifts to divine temples, believing that they will receive enlightenment.
  • Buddhists believe that together with the burner in the flashlight, negative thoughts and problems are carried out.
  • Each of the stories causes admiration, so we will not deepen in search of truth.
  • The whole principle of the operation of the flying object is built on the law of Archimedes, obeying which the more dense substance pushes a more discharged substance. And we all know well that heating, the air becomes more easy and discharged. That is why the flashlight with a burning light is so easily flies.
  • According to the technical characteristics of the lanterns surprise: rise to height from 1000km, under good weather conditions height increases not one kilometer. On the fascinating beauty of soaring lights, you can admire about twenty minutes, and the memories are enough much for more time.

As already mentioned, the flashlight consists of rice paper, thoroughly impregnated with oil, a frame consisting of a bamboo and burner, which can be replaced with paper or cloth impregnated with wax or other substance. So that the rice paper does not catch up during the flight, it is impregnated with a special non-combustible substance.

In order to make a flashlight quickly and just do it yourself, you can take advantage of even a garbage bag, but it is unlikely that he can give the same clean feelings that you feel looking at the removing light. And also does not greatly want to make a desire to the garbage bag, so this option must be used only in very extreme cases. For example, to explain the child physics.

Chinese lanterns do it yourself: schemes are attached

Lantern production schemes as such is not, the entire explanation will be verbal. We will need paper whose weight should be no more than 25 grams per square meter. This requirement must be fulfilled, otherwise the flashlight will not be able to take off because of his gravity and burns at the earth itself.

When you managed to choose a suitable paper, you should think about the desired form of the object. Consider the simplest of the existing ones. It will take four squares for it with a size of 110x110cm and to impregnate them with a special means to give heat resistance and refractory. In this case, the choice fell on the flame retardant, which gives the paper to protection not only from the fire, but also from moisture.

Let's proceed to manufacture. Sheets of paper need to glue in such a way that they formed the dome a bit of a slightly flap, and the pipe should go down from the dome, which is slightly narrowed at the base.

Chinese lanterns do it yourself: schemes are attached

Next you need to make a frame. It should be made of light material and bend well. It may be light wood or bamboo. Again, you can use any other material that will meet the requirements.

Chinese lanterns do it yourself: schemes are attached

Collect the frame is easy, its form does not require special parameters. Then we attach the paper dome to the collected frame with the help of glue, tape or other adhesive material. To prepare fuel for a flashlight, take paper or fabric and impregnate hot wax or any liquid that has a property of light flammability.

The burner to the flashlight can be attached using a wire - this is the most convenient and fast mounting option. Everything is ready, you can start lantern. Do not forget to make a desire!

Chinese lanterns do it yourself: schemes are attached

Since our flashlight is made with your own hands, you can give it an original color using special gentle paints or markers. Multicolored blown balls in the air look very original.

Video on the topic

  • At the end of the article, we collected interesting videos for you, in which you can see the manufacture of Chinese lanterns in the selection with your own hands, and the launch of them into the sky.

[media = https: //www.youtube.com/watch? V = y_AH2QPDAEC]

A source: https://sdelalala-sama.ru/podelki/3216-kitayskie-fonariki-svoimi-rukami.html

Heavenly candle or Chinese lantern with their own hands

Winter, frost, snow on the knee. I sit at home of a scarlet not enduring. And then suddenly wanted something to create.

Aerial modern ball, many know that he can fly, hot air is injected into it. Hot air, it is discharged and rises up. Once in the dome, fills and raises it. The ball has a large volume and easily takes in the flight basket, balloon gas and three or four passengers. So that the ball had a volatility, it is timefully blowing a portion of hot air.

The same principle of Chinese lanterns. A wonderful heavenly flashlight, similar to a small balloon, although without passengers, was invented two thousand years ago, in China. People, running this miracle believed that rice paper lanterns are able to fulfill desires. They are arranged like this: rice paper, bottom bamboo frame, to which the burner is attached. Fuel is on, heat is formed, the lifting force is created.

They are on sale, the cost of them is from 50 to 300 rubles. You can buy and run in the dark. This is not crackling fireworks. They are silent, gentle and romantic as a dinner with candlelight. When you defend the shimmering light in the dark, the impression that a piece of the soul rises in eternity.

Why people do these products themselves, because their value is not great? I think they just feel a feeling of deep satisfaction from their hostess and "crazyness".

So I decided to join them.

I can hardly get rice paper, and also impregnation. Therefore, I will take what is at hand.

Fuel - Paraffined Napkin

Dome - a garbage bag of 60 liters

Frame - PVC Corner

Foil, Scotch, thin copper wire

Found a plastic bag, by 60 liters, cheap. Not for saving considerations - just the cheaper, the thinner, it began to rise above. Deployed it and measured the roulette, what a frame should be.

For the frame took the PVC corner, the copper wire is heavy, stated and shared scissors into two parts along. Then glue glue into the ring.

Next, the bag pulled on the glued frame and scotch tape recorded

Thin copper wire pulled the cross in the frame, and the foil laid out the platform under the burner

The torch made out of the napkin, paid the paraffin and impregnated it, folded several times it.

A deep evening came, in the cold the most successfully pass such launches, because of the decent difference of temperatures. Dressed, warming, went out on the outskirts. Some of the burner. A garbage bag as it was lazily gained volume. Two times the flame was licked the wall of the dome, but it cost, the product was not melted. A minute later, we felt that the flashlight lost the attraction of the Earth. Running fingers, I released a flashlight and watched how a shimmering light was getting smaller and less.

Become an author of the site, publish your own articles, descriptions of homemade with payment for text.

Read more here

.

If you need to unusually decorate the room, the garden or even the Christmas tree, then far asia comes to the rescue. Her peoples traditionally incite thousands of multicolored lights. In Middle Kingdom, this is "Kom Loy", we have just Chinese lanterns.

The main thing is that the aestheticism of the thematic decor remains the same. Therefore, you can make a Chinese lantern from paper with your own hands both for the interior, and for children for fun.

Children's Chinese flashlight

Practice making thematic decoration welcomes easy start. Therefore, simple children's lanterns will be needed both for "packing hands" and for their direct destination.

Future glowing toy requires arms:

  • Colored paper;
  • Pencil;
  • Ruler;
  • Scissors;
  • Paper glue;
  • Sequins;
  • Satin ribbons.

The process of making a children's lantern is as follows:

  • One edge of colored paper is cut for a 2 cm wide knob;
  • The rest of the area bends into two equal parts for sketching the line distant from the edge of 4 cm (the corresponding strip will serve as a "boundary of the cut" lantern);
  • One part of the sheet is marked with lines for cuts, which must be made from the fold to the cut border;
  • The paper is then revealed and cleaned by an eraser in the presence of traces;
  • The next step is the mounting of the edges and the handles by means of glue and clips.

To make a Chinese paper flashlight with their own hands, pleased a childhood look, it must be decorated with sequins, tinsel, threads. Also, the paper can be painted with colored markers.

Chinese lantern in original

Traditionally, the heavenly fire consists of paper and frame. Moreover, both elements must be special:

  • First, the frame is made of bamboo;
  • Secondly, the paper should be rice and impregnated with non-combustible composition.

For burning inside the Chinese lantern corresponds to x / b fabric. It is impregnated in advance with wax so that the burning is long and continuous. It remains unless to attach the paper burner to the frame by means of a thin wire.

The current models have definitely changed: textiles and parchment picked polymeric substances, but for the manufacture of a frame, all the same dense rice paper and the panel of the tide massif are used.

In the finished form the thematic products have a white color that can be painted or decorated with decor.

Production of the original Chinese lantern

If there is an interest on how to make a Chinese flashlight with your own hands, then you must first purchase the following consumables:

  • Paper density 25 g / kV. m (more dense analogues are not suitable, because due to them the product does not take off);
  • Flame retardant to impart resilience paper;
  • Light wooden rods (suitable wands for kebabs);
  • Lightweight wire;
  • X / b fabor;
  • Oil or wax for giving fabric combustible properties;
  • Glue or Scotch.

The principle of the manufacture of an air light is to fold the solid sheet of paper and its further cut in the middle so that the design can be cut and could "get fat".

The edges and individual fragments like the handle are connected to the "body" by means of tape. But first the workpiece must be treated with antipiren. The roof of the lantern is preferably bending.

Air lights are cylindrical, rectangular, round, square. Therefore, each scheme for creating a Chinese flashlight will be varied depending on the desired form and the area of ​​the thematic product.

Well, if the design of the Chinese lantern is enhanced with chopsticks. The latter also allow to obtain complex forms.

If the wire is used instead of sticks, then it is possible to get a design in the form of a romantic heart. To do this, it is enough to bend the wire.

The finished form requires the snap-to-fastener of the cross, which will keep fuel. Although if necessary, flammable textiles can be simply glued to the frame. The main thing is not to forget to impregnate the fuel with hot wax or flammable liquid.

Lanterns for decoration

The thematic decoration is appropriate to hang out the threshold in the house or in the garden along the tracks. In order for the design hung, in it at the stage of manufacture, it is necessary to provide a handle. If the last is not, then the hook can be attached to the center of the lid.

Since decorative lanterns are not intended for flights, they can be lost so that they do not hang away from the wind.

And if you need to make a round Chinese flashlight with your own hands, then rounded bases (bottom and lid) can perform as a frame, which will serve as the basis for fastening other rods.

Such elements already have a certain weight. They also allow you to easily separate the frame fragments from decorative paper.

So that Chinese lanterns glow, it is not necessary to use flammable substances in them. You can restrict ourselves to the cartridge and the LED lamp running from the batteries. It is safe, convenient and modern.

Secure Chinese lanterns

Smokery soaring in the sky sooner or later fall to the ground. The question is whether they burn at this time or not? After all, the slightest flame can awaken the massive fire, especially if the forest grows in the neighborhood or the field will be supplied. Therefore, Chinese lanterns are prohibited to launch next to mass vegetation.

Photo of the Chinese lantern made by their own hands will never tell about the need to wind the wool on the frame and the cross.

At the same time, the wool is in advance in antipyarem. Hence it is easy to understand the appointment of such a reception - a fire prevention. Also soft angles are safe for curious animals.

A bad idea is to use trash and other cellophane packages for tosing Chinese lanterns. The fact is that the corresponding products do not decompose, and therefore contaminate nature.

Photo of chinese lanterns do it yourself

Please make repost

This article will talk about the manufacture of Chinese lanterns with their own hands, which you can do yourself or attract children to the work. Such lanterns are perfect for decorating the room, garden, christmas ornaments or a corner of dreams. They can easily turn your evening to the most unusual fairy tale. After all, in them we often read about the hall, which is decorated with thousands of multicolored lights, about a mysterious person who helps to illuminate the path of the main character. So arrow all the necessary and start creating.

Chinese lanterns do it yourself from paper: schemes with video

Option for children

In this article we offer to view the most popular schemes of the manufacture of Chinese lanterns. And here is the first of them - a children's flashlight.

In order to make such a bauble, you need to take colored paper, pencils, ruler, scissors, glue, sequins, satin ribbons and colored markers.

Chinese lanterns do it yourself from paper: schemes with video

From any edge of the leaf, it is necessary to cut off the strip, in the future it will be a handle. Its width should be about two cm. The remaining paper bend in half and draw a line on it, which is at a distance of four cm from the edge. It is before this strip we will cut a flashlight.

Then throughout the remaining length of the paper, we mark the line, about one to one and a half width. We start to make cuts with scissors along the specified lines. We make it from the place of bend, but stop near the marked line.

Chinese lanterns do it yourself from paper: schemes with video

We open the paper and look if traces remained, we erase their eraser. Start now the edges with glue or clips. On the one hand, we attach the handle for the flashlight. Now you can decorate a flashlight with a sparkler, tinsel, thread. Instead of colored paper, you can also use the usual, white, in the future it can be disappearing at your own request.

For all traditions

The process of manufacturing the next Chinese paper lantern from paper can be traced on the example of the master class.

In order to perform these procedures, it is necessary to prepare a red cardboard, glue, scissors, pattern, pencil, red thread and needle, silver or gold paint.

Chinese lanterns do it yourself from paper: schemes with video

On the Internet, find and print a template, apply it to the cardboard and cut out the entire workpiece.

In no case you do not need to disconnect these details, they should specifically be similar, with a small harmonica.

Chinese lanterns do it yourself from paper: schemes with video

The first and the last part glued together. The next step must be connected to all sidewalls. Next, we take a thread with a needle and make a small hole at the top of our lantern. In the same way we collect the lower part of the flashlight. We make a small brush for the bottom of the decoration. With silver paint, draw a variety of patterns. They can be pre-done on stencils. We apply such a stencil to the flashlight and spray paint. Let's dry, and the flashlight is ready.

sky lattern

On the next step-by-step instructions, it is possible to consider the manufacture of a heavenly flying flashlight.

For the manufacture of this type of Chinese lanterns you will need cigarette or rice paper, straws, copper wire, candle and glue.

Chinese lanterns do it yourself from paper: schemes with video

We assign pieces of cigarette paper on each other and cut the rectangles. Then it is tightly tighten with the edges of the edge of each other. Then we make a small lining for straw and fold them in the form of a square. Cut the wire around the candle and attach along the edges to straws. We grow up a candle and let her warm up a little.

Decor for products

Well, the next point that we want to disassemble is one of the ways to decorate the heavenly lanterns.

To work, we need decorated paper, adhesive gun, hole punch and simple batteries.

Chinese lanterns do it yourself from paper: schemes with video

On decorated paper, it is necessary to break through about seventy holes with a hole punch.

Chinese lanterns do it yourself from paper: schemes with video

Chinese lanterns do it yourself from paper: schemes with video

Then we deploy the ready-made ball, or we take the one that we did in the past master class. We begin to shock it with these circles on the principle of husk.

Chinese lanterns do it yourself from paper: schemes with video

Chinese lanterns do it yourself from paper: schemes with video

Chinese lanterns do it yourself from paper: schemes with video

Make sure that the whole ball is completely glued with decorated paper.

Chinese lanterns do it yourself from paper: schemes with video

And now we are looking for the place where the ball can be attached.

Chinese lanterns do it yourself from paper: schemes with video

Video on the topic

Look a small selection of video to create colorful and unusual Chinese lanterns with your own hands.

Today, Chinese lanterns made in the sky are fashionable, made by their own hands. Flying flying into the sky is a beautiful sight, admire which both children and adults. So where did this popular fun coming from and what rules it is important to follow to ensure the safety of others.

Chinese lantern

Story

For the first time, a paper chinese lantern was mentioned in the chronicle description of the military campaigns Zhoughe Lian. This legendary Chinese General imitated the intervention of the Divine Forces, instilling fear in his enemies. To do this, he used a paper bag and oil lamp. Stirring up the cloud of light convinced the opponents that the highest strength on the side of the general.

Similar devices were used to transmit signals between the military units located from each other. Information about this relate to the third century to our era. Some experts argue that flying lights were used to perform religious rituals.

Chinese lantern

The history of the mass spread of luminous flashlights in Europe dates back to 2005. The cause was a tragic event: the 2004 earthquake in the Indian Ocean. A commemorative event about this tragedy and its victims was a massive launch of luminous lamps in Thailand. And thanks to the photos of this event, the winner of the World Press Photo, the Chinese ritual became popular among Europeans.

Device

Chinese Flying Flashlight consists of the following elements:

  • bamboo frame;
  • fixed on a thin wire burner from impregnated fuel fabric;
  • Dome from the non-combustible composition of rice paper.

The form of the product can be any - most often spherical or cylindrical.

Chinese lantern

Operating principle

Chinese celestial lanterns are easily swept into the sky, acting on the same principles as balloons. Remember Mongolfier brothers? Their invention is shells filled with hot smoke and can fly kilometers. The fact is that by heating the air becomes easier due to the decline in density. The difference between the density of the air masses inside and outside the shell and becomes driving force.

Chinese lantern

That is why among the tips on the launch of flying lanterns, you can often meet this: "In order to launch a flashlight, choose a clear frosty night."

Some characteristics

The traditional Chinese lantern has the following parameters:

  • approximate weight from 50 to 100 g;
  • height size from 70 to 170 cm;
  • Burning duration of about 20 minutes;
  • The diameter of the lower ring from 28 to 50 cm;
  • Approximate possible lifting height - up to 500 m.

Chinese lantern

Is it possible to launch Chinese lanterns in the city

The non-elected lanterns startups often entails unpleasant consequences. Among them:

  • fires, including forests;
  • Power plants, declared;
  • Cattle case, randomly eating a fallen wire frame;
  • Injury animals.

Therefore, in some states there were prohibitions associated with this beautiful and exciting event. Relevant regulations were adopted in Russia.

Chinese lantern

The law prohibiting the launch of Chinese lanterns in Russia

In 2014, changes were approved into the rules of fire regime. In accordance with the document, the design, rising to height due to the warming of air inside with an open fire, is forbidden to let in cities, other settlements, near the forest arrays. Lawyers warn: For violators, penalties are prescribed, for individuals this amount up to 1.5 thousand rubles, for legal, an order of magnitude higher.

By law, when planning an event with the mass launch of Chinese lanterns, it is necessary to pre-coordinate with the air traffic authorities.

Safety during operation

But even in those places where lanterns are allowed, it is important to comply with the safety of the surrounding rules. The launch of Chinese flashlights is allowed on open spaces on which the fall location can be controlled. Nearby should not be residential buildings. Do not let lanterns in windy weather.

Chinese lantern

Responsible lovers of the launch of heavenly lanterns recommend: Use a small amount of fuel, so you will check the fall location and you can not only be convinced of full exaggeration, but also remove trash behind you.

Views

Chinese lanterns can differ in both shape and intended purpose. Often Chinese lanterns are used simply for decor. Similar suspension options are often decorated with Asian cafes and restaurants, oriental shops. Glowing hearts can often be seen on dedicated to the marriage of celebrations. And the simplest paper crafts will decorate the house for the new year or another family holiday.

Chinese lantern

Chinese lanterns do it yourself from paper

Chinese flashlight can be easily made at home. Teachers recommend: Attract children to joint work, because they like to participate in creating a fairy tale.

Option for children

The simplest craft, reminiscent of the flashlight, has cut almost everyone as a child. For its manufacture, you need only one sheet of colored paper, and more scissors, glue, ruler and pencil as auxiliary materials.

The process consists of several short steps.

  1. You need to cut off the sheet with a strip of two centimeters width.
  2. Fold the remaining piece in half.
  3. Discharge the workpiece: at a distance of 4 cm from the edge to carry out a horizontal line and from the fold to carry out a lot of vertical, located at the same distance from each other.
  4. Make cuts on vertical stripes and deploy a sheet.
  5. To glue the edge and top to attach a handle from cut at the beginning of the strip.

Chinese lantern

For all traditions

For such a suspension lantern, you will need a template. It can be found on the Internet or draw yourself. For the drawing you need to take a sheet with the aspect ratio of one to two. The long side is horizontally and draw three horizontal lines: one in the center and two at a short distance (the same) from the edges. Then the sheet is separated by vertical lines into six sectors and in the center of each sector are carried out another line. Around the intersection points of central vertical lines with extreme horizontal draw mugs with a diameter of approximately 2 cm. Then the round lines connect the center of the upper mug, the intersection points limit the vertical lines segment with central horizontal, the center of the lower mug.

As a result, the template must be a six central line of identical segments. A blank is cut out of red cardboard from cardboard. Important note: It is impossible to separate the segments!

Chinese lantern

Next, it is necessary to connect to each other and extreme segments. Then combine the lower circles, flash them with a red thread and decorate the brush formed from the threads. You need to do the same with the upper circles, only instead of a tassel, we leave the thread for which the flashlight will be suspended.

sky lattern

For the manufacture of a Chinese flashlight need a framework. It can be made of wooden skewers for fruit wrapped. As the simplest fuel you can use candle-tablets or cotton wool moistened in alcohol. Metallic wire candle or rolling attached to a frame.

The shell can be done, as was done traditionally, from rice or tissue paper. But another advice is often found on the Internet of the Internet: use the usual trash can for the lantern.

Chinese lantern

Decor for products

Decorate it makes sense of lanterns intended for decoration, and not to run. One of the decor variants can be performed as follows. Much a hole package (several dozen) holes on decorated paper. Favoring circles stick on the lantern on the principle of husk. Important: It is necessary to distribute the circles evenly, following the product to be placed completely.

Today everyone can personally make a Chinese paper flashlight. And it does not matter: whether it will wash the luminous object or decor to decorate the interior to the sky. The main thing is that the ancient traditions are alive and make everyday life filled and beautiful.

Mastery Chinese lantern with their own hands

Published Sep 23, 2019

In fact, the Chinese flashlight is a flying design that acts on the principle of air density differences inside and outside. It is usually out of paper and a wooden frame, and it will not make it difficult to make it.

How the Chinese lantern works

The first copies of this adaptation are mentioned in the chronicles of the Treasy Age (period in ancient China from 220 to 280). According to the legend during the time of military hikes, General Zhuge Liana thus imitated the intervention of the highest strength than the fear of his opponents inspired. Then it was a paper bag and oil lamp. The principle of the flight of the celestial flashlight is easy to explain. The flame of the burner heats the air under the dome, its density and mass decrease. Since the air inside becomes easier outdoor, the flashlight takes off.

Scheme of chinese lantern

Heavenly Fnarik is renovated at a height of 200-500 meters

The successful trajectory of flight depends on the correct calculation of the ratio of the gravity and force of Archimedes. Balloons take off the same law.

What makes a variety

Traditionally, the lantern frame was performed from bamboo. Now the designs are adapted to Europe, so it uses any tree or rod from a light metal. At the bottom of the layout there is a burner. It is made on the likeness of the wick: Cotton fabric or porous paper impregnated with wax or exhaled in flammable liquids. In modern models, there may be combustible polymers in this place.

Heart shaped paper lantern

Heart-shaped flashlights launch lovers to declare their feelings

According to the rules, the dome is manufactured from rice paper, which is treated with a special solution to avoid fire. The form of lanterns can be different: from ordinary geometric shapes to an image of animals.

How to make a chinese paper flashlight with your own hands

Nowadays, lanterns are often used not only to run into the sky, but also in decorative purposes. And since Asia is particularly popular, then you can meet these design elements in thematic cafes and restaurants, in the interiors of apartments and design showcases. The launch of the celestial lanterns is no longer considered something exotic and becomes traditional at some celebrations. You can make yourself not only a simple ornamental model, but also a flying design.

Simple version in the technique of Kirigami

Required materials and tools:

  • Color cardboard format A4 - 2 sheets;
  • line;
  • pencil;
  • stationery knife;
  • glue.
Two layouts for paper lanterns

You can use a ready-made lantern pattern or draw your

Step-by-step instruction:

  1. Along the large sides, spend the lines at a distance of 1.5 cm from the edge.
  2. On these lines, put marks through each centimeter.
  3. Connect dots with straight lines.
  4. At the noted strips to make cuts using the stationery knife and ruler.
  5. According to the previously drawn along the edge of the parallel to make bend.
  6. Connect the edges of the paper, forming a cylinder, glue them.
  7. The width of the second sheet A4 is reduced to 13 cm and also connect the edges by forming a cylinder.
  8. Insert the resulting form inside the carved, give the flashlight the completed view, securing the glue paper.

Video: Simple colored paper lantern

Round flashlight

Required materials and tools:

  • pattern on red paper;
  • cardboard under the pattern;
  • elements for the decor of gold color;
  • cord (preferably from silk threads);
  • threads;
  • needle;
  • Scotch;
  • scissors.
Round flashlight

Round flashlight is best suited for creating an interior in Asian style

Step-by-step instruction:

  1. Stick pattern on cardboard sheet.
  2. Decorate the future lantern with decorative details on the topic.
  3. Cut mandal.
  4. Connect the ends of the template, fasten with scotch.
  5. Tie the thread alternately opposite elements patterns, forming a ball.
  6. From the cord make a brush and attach it to the flashlight.

Video: how to make a Chinese lantern

Flying flashlight

Required materials and tools:

  • Thin wooden sticks - 4 pcs.;
  • Paper napkin - 1 pc.;
  • alcohol burner;
  • wire;
  • candle;
  • Scotch;
  • threads;
  • package for garbage with a volume of 60 l - 2 pcs.;
  • scissors.
Flying flashlight

In China, flying lanterns even on serial transparency make manually

Step-by-step instruction:

  1. Napkin cut into 4 parts and fold them with a stack.
  2. Melt the candle on the alcohol burner. The resulting liquid paraffin pour the napkin and wait for frozen.
  3. Tie the ends of wooden raysin threads forming a circle.
  4. One package to cut the sealed side.
  5. Connect two packages among themselves, securing them with scotch. Thus, the size of the dome is lengthened.
  6. Insert a wooden circle into the package and fix the scotch.
  7. To the frame to fasten 2 wire diagonally crosswise.
  8. In the place of the crossing the wire fasten the burner.
  9. When starting, first warm the air inside the dome, then release the design. Follow safety rules.

Video: Heavenly flashlight do it yourself

https://youtube.com/watch?v=2cx-fevdfiq

Precautions

In many countries, the launch of heavenly flashlights is prohibited at the legislative level. To avoid environmental consequences, the Committee on the Littleness, Law Enforcement and Security Committee, as well as the Environmental Protection Committee, Environmental Protection and the Environmental Safety of the Russian Federation, does not recommend using flying lanterns and similar designs.

Because of the burning devices launched by people, fires in the forests, fields and houses happened. A wire frame of a fallen lamp is a danger to small animals that can get into this trap. Changes in the rules of the fire regime of the Russian Federation prohibit the launch in the sky of burning structures. For violators, a fine is registered.

Running lanterns

According to the Chinese tradition, heavenly lanterns are launched to "put their requests and desires in the ears of the Divine"

When planning measures with the mass use of heavenly flashlights, coordination with the relevant authorities is necessary. The main security measures should also be adhered to:

  • Run to produce in open areas where you can track the drop in the design;
  • It is forbidden to launch them into windy weather, as well as near residential arrays, airports and fire hazardous buildings;
  • To have the ability to control the full extension and track the fall location, you need to use a small amount of fuel component.

The launch ceremony into the sky of magic lights has turned into a fascinating custom. He came to us from fabulous Asia and massively spread over Europe since 2005 after the tragic earthquake in the Indian Ocean in 2004.

Chinese lanterns can be made part of the interior or decoration the thematic party. For their manufacture, available materials and minimum effort are required. The main thing is to comply with the safety rules, then they will only bring joy.

Rate article:

(0 votes, average: 0 out of 5)

Share with friends!

Each of us I want to touch something magic. Or create it yourself. We want to offer you an unusual, but this is no less interesting option - to tell how to make a Chinese paper flashlight with your own hands. Such a flashlight will always be appropriate to look at any holiday by adding a note of magic and romance.

How to make a flashlight?

Let's deal with how to do it. Chinese flashlight is not such a complicated fake. You will need time, patience and simple material.

In principle, an elementary and uncomplicated flashlight can do anyone, even a child. By the way, boldly attract children, this occupation will not only be interesting for them, but also useful.

Carefully examining the various photos of the flashlight made by their own hands, we made a small instruction on its creation.

You will need colored paper, glue, thread and fantasy.

Take a sheet of paper of any color, connect it and glue. If you wish, you can draw something on it with markers. You can trust the child. Believe me, the children will do it very passionately.

Then cut the rectangular stripes 2 cm wide. And glue them to the edges of the workpiece. You will stay to adapt ribbons and hang your flashlight at any convenient location.

The second option that we want to offer is to make the easiest version of a paper chinese lantern.

You can make sure, presenting a picture in my head, and you can draw a scheme on a sheet of paper to create a Chinese flashlight with your own hands, so that the process of making crafts has become even easier.

This option we remember from kindergarten. You can use any colored paper.

  • We fold the sheet in half, and cut across the middle almost to the end, leaving 1.5 cm.
  • Then we decline the sheet, the ends are melted with glue and connect them.
  • In the workpiece we embed a paper tube. In length, it should be shorter than the main design. Beautiful will be if you use a sheet of another color.

All, Chinese paper flashlight with their own hands ready.

As you can see, everything is very simple. And in the end, it turns out a very cute and romantic flashlight, which you can decorate, for example, a New Year tree, how to do it in China. It was from there and came to us such a tradition.

Round Chinese Flashlight

This option is the most interesting lantern. Round flashlight is a National Element of Japanese Culture. Next we will tell you how to make a round Chinese flashlight with your own hands

Paper selection

First, determine which height you want to get a finished product. We would advise you no more than one meter, it will quite be enough for your flashlight to take off and not lost.

As a basis, take a round traditional form.

The most important thing is to choose the right material and paper paper. It should be durable, soft, light and thin. These qualities will affect how your flashlight takes off.

Tip: Do not take paper weighing more than 25 gr. On m2, otherwise the flashlight will not rise into the air.

The most important stage behind, you chose paper, you can now go to preparation.

Stage of preparation

The first thing to be done is to handle paper with a special substance that prevents the balloon to the ball and protecting from wetting.

If you make a flashlight size of 1 meter, then cut the sheet into 4 parts, 100 cm in size by 80 cm. Spread them between them with the usual PVA glue.

Burner

The next item will be the manufacture of burner. It is necessary for the fact that your flashlight rose beautifully into the sky. It is done very simple. Melt the wax and place the sliced ​​soft cloth for impregnation into it.

Then you need to wait until the wax will cool, and in principle, we can assume that the process of creating a flashlight is almost complete.

Frame

Now we take the needles, wind up with two foil tubes and fold them crosswise, and put the burner to the center. To secure the design, fix copper wire.

At the end, do not miss the fact that the recess for the burner must be well consolidated so that the paraffin does not flow.

Then, connect the entire design to a holistic flashlight with a stapler or a tape.

In general, make a Chinese flashlight with their own hands will not work, and the result will exceed all your expectations.

Now it will remain to choose a suitable day and enjoy this romantic moment that will easily complement any event. The best thing, of course, do it in the evening.

We reviewed with you the three most popular ways of manufacturing a Chinese paper lantern. In fact, there are a lot of them, but these options attract their simplicity and availability of material for such an interesting craft.

Photo of chinese lanterns do it yourself

Help the site, make the repost;)

Reads: 4 630

Time to read: 8 min.

Beautiful Christmas decoration, which came to European countries from Middle Kingdom - Paper Lanterns. Maching them, the family will be fun and with benefit to spend time. From the finished flashlights you can make a garland, decorated with a Christmas tree or simply weld single instances on the room. It has long been our ancestors believed that this decor calls for a good luck.

This article presents six master classes for the manufacture of Chinese paper lanterns with their own hands of various complexity with photos and schemes. Select the appropriate option according to personal preferences, and completely transform your home to the new year.

Traditional

With the traditional version of this needlework, you probably are familiar with childhood. For the manufacture of familiar paper lanterns you will need colored paper, silicate stationery and scissors.

Step-by-step instruction consists of the following steps:

  1. Prepare two sheets of colored paper, and one must be less than the second in width by 10-15 mm. This is necessary to create a double wall. If you want to make an ordinary flashlight, you can take a piece of any size (based on what dimensions are needed by the lantern).
  2. Big leaf bend in half and care from the middle to the sides, do not renew 10 mm to the edges. In this case, the width of the sheets should be the same - no more than 10 mm. It is better to draw long and uniform lines in advance with a pencil and ruler.
  3. Open the sheet and twist it into the tube along the length. Little leaf is also twisted into the tube, glue and insert a bigger one. Clay the top and bottom.
  4. To hang the finished decoration, carefully pinched its top and secure the loop from the wire. You can also stick a paper handle with a thickness of 1 cm.

Inside the finished paper lantern, you can put the electrical candle and use it as a lampshar in the bedroom or a children's room. It will form a pleasant New Year's atmosphere. If you instead of conventional white paper, take multi-colored or with a decor, decorate the finished product with ribbons, glitter, figures, asterisks, etc., in which case it will look much more effectively.

Figured

To make the following form of a flashlight, you will need only one-photo paper of different shades, a tape or thread under color, a needle or hole panel (depending on what you have in stock).

Instructions, how to make a Christmas lantern from paper with your own hands:

  1. Fold a rectangular sheet into the harmonica, each layer is pretty much. Preparing the harmonica spread.
  2. Punch or needle Do the hole in the middle on each face at a uniform distance from the edges.
  3. Bend paper sheet in the middle in the width, then straighten and do the same as the other side.
  4. In the finished holes at the top and lower insert a thread. Tension a bit, so the product is narrowed at the edges. Cut the bottom thread, and turn the top to the loop. All!

It is best to use these lanterns as follows: Wear on every LED garland, awesome at home. It will make the lighting softer, and the product is original.

Multi-layered

If a simple model does not suit you, you can make it in a more complex variation. It has a nontrivial form and requires high accuracy in the manufacture. To work, you will need the following materials and tools: a beautiful stand from durable and dense wire, cardboard of various shades, double-sided tape and stationery scissors. Instead of cardboard, you can take the wallpapers that remained after repair.

Manufacturing instructions:

  1. Cut up to 15 semicircles with a diameter of 10 cm. It is very important to make them identical size and smoothly cut off. Pay attention to the more you cut out and glued the templates, the fluffy will be the final product.
  2. Next, each circle is flexing in half into the side with the print.
  3. Connect round blanks into a single product.
  4. Next, the core of the flashlight glove and connect the two last sides to fix the design. To hang the finished decoration, do the thickness of the thick needle at the top and the tight of the loop.

Spherical

Small lanterns, which, in their shape, resemble circles and cut out of paper, can be used as Christmas decorations. The process of their manufacture is simple and light. To do this, you will need cardboard of different colors or tight paper for packaging, hole punch, scissors, pencil, line and two buttons (by type of those used for clothing).

Step-by-step instruction consists of the following steps:

  1. Multicolored paper cut on thin long strips in a width of no more than 10 mm. On average, they must be up to 15 pieces. Please note if you take less strips, there will be small lumets in the New Year's lanterns. If the strips are greater than necessary, they are ugly allocate in a circle.
  2. Next, at a uniform distance to 0.5 cm from the edge, do the holes on both sides of the paper tape.
  3. Fold several pieces into a stack and secure rivets along the holes are not very tight so that they can scroll. Taking them and fixing alternately, make a ball.

Such a ball can also be made in another way - with the help of thread. To do this, cut the paper on the line and do the holes in each of them at a distance of 0.5 cm from the edges. Insert the thread from below, hide it under the sticker. The second end end pulls through another hole and slightly pull the design so that the strips are arcuate.

You can hang a small tassel for the remaining segment or form a nodule, and then take the sticker. After that, divide the ribbons around the thread so that the sphere is. As a result, you will get amazing cardboard lanterns with your own hands.

In the form of a drop

The principle of manufacturing the Chinese lantern of this type is extremely simple. To do this, it is necessary to cut up to 20 blanks in the form of a drop, roll them in half, and then glued by the sides to each other in one solid product. To hang it, insert it into the center of the tape and take the bottom of the node, and on top of the loop.

Non-united monophonic Chinese lanterns look quite boring. Therefore, you can transform their design at your own discretion:

  • Make an openwork pattern.
  • Add a small tassel at the bottom.
  • Use print paper.
  • Lubricate the finished product with glue and generously sprinkle with the glitter.
  • Stylize blanks for some items.

In the form of a house

The above methods of making Chinese lanterns are quite simple. But we also want to offer you a master class, which will teach to make a more complex decoration in the form of a real house. We like the template we recommend saving from the Internet. If you did not find something suitable, draw your own workpiece.

For the manufacture of openwork lamp in the form of a house you will need a dense cardboard, a stationery knife, a thin tracing or a loose fabric, a destruction for cutting paper, plow glue. For decorating it is recommended to make paint, glitter, glitter, lace, etc. If you want to make inside the LED backlight, then the finished product and without jewelry will look just wonderful.

Instruction:

  1. The stationery knife on the board needs to cut the template from cardboard with drawing small parts;
  2. Next, bend the finished sides by the fifth lines;
  3. On the inner sides of the flashlight you need to stick a traction or cloth so that it is imitation of the window;
  4. Next, placed inside the light source, for example, an electrical candle (thanks to the tissue or tank, the bright light will be relaxed and scattered);
  5. Pack the finished house and attach a loop for hanging if necessary.

By the same principle, you can cut the house-lantern for the new year with your own hands with a lot of faces or with classic windows and a two-tie roof.

0 comments

Добавить комментарий